From: Guenter Roeck <linux@roeck-us.net>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 01/18] net: dsa: mv88e6xxx: Factor out common initialization code
Date: Sat, 21 Mar 2015 08:46:38 -0700 [thread overview]
Message-ID: <1426952815-4642-2-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1426952815-4642-1-git-send-email-linux@roeck-us.net>
Code used and needed in mv886xxx.c should be initialized there as well,
so factor it out from the individual initialization files.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/dsa/mv88e6123_61_65.c | 7 +++----
drivers/net/dsa/mv88e6171.c | 8 +++-----
drivers/net/dsa/mv88e6352.c | 7 ++++---
drivers/net/dsa/mv88e6xxx.c | 11 +++++++++++
drivers/net/dsa/mv88e6xxx.h | 1 +
5 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index e9c736e..6ebe570 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -293,13 +293,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
static int mv88e6123_61_65_setup(struct dsa_switch *ds)
{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int i;
int ret;
- mutex_init(&ps->smi_mutex);
- mutex_init(&ps->stats_mutex);
- mutex_init(&ps->phy_mutex);
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
ret = mv88e6123_61_65_switch_reset(ds);
if (ret < 0)
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 9808c86..2f6662c 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -292,12 +292,12 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
static int mv88e6171_setup(struct dsa_switch *ds)
{
- struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
int i;
int ret;
- mutex_init(&ps->smi_mutex);
- mutex_init(&ps->stats_mutex);
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
ret = mv88e6171_switch_reset(ds);
if (ret < 0)
@@ -318,8 +318,6 @@ static int mv88e6171_setup(struct dsa_switch *ds)
return ret;
}
- mutex_init(&ps->phy_mutex);
-
return 0;
}
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 7bc5998..75cf9e1 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -385,9 +385,10 @@ static int mv88e6352_setup(struct dsa_switch *ds)
int ret;
int i;
- mutex_init(&ps->smi_mutex);
- mutex_init(&ps->stats_mutex);
- mutex_init(&ps->phy_mutex);
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
mutex_init(&ps->eeprom_mutex);
ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index c18ffc9..6496beb 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -700,6 +700,17 @@ int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
return 0;
}
+int mv88e6xxx_setup_common(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ mutex_init(&ps->smi_mutex);
+ mutex_init(&ps->stats_mutex);
+ mutex_init(&ps->phy_mutex);
+
+ return 0;
+}
+
static int __init mv88e6xxx_init(void)
{
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 5fd42ce..a02d95a 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -57,6 +57,7 @@ struct mv88e6xxx_hw_stat {
int reg;
};
+int mv88e6xxx_setup_common(struct dsa_switch *ds);
int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
--
2.1.0
next prev parent reply other threads:[~2015-03-21 15:47 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-21 15:46 [PATCH 0/18] net: dsa: HW bridging, EEE support Guenter Roeck
2015-03-21 15:46 ` Guenter Roeck [this message]
2015-03-21 15:46 ` [PATCH 02/18] net: dsa: mv88e6xxx: Provide function for common port initialization Guenter Roeck
2015-03-21 22:41 ` Guenter Roeck
2015-03-21 15:46 ` [PATCH 03/18] net: dsa: mv88e6xxx: Disable Message Port bit for CPU port Guenter Roeck
2015-03-21 15:46 ` [PATCH 04/18] net: dsa: mv88e6xxx: Split mv88e6xxx_reg_read and mv88e6xxx_reg_write Guenter Roeck
2015-03-21 15:46 ` [PATCH 05/18] net: dsa: mv88e6352: Use common port initialization code Guenter Roeck
2015-03-21 15:46 ` [PATCH 06/18] net: dsa: mv88e6123_61_65: Use common port configuration Guenter Roeck
2015-03-21 15:46 ` [PATCH 07/18] net: dsa: mv88e6171: " Guenter Roeck
2015-03-21 15:46 ` [PATCH 08/18] net: dsa: mv88e6xxx: Add Hardware bridging support Guenter Roeck
2015-03-22 20:06 ` Andrew Lunn
2015-03-22 20:45 ` Guenter Roeck
2015-03-22 20:59 ` Andrew Lunn
2015-03-22 22:39 ` Guenter Roeck
2015-03-23 1:18 ` Andrew Lunn
2015-03-23 1:33 ` Guenter Roeck
2015-03-22 22:24 ` David Miller
2015-03-22 22:45 ` Guenter Roeck
2015-03-21 15:46 ` [PATCH 09/18] net: dsa: mv88e6352: Add support for hardware bridging Guenter Roeck
2015-03-21 15:46 ` [PATCH 10/18] net: dsa: Add basic framework to support ndo_fdb functions Guenter Roeck
2015-03-21 15:46 ` [PATCH 11/18] net: dsa: mv88e6xxx: Add support for fdb_add, fdb_del, and fdb_getnext Guenter Roeck
2015-03-21 15:46 ` [PATCH 12/18] net: dsa: mv88e6352: Add support for ndo_fdb functions Guenter Roeck
2015-03-21 15:46 ` [PATCH 13/18] net: dsa: Centralise getting switch id Guenter Roeck
2015-03-21 15:46 ` [PATCH 14/18] net: dsa: mv88e6171: Add defines for switch product IDs Guenter Roeck
2015-03-21 15:46 ` [PATCH 15/18] net: dsa: mv88e6171: Add EEE support to the mv88e6172 Guenter Roeck
2015-03-21 15:46 ` [PATCH 16/18] net: dsa: mv88e6171: Add support for hardware bridging Guenter Roeck
2015-03-21 15:46 ` [RFT PATCH 17/18] net: dsa: mv88e6131: Use common initialization functions Guenter Roeck
2015-03-21 15:46 ` [RFT PATCH 18/18] net: dsa: mv88e6131: Add HW bridging support Guenter Roeck
2015-03-21 22:48 ` [PATCH 0/18] net: dsa: HW bridging, EEE support David Miller
2015-03-21 23:12 ` Guenter Roeck
2015-03-21 23:26 ` Andrew Lunn
2015-03-22 2:14 ` David Miller
2015-03-22 2:31 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426952815-4642-2-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).