From: <erik.hugne@ericsson.com>
To: <richard.alpe@ericsson.com>, <netdev@vger.kernel.org>,
<jon.maloy@ericsson.com>, <ying.xue@windriver.com>
Cc: <tipc-discussion@lists.sourceforge.net>,
Erik Hugne <erik.hugne@ericsson.com>
Subject: [PATCH net-next 1/2] tipc: fix excessive network event logging
Date: Thu, 22 Jan 2015 17:10:31 +0100 [thread overview]
Message-ID: <1421943032-29924-1-git-send-email-erik.hugne@ericsson.com> (raw)
From: Erik Hugne <erik.hugne@ericsson.com>
If a large number of namespaces is spawned on a node and TIPC is
enabled in each of these, the excessive printk tracing of network
events will cause the system to grind down to a near halt.
The traces are still of debug value, so instead of removing them
completely we fix it by changing the link state and node availability
logging debug traces.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
---
net/tipc/link.c | 20 ++++++++++----------
net/tipc/node.c | 22 +++++++++++-----------
2 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 193bc15..2846ad80 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -538,8 +538,8 @@ static void link_state_event(struct tipc_link *l_ptr, unsigned int event)
link_set_timer(l_ptr, cont_intv / 4);
break;
case RESET_MSG:
- pr_info("%s<%s>, requested by peer\n", link_rst_msg,
- l_ptr->name);
+ pr_debug("%s<%s>, requested by peer\n",
+ link_rst_msg, l_ptr->name);
tipc_link_reset(l_ptr);
l_ptr->state = RESET_RESET;
l_ptr->fsm_msg_cnt = 0;
@@ -549,7 +549,7 @@ static void link_state_event(struct tipc_link *l_ptr, unsigned int event)
link_set_timer(l_ptr, cont_intv);
break;
default:
- pr_err("%s%u in WW state\n", link_unk_evt, event);
+ pr_debug("%s%u in WW state\n", link_unk_evt, event);
}
break;
case WORKING_UNKNOWN:
@@ -561,8 +561,8 @@ static void link_state_event(struct tipc_link *l_ptr, unsigned int event)
link_set_timer(l_ptr, cont_intv);
break;
case RESET_MSG:
- pr_info("%s<%s>, requested by peer while probing\n",
- link_rst_msg, l_ptr->name);
+ pr_debug("%s<%s>, requested by peer while probing\n",
+ link_rst_msg, l_ptr->name);
tipc_link_reset(l_ptr);
l_ptr->state = RESET_RESET;
l_ptr->fsm_msg_cnt = 0;
@@ -588,8 +588,8 @@ static void link_state_event(struct tipc_link *l_ptr, unsigned int event)
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv / 4);
} else { /* Link has failed */
- pr_warn("%s<%s>, peer not responding\n",
- link_rst_msg, l_ptr->name);
+ pr_debug("%s<%s>, peer not responding\n",
+ link_rst_msg, l_ptr->name);
tipc_link_reset(l_ptr);
l_ptr->state = RESET_UNKNOWN;
l_ptr->fsm_msg_cnt = 0;
@@ -1568,9 +1568,9 @@ static void tipc_link_proto_rcv(struct net *net, struct tipc_link *l_ptr,
if (msg_linkprio(msg) &&
(msg_linkprio(msg) != l_ptr->priority)) {
- pr_warn("%s<%s>, priority change %u->%u\n",
- link_rst_msg, l_ptr->name, l_ptr->priority,
- msg_linkprio(msg));
+ pr_debug("%s<%s>, priority change %u->%u\n",
+ link_rst_msg, l_ptr->name,
+ l_ptr->priority, msg_linkprio(msg));
l_ptr->priority = msg_linkprio(msg);
tipc_link_reset(l_ptr); /* Enforce change to take effect */
break;
diff --git a/net/tipc/node.c b/net/tipc/node.c
index b1eb092..ee5d33c 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -230,8 +230,8 @@ void tipc_node_link_up(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
n_ptr->action_flags |= TIPC_NOTIFY_LINK_UP;
n_ptr->link_id = l_ptr->peer_bearer_id << 16 | l_ptr->bearer_id;
- pr_info("Established link <%s> on network plane %c\n",
- l_ptr->name, l_ptr->net_plane);
+ pr_debug("Established link <%s> on network plane %c\n",
+ l_ptr->name, l_ptr->net_plane);
if (!active[0]) {
active[0] = active[1] = l_ptr;
@@ -239,7 +239,7 @@ void tipc_node_link_up(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
goto exit;
}
if (l_ptr->priority < active[0]->priority) {
- pr_info("New link <%s> becomes standby\n", l_ptr->name);
+ pr_debug("New link <%s> becomes standby\n", l_ptr->name);
goto exit;
}
tipc_link_dup_queue_xmit(active[0], l_ptr);
@@ -247,9 +247,9 @@ void tipc_node_link_up(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
active[0] = l_ptr;
goto exit;
}
- pr_info("Old link <%s> becomes standby\n", active[0]->name);
+ pr_debug("Old link <%s> becomes standby\n", active[0]->name);
if (active[1] != active[0])
- pr_info("Old link <%s> becomes standby\n", active[1]->name);
+ pr_debug("Old link <%s> becomes standby\n", active[1]->name);
active[0] = active[1] = l_ptr;
exit:
/* Leave room for changeover header when returning 'mtu' to users: */
@@ -297,12 +297,12 @@ void tipc_node_link_down(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
n_ptr->link_id = l_ptr->peer_bearer_id << 16 | l_ptr->bearer_id;
if (!tipc_link_is_active(l_ptr)) {
- pr_info("Lost standby link <%s> on network plane %c\n",
- l_ptr->name, l_ptr->net_plane);
+ pr_debug("Lost standby link <%s> on network plane %c\n",
+ l_ptr->name, l_ptr->net_plane);
return;
}
- pr_info("Lost link <%s> on network plane %c\n",
- l_ptr->name, l_ptr->net_plane);
+ pr_debug("Lost link <%s> on network plane %c\n",
+ l_ptr->name, l_ptr->net_plane);
active = &n_ptr->active_links[0];
if (active[0] == l_ptr)
@@ -380,8 +380,8 @@ static void node_lost_contact(struct tipc_node *n_ptr)
char addr_string[16];
u32 i;
- pr_info("Lost contact with %s\n",
- tipc_addr_string_fill(addr_string, n_ptr->addr));
+ pr_debug("Lost contact with %s\n",
+ tipc_addr_string_fill(addr_string, n_ptr->addr));
/* Flush broadcast link info associated with lost node */
if (n_ptr->bclink.recv_permitted) {
--
2.1.3
next reply other threads:[~2015-01-22 16:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-22 16:10 erik.hugne [this message]
2015-01-22 16:10 ` [PATCH net-next 2/2] flow_dissector: add tipc support erik.hugne
2015-01-22 17:29 ` Eric Dumazet
2015-01-22 18:38 ` Jon Maloy
2015-01-27 0:57 ` David Miller
2015-01-27 12:08 ` Erik Hugne
2015-01-27 14:40 ` Eric Dumazet
2015-01-27 1:04 ` David Miller
2015-01-22 17:24 ` [PATCH net-next 1/2] tipc: fix excessive network event logging Joe Perches
2015-01-23 6:44 ` Erik Hugne
2015-01-27 1:04 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421943032-29924-1-git-send-email-erik.hugne@ericsson.com \
--to=erik.hugne@ericsson.com \
--cc=jon.maloy@ericsson.com \
--cc=netdev@vger.kernel.org \
--cc=richard.alpe@ericsson.com \
--cc=tipc-discussion@lists.sourceforge.net \
--cc=ying.xue@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).