[PATCH net-next 2/2] net: dsa: bcm_sf2: factor interrupt disabling in a function

[Florian Fainelli <f.fainelli@gmail.com>]

Factor the interrupt disabling in a function: bcm_sf2_intr_disable()
since we are doing the same thing in the setup and suspend paths.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index feb29c4526f7..09f6b3cc1f66 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -400,6 +400,16 @@ static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
 	return 0;
 }
 
+static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
+{
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+}
+
 static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 {
 	const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
@@ -440,12 +450,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 	}
 
 	/* Disable all interrupts and request them */
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	bcm_sf2_intr_disable(priv);
 
 	ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
 			  "switch_0", priv);
@@ -747,12 +752,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
 	struct bcm_sf2_priv *priv = ds_to_priv(ds);
 	unsigned int port;
 
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	bcm_sf2_intr_disable(priv);
 
 	/* Disable all ports physically present including the IMP
 	 * port, the other ones have already been disabled during
-- 
2.1.0