netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: <linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Cc: <linux-kernel@vger.kernel.org>,
	Boris BREZILLON <boris.brezillon@free-electrons.com>,
	Cyrille Pitchen <cyrille.pitchen@atmel.com>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	<michal.simek@xilinx.com>, <punnaia@xilinx.com>,
	Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH v2 3/8] net/macb: fix capabilities configuration
Date: Tue, 31 Mar 2015 15:02:01 +0200	[thread overview]
Message-ID: <1427806926-18887-4-git-send-email-nicolas.ferre@atmel.com> (raw)
In-Reply-To: <1427806926-18887-1-git-send-email-nicolas.ferre@atmel.com>

Capabilities configuration by macb_configure_caps() was moved far too late by
421d9df0628b (net/macb: merge at91_ether driver into macb driver) which would
lead to badly configured hardware.
So, move this function to early probe and modify its prototype to re-gain its
original behavior.
DT data retrieval is also moved to simplify the probe code flow.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
---

Changes in v2: None

 drivers/net/ethernet/cadence/macb.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 68d59b3900b1..680e1eebb7ea 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -2132,10 +2132,13 @@ static const struct net_device_ops macb_netdev_ops = {
  * Configure peripheral capacities according to device tree
  * and integration options used
  */
-static void macb_configure_caps(struct macb *bp)
+static void macb_configure_caps(struct macb *bp, const struct macb_config *dt_conf)
 {
 	u32 dcfg;
 
+	if (dt_conf)
+		bp->caps = dt_conf->caps;
+
 	if (MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2)
 		bp->caps |= MACB_CAPS_MACB_IS_GEM;
 
@@ -2313,9 +2316,6 @@ static int macb_init(struct platform_device *pdev)
 
 	macb_or_gem_writel(bp, USRIO, val);
 
-	/* setup capacities */
-	macb_configure_caps(bp);
-
 	/* Set MII management clock divider */
 	val = macb_mdc_clk_div(bp);
 	val |= macb_dbw(bp);
@@ -2720,6 +2720,20 @@ static int macb_probe(struct platform_device *pdev)
 	bp->queue_mask = queue_mask;
 	spin_lock_init(&bp->lock);
 
+	if (np) {
+		const struct of_device_id *match;
+
+		match = of_match_node(macb_dt_ids, np);
+		if (match && match->data) {
+			macb_config = match->data;
+			bp->dma_burst_length = macb_config->dma_burst_length;
+			init = macb_config->init;
+		}
+	}
+
+	/* setup capacities */
+	macb_configure_caps(bp, macb_config);
+
 	platform_set_drvdata(pdev, dev);
 
 	dev->irq = platform_get_irq(pdev, 0);
@@ -2743,20 +2757,6 @@ static int macb_probe(struct platform_device *pdev)
 		bp->phy_interface = err;
 	}
 
-	if (np) {
-		const struct of_device_id *match;
-
-		match = of_match_node(macb_dt_ids, np);
-		if (match)
-			macb_config = match->data;
-	}
-
-	if (macb_config) {
-		bp->caps = macb_config->caps;
-		bp->dma_burst_length = macb_config->dma_burst_length;
-		init = macb_config->init;
-	}
-
 	/* IP specific init */
 	err = init(pdev);
 	if (err)
-- 
2.1.3

  parent reply	other threads:[~2015-03-31 13:02 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-31 13:01 [PATCH v2 0/8] net/macb: fixes after big driver update Nicolas Ferre
2015-03-31 13:01 ` [PATCH v2 1/8] net/macb: only probe queues once and use stored values Nicolas Ferre
2015-03-31 13:02 ` [PATCH v2 2/8] net/macb: add comment in macb_probe_queues Nicolas Ferre
2015-03-31 13:02 ` Nicolas Ferre [this message]
2015-03-31 13:02 ` [PATCH v2 4/8] net/macb: trivial: correct wording for caps Nicolas Ferre
2015-03-31 13:02 ` [PATCH v2 5/8] net/macb: fix probe sequence to setup clocks earlier Nicolas Ferre
2015-03-31 13:02 ` [PATCH v2 6/8] net/macb: add the user i/o to ethtool register dump Nicolas Ferre
2015-03-31 13:02 ` [PATCH v2 7/8] net/macb: fix the peripheral version test Nicolas Ferre
2015-03-31 15:08   ` Punnaiah Choudary Kalluri
2015-03-31 13:02 ` [PATCH v2 8/8] net/macb: unify peripheral version testing Nicolas Ferre
2015-03-31 14:58   ` Punnaiah Choudary Kalluri
2015-03-31 20:52 ` [PATCH v2 0/8] net/macb: fixes after big driver update David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1427806926-18887-4-git-send-email-nicolas.ferre@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=cyrille.pitchen@atmel.com \
    --cc=davem@davemloft.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=netdev@vger.kernel.org \
    --cc=punnaia@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).