[PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[Tony Lindgren]

Commit 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support")
added support for runtime PM, but it causes issues on omap3 related devices
that actually gate the clocks:

Unhandled fault: external abort on non-linefetch (0x1008)
...
[<c04160f0>] (emac_dev_getnetstats) from [<c04d6a3c>] (dev_get_stats+0x78/0xc8)
[<c04d6a3c>] (dev_get_stats) from [<c04e9ccc>] (rtnl_fill_ifinfo+0x3b8/0x938)
[<c04e9ccc>] (rtnl_fill_ifinfo) from [<c04eade4>] (rtmsg_ifinfo+0x68/0xd8)
[<c04eade4>] (rtmsg_ifinfo) from [<c04dd35c>] (register_netdevice+0x3a0/0x4ec)
[<c04dd35c>] (register_netdevice) from [<c04dd4bc>] (register_netdev+0x14/0x24)
[<c04dd4bc>] (register_netdev) from [<c041755c>] (davinci_emac_probe+0x408/0x5c8)
[<c041755c>] (davinci_emac_probe) from [<c0396d78>] (platform_drv_probe+0x48/0xa4)

Let's fix it by moving the pm_runtime_get() call earlier, and also
add it to the emac_dev_getnetstats(). Also note that we want to use
pm_rutime_get_sync() as we don't want to have deferred_resume happen.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 383ed52..deb43b3 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1538,7 +1538,7 @@ static int emac_dev_open(struct net_device *ndev)
 	int i = 0;
 	struct emac_priv *priv = netdev_priv(ndev);
 
-	pm_runtime_get(&priv->pdev->dev);
+	pm_runtime_get_sync(&priv->pdev->dev);
 
 	netif_carrier_off(ndev);
 	for (cnt = 0; cnt < ETH_ALEN; cnt++)
@@ -1726,6 +1726,8 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 	u32 mac_control;
 	u32 stats_clear_mask;
 
+	pm_runtime_get_sync(&priv->pdev->dev);
+
 	/* update emac hardware stats and reset the registers*/
 
 	mac_control = emac_read(EMAC_MACCONTROL);
@@ -1767,6 +1769,8 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 	ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
 	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
 
+	pm_runtime_put(&priv->pdev->dev);
+
 	return &ndev->stats;
 }
 
@@ -1981,12 +1985,16 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	ndev->ethtool_ops = &ethtool_ops;
 	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 	rc = register_netdev(ndev);
 	if (rc) {
 		dev_err(&pdev->dev, "error in register_netdev\n");
 		rc = -ENODEV;
+		pm_runtime_put(&pdev->dev);
 		goto no_cpdma_chan;
 	}
 
@@ -1996,9 +2004,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 			   "(regs: %p, irq: %d)\n",
 			   (void *)priv->emac_base_phys, ndev->irq);
 	}
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume(&pdev->dev);
+	pm_runtime_put(&pdev->dev);
 
 	return 0;
 
-- 
2.1.4

Re: [PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2032 bytes --]

On Tue, Jan 13, 2015 at 11:29:24AM -0800, Tony Lindgren wrote:
> Commit 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support")
> added support for runtime PM, but it causes issues on omap3 related devices
> that actually gate the clocks:
> 
> Unhandled fault: external abort on non-linefetch (0x1008)
> ...
> [<c04160f0>] (emac_dev_getnetstats) from [<c04d6a3c>] (dev_get_stats+0x78/0xc8)
> [<c04d6a3c>] (dev_get_stats) from [<c04e9ccc>] (rtnl_fill_ifinfo+0x3b8/0x938)
> [<c04e9ccc>] (rtnl_fill_ifinfo) from [<c04eade4>] (rtmsg_ifinfo+0x68/0xd8)
> [<c04eade4>] (rtmsg_ifinfo) from [<c04dd35c>] (register_netdevice+0x3a0/0x4ec)
> [<c04dd35c>] (register_netdevice) from [<c04dd4bc>] (register_netdev+0x14/0x24)
> [<c04dd4bc>] (register_netdev) from [<c041755c>] (davinci_emac_probe+0x408/0x5c8)
> [<c041755c>] (davinci_emac_probe) from [<c0396d78>] (platform_drv_probe+0x48/0xa4)
> 
> Let's fix it by moving the pm_runtime_get() call earlier, and also
> add it to the emac_dev_getnetstats(). Also note that we want to use
> pm_rutime_get_sync() as we don't want to have deferred_resume happen.
> 
> Cc: Brian Hutchinson <b.hutchman@gmail.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Mark A. Greer <mgreer@animalcreek.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  drivers/net/ethernet/ti/davinci_emac.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
> index 383ed52..deb43b3 100644
> --- a/drivers/net/ethernet/ti/davinci_emac.c
> +++ b/drivers/net/ethernet/ti/davinci_emac.c
> @@ -1538,7 +1538,7 @@ static int emac_dev_open(struct net_device *ndev)
>  	int i = 0;
>  	struct emac_priv *priv = netdev_priv(ndev);
>  
> -	pm_runtime_get(&priv->pdev->dev);
> +	pm_runtime_get_sync(&priv->pdev->dev);

gotta check return value on all pm_runtime_get_sync() calls. IIRC,
there's a coccinelle script for checking and patching this.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[Tony Lindgren]

* Felipe Balbi <balbi@ti.com> [150113 11:55]:
> On Tue, Jan 13, 2015 at 11:29:24AM -0800, Tony Lindgren wrote:
> > --- a/drivers/net/ethernet/ti/davinci_emac.c
> > +++ b/drivers/net/ethernet/ti/davinci_emac.c
> > @@ -1538,7 +1538,7 @@ static int emac_dev_open(struct net_device *ndev)
> >  	int i = 0;
> >  	struct emac_priv *priv = netdev_priv(ndev);
> >  
> > -	pm_runtime_get(&priv->pdev->dev);
> > +	pm_runtime_get_sync(&priv->pdev->dev);
> 
> gotta check return value on all pm_runtime_get_sync() calls. IIRC,
> there's a coccinelle script for checking and patching this.

Sure, here's an updated patch with error checking added.

Regards,

Tony

8< ---------------------
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 22 Dec 2014 08:19:06 -0800
Subject: [PATCH] net: davinci_emac: Fix runtime pm calls for davinci_emac

Commit 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support")
added support for runtime PM, but it causes issues on omap3 related devices
that actually gate the clocks:

Unhandled fault: external abort on non-linefetch (0x1008)
...
[<c04160f0>] (emac_dev_getnetstats) from [<c04d6a3c>] (dev_get_stats+0x78/0xc8)
[<c04d6a3c>] (dev_get_stats) from [<c04e9ccc>] (rtnl_fill_ifinfo+0x3b8/0x938)
[<c04e9ccc>] (rtnl_fill_ifinfo) from [<c04eade4>] (rtmsg_ifinfo+0x68/0xd8)
[<c04eade4>] (rtmsg_ifinfo) from [<c04dd35c>] (register_netdevice+0x3a0/0x4ec)
[<c04dd35c>] (register_netdevice) from [<c04dd4bc>] (register_netdev+0x14/0x24)
[<c04dd4bc>] (register_netdev) from [<c041755c>] (davinci_emac_probe+0x408/0x5c8)
[<c041755c>] (davinci_emac_probe) from [<c0396d78>] (platform_drv_probe+0x48/0xa4)

Let's fix it by moving the pm_runtime_get() call earlier, and also add it to
the emac_dev_getnetstats(). Also note that we want to use pm_runtime_get_sync()
as we don't want to have deferred_resume happen. And let's also check the
return value for pm_runtime_get_sync() as noted by Felipe Balbi <balbi@ti.com>.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1538,7 +1538,13 @@ static int emac_dev_open(struct net_device *ndev)
 	int i = 0;
 	struct emac_priv *priv = netdev_priv(ndev);
 
-	pm_runtime_get(&priv->pdev->dev);
+	ret = pm_runtime_get_sync(&priv->pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, ret);
+		return ret;
+	}
 
 	netif_carrier_off(ndev);
 	for (cnt = 0; cnt < ETH_ALEN; cnt++)
@@ -1725,6 +1731,15 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 	struct emac_priv *priv = netdev_priv(ndev);
 	u32 mac_control;
 	u32 stats_clear_mask;
+	int err;
+
+	err = pm_runtime_get_sync(&priv->pdev->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, err);
+		return &ndev->stats;
+	}
 
 	/* update emac hardware stats and reset the registers*/
 
@@ -1767,6 +1782,8 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 	ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
 	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
 
+	pm_runtime_put(&priv->pdev->dev);
+
 	return &ndev->stats;
 }
 
@@ -1981,12 +1998,22 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	ndev->ethtool_ops = &ethtool_ops;
 	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
 
+	pm_runtime_enable(&pdev->dev);
+	rc = pm_runtime_get_sync(&pdev->dev);
+	if (rc < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, rc);
+		goto no_cpdma_chan;
+	}
+
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 	rc = register_netdev(ndev);
 	if (rc) {
 		dev_err(&pdev->dev, "error in register_netdev\n");
 		rc = -ENODEV;
+		pm_runtime_put(&pdev->dev);
 		goto no_cpdma_chan;
 	}
 
@@ -1996,9 +2023,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 			   "(regs: %p, irq: %d)\n",
 			   (void *)priv->emac_base_phys, ndev->irq);
 	}
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume(&pdev->dev);
+	pm_runtime_put(&pdev->dev);
 
 	return 0;
 

Re: [PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 4851 bytes --]

On Tue, Jan 13, 2015 at 12:54:40PM -0800, Tony Lindgren wrote:
> * Felipe Balbi <balbi@ti.com> [150113 11:55]:
> > On Tue, Jan 13, 2015 at 11:29:24AM -0800, Tony Lindgren wrote:
> > > --- a/drivers/net/ethernet/ti/davinci_emac.c
> > > +++ b/drivers/net/ethernet/ti/davinci_emac.c
> > > @@ -1538,7 +1538,7 @@ static int emac_dev_open(struct net_device *ndev)
> > >  	int i = 0;
> > >  	struct emac_priv *priv = netdev_priv(ndev);
> > >  
> > > -	pm_runtime_get(&priv->pdev->dev);
> > > +	pm_runtime_get_sync(&priv->pdev->dev);
> > 
> > gotta check return value on all pm_runtime_get_sync() calls. IIRC,
> > there's a coccinelle script for checking and patching this.
> 
> Sure, here's an updated patch with error checking added.
> 
> Regards,
> 
> Tony
> 
> 8< ---------------------
> From: Tony Lindgren <tony@atomide.com>
> Date: Mon, 22 Dec 2014 08:19:06 -0800
> Subject: [PATCH] net: davinci_emac: Fix runtime pm calls for davinci_emac
> 
> Commit 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support")
> added support for runtime PM, but it causes issues on omap3 related devices
> that actually gate the clocks:
> 
> Unhandled fault: external abort on non-linefetch (0x1008)
> ...
> [<c04160f0>] (emac_dev_getnetstats) from [<c04d6a3c>] (dev_get_stats+0x78/0xc8)
> [<c04d6a3c>] (dev_get_stats) from [<c04e9ccc>] (rtnl_fill_ifinfo+0x3b8/0x938)
> [<c04e9ccc>] (rtnl_fill_ifinfo) from [<c04eade4>] (rtmsg_ifinfo+0x68/0xd8)
> [<c04eade4>] (rtmsg_ifinfo) from [<c04dd35c>] (register_netdevice+0x3a0/0x4ec)
> [<c04dd35c>] (register_netdevice) from [<c04dd4bc>] (register_netdev+0x14/0x24)
> [<c04dd4bc>] (register_netdev) from [<c041755c>] (davinci_emac_probe+0x408/0x5c8)
> [<c041755c>] (davinci_emac_probe) from [<c0396d78>] (platform_drv_probe+0x48/0xa4)
> 
> Let's fix it by moving the pm_runtime_get() call earlier, and also add it to
> the emac_dev_getnetstats(). Also note that we want to use pm_runtime_get_sync()
> as we don't want to have deferred_resume happen. And let's also check the
> return value for pm_runtime_get_sync() as noted by Felipe Balbi <balbi@ti.com>.
> 
> Cc: Brian Hutchinson <b.hutchman@gmail.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Mark A. Greer <mgreer@animalcreek.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

> Signed-off-by: Tony Lindgren <tony@atomide.com>
> 
> --- a/drivers/net/ethernet/ti/davinci_emac.c
> +++ b/drivers/net/ethernet/ti/davinci_emac.c
> @@ -1538,7 +1538,13 @@ static int emac_dev_open(struct net_device *ndev)
>  	int i = 0;
>  	struct emac_priv *priv = netdev_priv(ndev);
>  
> -	pm_runtime_get(&priv->pdev->dev);
> +	ret = pm_runtime_get_sync(&priv->pdev->dev);
> +	if (ret < 0) {
> +		pm_runtime_put_noidle(&priv->pdev->dev);
> +		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
> +			__func__, ret);
> +		return ret;
> +	}
>  
>  	netif_carrier_off(ndev);
>  	for (cnt = 0; cnt < ETH_ALEN; cnt++)
> @@ -1725,6 +1731,15 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
>  	struct emac_priv *priv = netdev_priv(ndev);
>  	u32 mac_control;
>  	u32 stats_clear_mask;
> +	int err;
> +
> +	err = pm_runtime_get_sync(&priv->pdev->dev);
> +	if (err < 0) {
> +		pm_runtime_put_noidle(&priv->pdev->dev);
> +		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
> +			__func__, err);
> +		return &ndev->stats;
> +	}
>  
>  	/* update emac hardware stats and reset the registers*/
>  
> @@ -1767,6 +1782,8 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
>  	ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
>  	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
>  
> +	pm_runtime_put(&priv->pdev->dev);
> +
>  	return &ndev->stats;
>  }
>  
> @@ -1981,12 +1998,22 @@ static int davinci_emac_probe(struct platform_device *pdev)
>  	ndev->ethtool_ops = &ethtool_ops;
>  	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
>  
> +	pm_runtime_enable(&pdev->dev);
> +	rc = pm_runtime_get_sync(&pdev->dev);
> +	if (rc < 0) {
> +		pm_runtime_put_noidle(&pdev->dev);
> +		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
> +			__func__, rc);
> +		goto no_cpdma_chan;
> +	}
> +
>  	/* register the network device */
>  	SET_NETDEV_DEV(ndev, &pdev->dev);
>  	rc = register_netdev(ndev);
>  	if (rc) {
>  		dev_err(&pdev->dev, "error in register_netdev\n");
>  		rc = -ENODEV;
> +		pm_runtime_put(&pdev->dev);
>  		goto no_cpdma_chan;
>  	}
>  
> @@ -1996,9 +2023,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
>  			   "(regs: %p, irq: %d)\n",
>  			   (void *)priv->emac_base_phys, ndev->irq);
>  	}
> -
> -	pm_runtime_enable(&pdev->dev);
> -	pm_runtime_resume(&pdev->dev);
> +	pm_runtime_put(&pdev->dev);
>  
>  	return 0;
>  

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[Mark A. Greer]

On Tue, Jan 13, 2015 at 12:54:40PM -0800, Tony Lindgren wrote:
> * Felipe Balbi <balbi@ti.com> [150113 11:55]:
> > On Tue, Jan 13, 2015 at 11:29:24AM -0800, Tony Lindgren wrote:
> > > --- a/drivers/net/ethernet/ti/davinci_emac.c
> > > +++ b/drivers/net/ethernet/ti/davinci_emac.c
> > > @@ -1538,7 +1538,7 @@ static int emac_dev_open(struct net_device *ndev)
> > >  	int i = 0;
> > >  	struct emac_priv *priv = netdev_priv(ndev);
> > >  
> > > -	pm_runtime_get(&priv->pdev->dev);
> > > +	pm_runtime_get_sync(&priv->pdev->dev);
> > 
> > gotta check return value on all pm_runtime_get_sync() calls. IIRC,
> > there's a coccinelle script for checking and patching this.
> 
> Sure, here's an updated patch with error checking added.
> 
> Regards,
> 
> Tony
> 
> 8< ---------------------
> From: Tony Lindgren <tony@atomide.com>
> Date: Mon, 22 Dec 2014 08:19:06 -0800
> Subject: [PATCH] net: davinci_emac: Fix runtime pm calls for davinci_emac
> 
> Commit 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support")
> added support for runtime PM, but it causes issues on omap3 related devices
> that actually gate the clocks:
> 
> Unhandled fault: external abort on non-linefetch (0x1008)
> ...
> [<c04160f0>] (emac_dev_getnetstats) from [<c04d6a3c>] (dev_get_stats+0x78/0xc8)
> [<c04d6a3c>] (dev_get_stats) from [<c04e9ccc>] (rtnl_fill_ifinfo+0x3b8/0x938)
> [<c04e9ccc>] (rtnl_fill_ifinfo) from [<c04eade4>] (rtmsg_ifinfo+0x68/0xd8)
> [<c04eade4>] (rtmsg_ifinfo) from [<c04dd35c>] (register_netdevice+0x3a0/0x4ec)
> [<c04dd35c>] (register_netdevice) from [<c04dd4bc>] (register_netdev+0x14/0x24)
> [<c04dd4bc>] (register_netdev) from [<c041755c>] (davinci_emac_probe+0x408/0x5c8)
> [<c041755c>] (davinci_emac_probe) from [<c0396d78>] (platform_drv_probe+0x48/0xa4)
> 
> Let's fix it by moving the pm_runtime_get() call earlier, and also add it to
> the emac_dev_getnetstats(). Also note that we want to use pm_runtime_get_sync()
> as we don't want to have deferred_resume happen. And let's also check the
> return value for pm_runtime_get_sync() as noted by Felipe Balbi <balbi@ti.com>.
> 
> Cc: Brian Hutchinson <b.hutchman@gmail.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Mark A. Greer <mgreer@animalcreek.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Tony,

Sorry for the sloppy pm_runtime patch and thanks for fixing it.

Acked-by: Mark A. Greer <mgreer@animalcreek.com>

[PATCHv2 0/6] Fixes for davinci_emac

[Tony Lindgren]

Hi,

Here's a repost of the fixes for davinci_emac with patches
updated for comments and acks collected.

Regards,

Tony

Tony Lindgren (6):
  net: davinci_emac: Fix hangs with interrupts
  net: davinci_emac: Fix runtime pm calls for davinci_emac
  net: davinci_emac: Free clock after checking the frequency
  net: davinci_emac: Fix incomplete code for getting the phy from device
    tree
  net: davinci_emac: Fix ioremap for devices with MDIO within the EMAC
    address space
  net: davinci_emac: Add support for emac on dm816x

 .../devicetree/bindings/net/davinci_emac.txt       |  3 +-
 drivers/net/ethernet/ti/davinci_emac.c             | 96 +++++++++++++++++-----
 2 files changed, 77 insertions(+), 22 deletions(-)

-- 
2.1.4

[PATCH 1/6] net: davinci_emac: Fix hangs with interrupts

[Tony Lindgren]

On davinci_emac, we have pulse interrupts. This means that we need to
clear the EOI bits when disabling interrupts as otherwise the interrupts
keep happening. And we also need to not clear the EOI bits again when
enabling the interrupts as otherwise we will get tons of:

unexpected IRQ trap at vector 00

These errors almost certainly mean that the omap-intc.c is signaling
a spurious interrupt with the reserved irq 127 as we've seen earlier
on omap3.

Let's fix the issue by clearing the EOI bits when disabling the
interrupts. Let's also keep the comment for "Rx Threshold and Misc
interrupts are not enabled" for both enable and disable so people
are aware of this when potentially adding more support.

Note that eventually we should handle the RX and TX interrupts
separately like cpsw is now doing. However, so far I have not seen
any issues with this based on my testing, so it seems to behave a
little different compared to the cpsw that had a similar issue.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index ea71251..383ed52 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -922,6 +922,16 @@ static void emac_int_disable(struct emac_priv *priv)
 		if (priv->int_disable)
 			priv->int_disable();
 
+		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
+
+		/* ack rxen only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_RXEN);
+
+		/* ack txen- only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_TXEN);
+
 		local_irq_restore(flags);
 
 	} else {
@@ -951,15 +961,6 @@ static void emac_int_enable(struct emac_priv *priv)
 		 * register */
 
 		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
-
-		/* ack rxen only then a new pulse will be generated */
-		emac_write(EMAC_DM646X_MACEOIVECTOR,
-			EMAC_DM646X_MAC_EOI_C0_RXEN);
-
-		/* ack txen- only then a new pulse will be generated */
-		emac_write(EMAC_DM646X_MACEOIVECTOR,
-			EMAC_DM646X_MAC_EOI_C0_TXEN);
-
 	} else {
 		/* Set DM644x control registers for interrupt control */
 		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
-- 
2.1.4

[PATCH 2/6] net: davinci_emac: Fix runtime pm calls for davinci_emac

[Tony Lindgren]

Commit 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support")
added support for runtime PM, but it causes issues on omap3 related devices
that actually gate the clocks:

Unhandled fault: external abort on non-linefetch (0x1008)
...
[<c04160f0>] (emac_dev_getnetstats) from [<c04d6a3c>] (dev_get_stats+0x78/0xc8)
[<c04d6a3c>] (dev_get_stats) from [<c04e9ccc>] (rtnl_fill_ifinfo+0x3b8/0x938)
[<c04e9ccc>] (rtnl_fill_ifinfo) from [<c04eade4>] (rtmsg_ifinfo+0x68/0xd8)
[<c04eade4>] (rtmsg_ifinfo) from [<c04dd35c>] (register_netdevice+0x3a0/0x4ec)
[<c04dd35c>] (register_netdevice) from [<c04dd4bc>] (register_netdev+0x14/0x24)
[<c04dd4bc>] (register_netdev) from [<c041755c>] (davinci_emac_probe+0x408/0x5c8)
[<c041755c>] (davinci_emac_probe) from [<c0396d78>] (platform_drv_probe+0x48/0xa4)

Let's fix it by moving the pm_runtime_get() call earlier, and also add it to
the emac_dev_getnetstats(). Also note that we want to use pm_runtime_get_sync()
as we don't want to have deferred_resume happen. And let's also check the
return value for pm_runtime_get_sync() as noted by Felipe Balbi <balbi@ti.com>.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 383ed52..5df339e 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1538,7 +1538,13 @@ static int emac_dev_open(struct net_device *ndev)
 	int i = 0;
 	struct emac_priv *priv = netdev_priv(ndev);
 
-	pm_runtime_get(&priv->pdev->dev);
+	ret = pm_runtime_get_sync(&priv->pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, ret);
+		return ret;
+	}
 
 	netif_carrier_off(ndev);
 	for (cnt = 0; cnt < ETH_ALEN; cnt++)
@@ -1725,6 +1731,15 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 	struct emac_priv *priv = netdev_priv(ndev);
 	u32 mac_control;
 	u32 stats_clear_mask;
+	int err;
+
+	err = pm_runtime_get_sync(&priv->pdev->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, err);
+		return &ndev->stats;
+	}
 
 	/* update emac hardware stats and reset the registers*/
 
@@ -1767,6 +1782,8 @@ static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
 	ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
 	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
 
+	pm_runtime_put(&priv->pdev->dev);
+
 	return &ndev->stats;
 }
 
@@ -1981,12 +1998,22 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	ndev->ethtool_ops = &ethtool_ops;
 	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
 
+	pm_runtime_enable(&pdev->dev);
+	rc = pm_runtime_get_sync(&pdev->dev);
+	if (rc < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, rc);
+		goto no_cpdma_chan;
+	}
+
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 	rc = register_netdev(ndev);
 	if (rc) {
 		dev_err(&pdev->dev, "error in register_netdev\n");
 		rc = -ENODEV;
+		pm_runtime_put(&pdev->dev);
 		goto no_cpdma_chan;
 	}
 
@@ -1996,9 +2023,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 			   "(regs: %p, irq: %d)\n",
 			   (void *)priv->emac_base_phys, ndev->irq);
 	}
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume(&pdev->dev);
+	pm_runtime_put(&pdev->dev);
 
 	return 0;
 
-- 
2.1.4

[PATCH 3/6] net: davinci_emac: Free clock after checking the frequency

[Tony Lindgren]

We only use clk_get() to get the frequency, the rest is done by
the runtime PM calls. Let's free the clock too.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 5df339e..59fdcdd 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1894,6 +1894,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 	emac_bus_frequency = clk_get_rate(emac_clk);
+	devm_clk_put(&pdev->dev, emac_clk);
 
 	/* TODO: Probe PHY here if possible */
 
-- 
2.1.4

[PATCH 4/6] net: davinci_emac: Fix incomplete code for getting the phy from device tree

[Tony Lindgren]

Looks like the phy_id is never set up beyond getting the phandle.
Note that we can remove the ifdef for phy_node as there is a stub
for of_phy_connec() if CONFIG_OF is not set.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 59fdcdd..e44c8d8 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -62,6 +62,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_mdio.h>
 #include <linux/of_irq.h>
 #include <linux/of_net.h>
 
@@ -343,9 +344,7 @@ struct emac_priv {
 	u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
 	u32 rx_addr_type;
 	const char *phy_id;
-#ifdef CONFIG_OF
 	struct device_node *phy_node;
-#endif
 	struct phy_device *phydev;
 	spinlock_t lock;
 	/*platform specific members*/
@@ -1603,8 +1602,20 @@ static int emac_dev_open(struct net_device *ndev)
 	cpdma_ctlr_start(priv->dma);
 
 	priv->phydev = NULL;
+
+	if (priv->phy_node) {
+		priv->phydev = of_phy_connect(ndev, priv->phy_node,
+					      &emac_adjust_link, 0, 0);
+		if (!priv->phydev) {
+			dev_err(emac_dev, "could not connect to phy %s\n",
+				priv->phy_node->full_name);
+			ret = -ENODEV;
+			goto err;
+		}
+	}
+
 	/* use the first phy on the bus if pdata did not give us a phy id */
-	if (!priv->phy_id) {
+	if (!priv->phydev && !priv->phy_id) {
 		struct device *phy;
 
 		phy = bus_find_device(&mdio_bus_type, NULL, NULL,
@@ -1613,7 +1624,7 @@ static int emac_dev_open(struct net_device *ndev)
 			priv->phy_id = dev_name(phy);
 	}
 
-	if (priv->phy_id && *priv->phy_id) {
+	if (!priv->phydev && priv->phy_id && *priv->phy_id) {
 		priv->phydev = phy_connect(ndev, priv->phy_id,
 					   &emac_adjust_link,
 					   PHY_INTERFACE_MODE_MII);
@@ -1634,7 +1645,9 @@ static int emac_dev_open(struct net_device *ndev)
 			"(mii_bus:phy_addr=%s, id=%x)\n",
 			priv->phydev->drv->name, dev_name(&priv->phydev->dev),
 			priv->phydev->phy_id);
-	} else {
+	}
+
+	if (!priv->phydev) {
 		/* No PHY , fix the link, speed and duplex settings */
 		dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
 		priv->link = 1;
-- 
2.1.4

[PATCH 5/6] net: davinci_emac: Fix ioremap for devices with MDIO within the EMAC address space

[Tony Lindgren]

Some devices like dm816x have the MDIO registers within the first EMAC
instance address space. Let's fix the issue by allowing to pass an
optional second IO range for the EMAC control register area.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index e44c8d8..1e5ea81 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1890,7 +1890,7 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
 static int davinci_emac_probe(struct platform_device *pdev)
 {
 	int rc = 0;
-	struct resource *res;
+	struct resource *res, *res_ctrl;
 	struct net_device *ndev;
 	struct emac_priv *priv;
 	unsigned long hw_ram_addr;
@@ -1949,11 +1949,20 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		rc = PTR_ERR(priv->remap_addr);
 		goto no_pdata;
 	}
+
+	res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res_ctrl) {
+		priv->ctrl_base =
+			devm_ioremap_resource(&pdev->dev, res_ctrl);
+		if (IS_ERR(priv->ctrl_base))
+			goto no_pdata;
+	} else {
+		priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
+	}
+
 	priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
 	ndev->base_addr = (unsigned long)priv->remap_addr;
 
-	priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
-
 	hw_ram_addr = pdata->hw_ram_addr;
 	if (!hw_ram_addr)
 		hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset;
-- 
2.1.4

[PATCH 6/6] net: davinci_emac: Add support for emac on dm816x

[Tony Lindgren]

On dm816x we have two emac controllers with separate memory
areas.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 Documentation/devicetree/bindings/net/davinci_emac.txt | 3 ++-
 drivers/net/ethernet/ti/davinci_emac.c                 | 5 +++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index 0328088..24c5cda 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -4,7 +4,8 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+  "ti,dm816-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 1e5ea81..5fae435 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -2120,9 +2120,14 @@ static const struct emac_platform_data am3517_emac_data = {
 	.hw_ram_addr		= 0x01e20000,
 };
 
+static const struct emac_platform_data dm816_emac_data = {
+	.version		= EMAC_VERSION_2,
+};
+
 static const struct of_device_id davinci_emac_of_match[] = {
 	{.compatible = "ti,davinci-dm6467-emac", },
 	{.compatible = "ti,am3517-emac", .data = &am3517_emac_data, },
+	{.compatible = "ti,dm816-emac", .data = &dm816_emac_data, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, davinci_emac_of_match);
-- 
2.1.4

Re: [PATCHv2 0/6] Fixes for davinci_emac

[David Miller]

From: Tony Lindgren <tony@atomide.com>
Date: Thu, 15 Jan 2015 14:45:08 -0800

> Here's a repost of the fixes for davinci_emac with patches
> updated for comments and acks collected.

Series applied, thanks Tony.