netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi@ti.com>
To: <davem@davemloft.net>
Cc: Tony Lindgren <tony@atomide.com>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	<mugunthanvnm@ti.com>, <netdev@vger.kernel.org>,
	Felipe Balbi <balbi@ti.com>
Subject: [patch-net-next v3 1/2] net: ethernet: cpsw: unroll IRQ request loop
Date: Fri, 16 Jan 2015 10:11:11 -0600	[thread overview]
Message-ID: <1421424672-19323-1-git-send-email-balbi@ti.com> (raw)

This patch is in preparation for a nicer IRQ
handling scheme where we use different IRQ
handlers for each IRQ line (as it should be).

Later, we will also drop IRQs offset 0 and 3
because they are always disabled in this driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---

no changes

 drivers/net/ethernet/ti/cpsw.c | 62 ++++++++++++++++++++++++++++++++----------
 1 file changed, 47 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index e61ee8351272..8e1af51e4b76 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2156,7 +2156,8 @@ static int cpsw_probe(struct platform_device *pdev)
 	void __iomem			*ss_regs;
 	struct resource			*res, *ss_res;
 	u32 slave_offset, sliver_offset, slave_size;
-	int ret = 0, i, k = 0;
+	int ret = 0, i;
+	int irq;
 
 	ndev = alloc_etherdev(sizeof(struct cpsw_priv));
 	if (!ndev) {
@@ -2345,24 +2346,55 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 	}
 
-	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
-		if (k >= ARRAY_SIZE(priv->irqs_table)) {
-			ret = -EINVAL;
-			goto clean_ale_ret;
-		}
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		goto clean_ale_ret;
 
-		ret = devm_request_irq(&pdev->dev, res->start, cpsw_interrupt,
-				       0, dev_name(&pdev->dev), priv);
-		if (ret < 0) {
-			dev_err(priv->dev, "error attaching irq (%d)\n", ret);
-			goto clean_ale_ret;
-		}
+	priv->irqs_table[0] = irq;
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
+		goto clean_ale_ret;
+	}
 
-		priv->irqs_table[k] = res->start;
-		k++;
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0)
+		goto clean_ale_ret;
+
+	priv->irqs_table[1] = irq;
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
+		goto clean_ale_ret;
+	}
+
+	irq = platform_get_irq(pdev, 2);
+	if (irq < 0)
+		goto clean_ale_ret;
+
+	priv->irqs_table[2] = irq;
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
+		goto clean_ale_ret;
+	}
+
+	irq = platform_get_irq(pdev, 3);
+	if (irq < 0)
+		goto clean_ale_ret;
+
+	priv->irqs_table[3] = irq;
+	ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "error attaching irq (%d)\n", ret);
+		goto clean_ale_ret;
 	}
 
-	priv->num_irqs = k;
+	priv->num_irqs = 4;
 
 	ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
-- 
2.2.0


             reply	other threads:[~2015-01-16 16:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-16 16:11 Felipe Balbi [this message]
2015-01-16 16:11 ` [patch-net-next v3 2/2] net: ethernet: cpsw: don't requests IRQs we don't use Felipe Balbi
2015-01-18  6:07   ` David Miller
2015-01-19 14:40     ` Felipe Balbi
2015-01-19 17:38       ` David Miller
2015-01-18  6:07 ` [patch-net-next v3 1/2] net: ethernet: cpsw: unroll IRQ request loop David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421424672-19323-1-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=davem@davemloft.net \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).