From: Ying Xue <ying.xue@windriver.com>
To: <davem@davemloft.net>
Cc: jon.maloy@ericsson.com, netdev@vger.kernel.org,
ericalp@ericsson.com, Paul.Gortmaker@windriver.com,
tipc-discussion@lists.sourceforge.net
Subject: [PATCH net-next] tipc: remove redundant timer defined in tipc_sock struct
Date: Tue, 13 Jan 2015 17:07:48 +0800 [thread overview]
Message-ID: <1421140068-3614-1-git-send-email-ying.xue@windriver.com> (raw)
Remove the redundant timer defined in tipc_sock structure, instead we
can directly reuse the sk_timer defined in sock structure.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
---
net/tipc/socket.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 2cec496..c9c34a6 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -69,7 +69,6 @@
* @pub_count: total # of publications port has made during its lifetime
* @probing_state:
* @probing_intv:
- * @timer:
* @port: port - interacts with 'sk' and with the rest of the TIPC stack
* @peer_name: the peer of the connection, if any
* @conn_timeout: the time we can wait for an unresponded setup request
@@ -94,7 +93,6 @@ struct tipc_sock {
u32 pub_count;
u32 probing_state;
unsigned long probing_intv;
- struct timer_list timer;
uint conn_timeout;
atomic_t dupl_rcvcnt;
bool link_cong;
@@ -360,7 +358,7 @@ static int tipc_sk_create(struct net *net, struct socket *sock,
return -EINVAL;
}
msg_set_origport(msg, tsk->portid);
- setup_timer(&tsk->timer, tipc_sk_timeout, (unsigned long)tsk);
+ setup_timer(&sk->sk_timer, tipc_sk_timeout, (unsigned long)tsk);
sk->sk_backlog_rcv = tipc_backlog_rcv;
sk->sk_rcvbuf = sysctl_tipc_rmem[1];
sk->sk_data_ready = tipc_data_ready;
@@ -514,7 +512,8 @@ static int tipc_release(struct socket *sock)
tipc_sk_withdraw(tsk, 0, NULL);
probing_state = tsk->probing_state;
- if (del_timer_sync(&tsk->timer) && probing_state != TIPC_CONN_PROBING)
+ if (del_timer_sync(&sk->sk_timer) &&
+ probing_state != TIPC_CONN_PROBING)
sock_put(sk);
tipc_sk_remove(tsk);
if (tsk->connected) {
@@ -1136,7 +1135,8 @@ static int tipc_send_packet(struct kiocb *iocb, struct socket *sock,
static void tipc_sk_finish_conn(struct tipc_sock *tsk, u32 peer_port,
u32 peer_node)
{
- struct net *net = sock_net(&tsk->sk);
+ struct sock *sk = &tsk->sk;
+ struct net *net = sock_net(sk);
struct tipc_msg *msg = &tsk->phdr;
msg_set_destnode(msg, peer_node);
@@ -1148,8 +1148,7 @@ static void tipc_sk_finish_conn(struct tipc_sock *tsk, u32 peer_port,
tsk->probing_intv = CONN_PROBING_INTERVAL;
tsk->probing_state = TIPC_CONN_OK;
tsk->connected = 1;
- if (!mod_timer(&tsk->timer, jiffies + tsk->probing_intv))
- sock_hold(&tsk->sk);
+ sk_reset_timer(sk, &sk->sk_timer, jiffies + tsk->probing_intv);
tipc_node_add_conn(net, peer_node, tsk->portid, peer_port);
tsk->max_pkt = tipc_node_get_mtu(net, peer_node, tsk->portid);
}
@@ -2141,8 +2140,7 @@ static void tipc_sk_timeout(unsigned long data)
0, peer_node, tn->own_addr,
peer_port, tsk->portid, TIPC_OK);
tsk->probing_state = TIPC_CONN_PROBING;
- if (!mod_timer(&tsk->timer, jiffies + tsk->probing_intv))
- sock_hold(sk);
+ sk_reset_timer(sk, &sk->sk_timer, jiffies + tsk->probing_intv);
}
bh_unlock_sock(sk);
if (skb)
--
1.7.9.5
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
next reply other threads:[~2015-01-13 9:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 9:07 Ying Xue [this message]
2015-01-13 21:46 ` [PATCH net-next] tipc: remove redundant timer defined in tipc_sock struct David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421140068-3614-1-git-send-email-ying.xue@windriver.com \
--to=ying.xue@windriver.com \
--cc=Paul.Gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=ericalp@ericsson.com \
--cc=jon.maloy@ericsson.com \
--cc=netdev@vger.kernel.org \
--cc=tipc-discussion@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).