netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Anjali Singhai <anjali.singhai@intel.com>,
	netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
	jogreene@redhat.com, Greg Rose <gregory.v.rose@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net 3/3] i40e: Fix bug with TCP over IPv6 over VXLAN
Date: Tue,  6 Jan 2015 00:44:24 -0800	[thread overview]
Message-ID: <1420533864-13125-4-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1420533864-13125-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Anjali Singhai <anjali.singhai@intel.com>

The driver was examining the outer protocol layer to set the inner protocol
layer checksum offload.  In the case of TCP over IPV6 over an IPv4 based
VXLAN the inner checksum offloads would be set to look for IPv4/UDP instead
of IPv6/TCP.  This code fixes that so that the driver will look at the
proper layer for encapsulation offload settings.

Signed-off-by: Anjali Singhai <anjali.singhai@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 2f19ea5..35696ab 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1866,17 +1866,16 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	if (err < 0)
 		return err;
 
-	if (protocol == htons(ETH_P_IP)) {
-		iph = skb->encapsulation ? inner_ip_hdr(skb) : ip_hdr(skb);
+	iph = skb->encapsulation ? inner_ip_hdr(skb) : ip_hdr(skb);
+	ipv6h = skb->encapsulation ? inner_ipv6_hdr(skb) : ipv6_hdr(skb);
+
+	if (iph->version == 4) {
 		tcph = skb->encapsulation ? inner_tcp_hdr(skb) : tcp_hdr(skb);
 		iph->tot_len = 0;
 		iph->check = 0;
 		tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
 						 0, IPPROTO_TCP, 0);
-	} else if (skb_is_gso_v6(skb)) {
-
-		ipv6h = skb->encapsulation ? inner_ipv6_hdr(skb)
-					   : ipv6_hdr(skb);
+	} else if (ipv6h->version == 6) {
 		tcph = skb->encapsulation ? inner_tcp_hdr(skb) : tcp_hdr(skb);
 		ipv6h->payload_len = 0;
 		tcph->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
@@ -1972,13 +1971,9 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 tx_flags,
 					 I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
 			}
 		} else if (tx_flags & I40E_TX_FLAGS_IPV6) {
-			if (tx_flags & I40E_TX_FLAGS_TSO) {
-				*cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV6;
+			*cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV6;
+			if (tx_flags & I40E_TX_FLAGS_TSO)
 				ip_hdr(skb)->check = 0;
-			} else {
-				*cd_tunneling |=
-					 I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
-			}
 		}
 
 		/* Now set the ctx descriptor fields */
@@ -1988,7 +1983,10 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 tx_flags,
 				   ((skb_inner_network_offset(skb) -
 					skb_transport_offset(skb)) >> 1) <<
 				   I40E_TXD_CTX_QW0_NATLEN_SHIFT;
-
+		if (this_ip_hdr->version == 6) {
+			tx_flags &= ~I40E_TX_FLAGS_IPV4;
+			tx_flags |= I40E_TX_FLAGS_IPV6;
+		}
 	} else {
 		network_hdr_len = skb_network_header_len(skb);
 		this_ip_hdr = ip_hdr(skb);
-- 
1.9.3

  parent reply	other threads:[~2015-01-06  8:44 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-06  8:44 [net 0/3][pull request] Intel Wired LAN Driver Updates 2015-01-06 Jeff Kirsher
2015-01-06  8:44 ` [net 1/3] i40e: fix un-necessary Tx hangs Jeff Kirsher
2015-01-06 17:04   ` Jesse Brandeburg
2015-01-06 18:31     ` David Miller
2015-01-06  8:44 ` [net 2/3] i40e: Fix Rx checksum error counter Jeff Kirsher
2015-01-06  8:44 ` Jeff Kirsher [this message]
2015-01-06 18:31 ` [net 0/3][pull request] Intel Wired LAN Driver Updates 2015-01-06 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420533864-13125-4-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=anjali.singhai@intel.com \
    --cc=davem@davemloft.net \
    --cc=gregory.v.rose@intel.com \
    --cc=jogreene@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).