From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: David Ahern <dsahern@gmail.com>,
Scott Feldman <sfeldma@gmail.com>, Jiri Pirko <jiri@resnulli.us>
Subject: [PATCH] net: rocker: Add basic netdev counters - v2
Date: Fri, 16 Jan 2015 14:22:29 -0700 [thread overview]
Message-ID: <1421443349-77718-1-git-send-email-dsahern@gmail.com> (raw)
Add packet and byte counters for RX and TX paths.
$ ifconfig eth1
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5054:ff:fe12:3501 prefixlen 64 scopeid 0x20<link>
ether 52:54:00:12:35:01 txqueuelen 1000 (Ethernet)
RX packets 63 bytes 15813 (15.4 KiB)
RX errors 1 dropped 0 overruns 0 frame 0
TX packets 79 bytes 17991 (17.5 KiB)
TX errors 7 dropped 0 overruns 0 carrier 0 collisions 0
Rx / Tx errors tested by injecting faults in qemu's hardware model for Rocker.
v2:
- moved counter locations to avoid potential use after free per Florian's comment
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Scott Feldman <sfeldma@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
---
drivers/net/ethernet/rocker/rocker.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c
index c5548164d1a8..f9daf67117b9 100644
--- a/drivers/net/ethernet/rocker/rocker.c
+++ b/drivers/net/ethernet/rocker/rocker.c
@@ -3915,6 +3915,8 @@ static netdev_tx_t rocker_port_xmit(struct sk_buff *skb, struct net_device *dev)
rocker_tlv_nest_cancel(desc_info, frags);
out:
dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+
return NETDEV_TX_OK;
}
@@ -4238,12 +4240,22 @@ static int rocker_port_poll_tx(struct napi_struct *napi, int budget)
/* Cleanup tx descriptors */
while ((desc_info = rocker_desc_tail_get(&rocker_port->tx_ring))) {
+ struct sk_buff *skb;
+
err = rocker_desc_err(desc_info);
if (err && net_ratelimit())
netdev_err(rocker_port->dev, "tx desc received with err %d\n",
err);
rocker_tx_desc_frags_unmap(rocker_port, desc_info);
- dev_kfree_skb_any(rocker_desc_cookie_ptr_get(desc_info));
+
+ skb = rocker_desc_cookie_ptr_get(desc_info);
+ if (err == 0) {
+ rocker_port->dev->stats.tx_packets++;
+ rocker_port->dev->stats.tx_bytes += skb->len;
+ } else
+ rocker_port->dev->stats.tx_errors++;
+
+ dev_kfree_skb_any(skb);
credits++;
}
@@ -4276,6 +4288,10 @@ static int rocker_port_rx_proc(struct rocker *rocker,
rx_len = rocker_tlv_get_u16(attrs[ROCKER_TLV_RX_FRAG_LEN]);
skb_put(skb, rx_len);
skb->protocol = eth_type_trans(skb, rocker_port->dev);
+
+ rocker_port->dev->stats.rx_packets++;
+ rocker_port->dev->stats.rx_bytes += skb->len;
+
netif_receive_skb(skb);
return rocker_dma_rx_ring_skb_alloc(rocker, rocker_port, desc_info);
@@ -4309,6 +4325,9 @@ static int rocker_port_poll_rx(struct napi_struct *napi, int budget)
netdev_err(rocker_port->dev, "rx processing failed with err %d\n",
err);
}
+ if (err)
+ rocker_port->dev->stats.rx_errors++;
+
rocker_desc_gen_clear(desc_info);
rocker_desc_head_set(rocker, &rocker_port->rx_ring, desc_info);
credits++;
--
1.9.3 (Apple Git-50)
next reply other threads:[~2015-01-16 21:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-16 21:22 David Ahern [this message]
2015-01-16 23:41 ` [PATCH] net: rocker: Add basic netdev counters - v2 Scott Feldman
2015-01-16 23:48 ` David Ahern
2015-01-17 0:08 ` Scott Feldman
2015-01-18 6:56 ` David Miller
2015-01-17 8:29 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421443349-77718-1-git-send-email-dsahern@gmail.com \
--to=dsahern@gmail.com \
--cc=jiri@resnulli.us \
--cc=netdev@vger.kernel.org \
--cc=sfeldma@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).