netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kristian Evensen <kristian.evensen@gmail.com>
To: netdev@vger.kernel.org, linux-usb@vger.kernel.org, bjorn@mork.no
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Subject: [PATCH] qmi_wwan: Set random MAC on devices with buggy fw
Date: Fri,  2 Jan 2015 16:21:45 +0100	[thread overview]
Message-ID: <1420212105-20278-1-git-send-email-kristian.evensen@gmail.com> (raw)

From: Kristian Evensen <kristian.evensen@gmail.com>

Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This
makes for example checking devices for random MAC addresses tricky, and you
might end up with multiple network interfaces with the same address.

This patch tries to fix, or at least improve, the situation by setting the MAC
address of devices with this firmware bug to a random address. I tested the
patch with two devices that has this firmware bug (Huawei E398 and E392), and
network traffic worked fine after changing the address.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
---
 drivers/net/usb/qmi_wwan.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index db21af8..30a716f 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -56,6 +56,8 @@ struct qmi_wwan_state {
 /* default ethernet address used by the modem */
 static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
 
+static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
+
 /* Make up an ethernet header if the packet doesn't have one.
  *
  * A firmware bug common among several devices cause them to send raw
@@ -332,10 +334,12 @@ next_desc:
 		usb_driver_release_interface(driver, info->data);
 	}
 
-	/* Never use the same address on both ends of the link, even
-	 * if the buggy firmware told us to.
+	/* Never use the same address on both ends of the link, even if the
+	 * buggy firmware told us to. Or, if device is assigned the well-known
+	 * buggy firmware MAC address, replace it with a random address,
 	 */
-	if (ether_addr_equal(dev->net->dev_addr, default_modem_addr))
+	if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
+	    ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
 		eth_hw_addr_random(dev->net);
 
 	/* make MAC addr easily distinguishable from an IP header */
-- 
1.9.1

             reply	other threads:[~2015-01-02 15:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-02 15:21 Kristian Evensen [this message]
2015-01-02 21:42 ` [PATCH] qmi_wwan: Set random MAC on devices with buggy fw David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420212105-20278-1-git-send-email-kristian.evensen@gmail.com \
    --to=kristian.evensen@gmail.com \
    --cc=bjorn@mork.no \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).