From: Amir Vadai <amirv@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Yevgeny Petrilin <yevgenyp@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>,
Or Gerlitz <ogerlitz@mellanox.com>,
Achiad Shochat <achiad@mellanox.com>,
Ido Shamay <idos@mellanox.com>, Tal Alon <talal@mellanox.com>,
Amir Vadai <amirv@mellanox.com>
Subject: [PATCH net-next V1 00/11] net/mlx5: ConnectX-4 100G Ethernet driver
Date: Mon, 13 Apr 2015 14:44:50 +0300 [thread overview]
Message-ID: <1428925501-2373-1-git-send-email-amirv@mellanox.com> (raw)
Hi Dave,
Changes from V0:
- Removed V0 Patch 1/11 ("net/mlx5_core: Virtually extend work/completion queue
buffers by one page") due to misuse of DMA API. Thanks Dave.
- Patch 1/11 ("net/mlx5_core: Set irq affinity hints"):
- Use kcalloc instead of kzalloc
- Fix build error when CONFIG_CPUMASK_OFFSTACK=n. Driver loading will fail
now if cpumask allocation is failing.
- Using dev_to_node helper. Thanks, Ido.
- Patch 3/11 ("net/mlx5_core: HW data structs/types definitions preparation for
mlx5 ehternet driver")
- Removed Mellanox internal comment at the head of the file. Thanks Joe
- Patch 6/11 ("net/mlx5_core: Implement get/set port status")
- Use direct return of function's result. Thanks Sergei.
- Added Patch 8/11 ("net/mlx5_core: Set/Query port MTU commands")
- Patch 9/11 ("net/mlx5: Ethernet Datapath files")
- Use rq->wqe_sz instead of skb_end_offset. Thanks Ido.
- Use dma_wmb() when possible instead of wmb(). Thanks Alex.
- Fix checkpatch issues
- Patch 10/11 ("net/mlx5: ethernet resources handling")
- checkpatch issues
- Added missing include
- Patch 11/11 ("net/mlx5: Ethernet driver")
- checkpatch issues
- fixed typo
- Modified use of affinity hint
- Using dev_to_node helper. Thanks, Ido.
- Use new hardware commands from Patch 8/11 ("net/mlx5_core: Set/Query port
MTU commands") to get/set port MTU in hardware.
- Removed NETIF_F_SG since hardware ring wraparound is not supported
- Use dma_wmb() when possible instead of wmb(). Thanks Alex.
This patchset introduces support in Mellanox ConnectX-4 100G Ethernet NIC.
Unlike the ConnectX-3 driver, this driver is built of a single module (there is
no mlx5_en). It is the Ethernet driver and also the low level driver for the
infiniband driver - mlx5_ib.
Many features are still missing from the driver, but all the basic
functionalities are there already.
Notes:
- Patch 3/11 ("net/mlx5_core: HW data structs/types definitions preparation
for mlx5 ehternet driver") is too big for the mail server. It is hard to split
it, since it is a generated code. I'm sending it as is, so you get it
as part of the patches. I also place it on a public git [1], to enable
reviewing it from the mailing list.
Patchset was applied on top of e60a9de ("Merge branch 'master' of
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue")
[1] - http://git.openfabrics.org/?p=~amirv/linux.git;a=shortlog;h=refs/heads/mlx5e_v1
Thanks to Achiad, Saeed, Yevheny, Or and the whole team for making this happen,
Amir
Amir Vadai (3):
net/mlx5: Ethernet Datapath files
net/mlx5: ethernet resources handling
net/mlx5: Ethernet driver
Rana Shahout (2):
net/mlx5_core: Implement get/set port status
net/mlx5_core: Modify CQ moderation parameters
Saeed Mahameed (6):
net/mlx5_core: Set irq affinity hints
net/mlx5_core: Add EQ renaming mechanism
net/mlx5_core: HW data structs/types definitions preparation for mlx5
ehternet driver
net/mlx5_core/ib: New device capabilities handling.
net/mlx5_core: Implement get and set functions of ptys register fields
net/mlx5_core: Set/Query port MTU commands
drivers/infiniband/hw/mlx5/cq.c | 8 +-
drivers/infiniband/hw/mlx5/mad.c | 2 +-
drivers/infiniband/hw/mlx5/main.c | 113 +-
drivers/infiniband/hw/mlx5/mlx5_ib.h | 6 +-
drivers/infiniband/hw/mlx5/mr.c | 3 +-
drivers/infiniband/hw/mlx5/odp.c | 47 +-
drivers/infiniband/hw/mlx5/qp.c | 84 +-
drivers/infiniband/hw/mlx5/srq.c | 7 +-
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 3 +-
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 17 +-
drivers/net/ethernet/mellanox/mlx5/core/cq.c | 18 +
drivers/net/ethernet/mellanox/mlx5/core/en.h | 520 ++
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 679 ++
.../ethernet/mellanox/mlx5/core/en_flow_table.c | 858 +++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1920 ++++++
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 249 +
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 344 +
drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c | 107 +
drivers/net/ethernet/mellanox/mlx5/core/eq.c | 20 +-
.../net/ethernet/mellanox/mlx5/core/flow_table.c | 422 ++
drivers/net/ethernet/mellanox/mlx5/core/fw.c | 90 +-
drivers/net/ethernet/mellanox/mlx5/core/main.c | 294 +-
drivers/net/ethernet/mellanox/mlx5/core/mcg.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/mlx5_core.h | 20 +-
drivers/net/ethernet/mellanox/mlx5/core/port.c | 165 +
drivers/net/ethernet/mellanox/mlx5/core/transobj.c | 169 +
drivers/net/ethernet/mellanox/mlx5/core/transobj.h | 47 +
drivers/net/ethernet/mellanox/mlx5/core/uar.c | 44 +-
drivers/net/ethernet/mellanox/mlx5/core/vport.c | 111 +
drivers/net/ethernet/mellanox/mlx5/core/vport.h | 41 +
drivers/net/ethernet/mellanox/mlx5/core/wq.c | 189 +
drivers/net/ethernet/mellanox/mlx5/core/wq.h | 171 +
include/linux/mlx5/cq.h | 3 +
include/linux/mlx5/device.h | 179 +-
include/linux/mlx5/driver.h | 99 +-
include/linux/mlx5/flow_table.h | 54 +
include/linux/mlx5/mlx5_ifc.h | 6623 +++++++++++++++++++-
include/linux/mlx5/qp.h | 25 +
38 files changed, 13275 insertions(+), 478 deletions(-)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en.h
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_flow_table.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_main.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/flow_table.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/transobj.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/transobj.h
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/vport.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/vport.h
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/wq.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/wq.h
create mode 100644 include/linux/mlx5/flow_table.h
--
1.9.3
next reply other threads:[~2015-04-13 11:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 11:44 Amir Vadai [this message]
2015-04-13 11:44 ` [PATCH net-next V1 01/11] net/mlx5_core: Set irq affinity hints Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 02/11] net/mlx5_core: Add EQ renaming mechanism Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 03/11] net/mlx5_core: HW data structs/types definitions preparation for mlx5 ehternet driver Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 04/11] net/mlx5_core/ib: New device capabilities handling Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 05/11] net/mlx5_core: Implement get and set functions of ptys register fields Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 06/11] net/mlx5_core: Implement get/set port status Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 07/11] net/mlx5_core: Modify CQ moderation parameters Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 08/11] net/mlx5_core: Set/Query port MTU commands Amir Vadai
2015-04-13 11:44 ` [PATCH net-next V1 09/11] net/mlx5: Ethernet Datapath files Amir Vadai
2015-04-13 11:45 ` [PATCH net-next V1 10/11] net/mlx5: Ethernet resources handling Amir Vadai
2015-04-13 11:45 ` [PATCH net-next V1 11/11] net/mlx5: Ethernet driver Amir Vadai
2015-04-14 2:15 ` [PATCH net-next V1 00/11] net/mlx5: ConnectX-4 100G " David Miller
2015-04-14 7:05 ` Amir Vadai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428925501-2373-1-git-send-email-amirv@mellanox.com \
--to=amirv@mellanox.com \
--cc=achiad@mellanox.com \
--cc=davem@davemloft.net \
--cc=idos@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=saeedm@mellanox.com \
--cc=talal@mellanox.com \
--cc=yevgenyp@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).