From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Mark Rustad <mark.d.rustad@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 11/11] ixgbe: Use a signed type to hold error codes
Date: Sat, 2 May 2015 03:42:38 -0700 [thread overview]
Message-ID: <1430563358-113833-12-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1430563358-113833-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Mark Rustad <mark.d.rustad@intel.com>
Because error codes are negative, it only makes sense to
consistently use signed types when handling them. Also remove
some explicit comparisons with 0 on these variables.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 10 +++++-----
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++--
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 4 ++--
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 ++--
4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index eafa9ec..9f6fb19 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3053,7 +3053,7 @@ static int ixgbe_get_module_info(struct net_device *dev,
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
struct ixgbe_hw *hw = &adapter->hw;
- u32 status;
+ s32 status;
u8 sff8472_rev, addr_mode;
bool page_swap = false;
@@ -3061,14 +3061,14 @@ static int ixgbe_get_module_info(struct net_device *dev,
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_SFF_8472_COMP,
&sff8472_rev);
- if (status != 0)
+ if (status)
return -EIO;
/* addressing mode is not supported */
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_SFF_8472_SWAP,
&addr_mode);
- if (status != 0)
+ if (status)
return -EIO;
if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) {
@@ -3095,7 +3095,7 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
struct ixgbe_hw *hw = &adapter->hw;
- u32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
u8 databyte = 0xFF;
int i = 0;
@@ -3112,7 +3112,7 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
else
status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte);
- if (status != 0)
+ if (status)
return -EIO;
data[i - ee->offset] = databyte;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 36072af..66adbd0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4761,7 +4761,7 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
{
u32 speed;
bool autoneg, link_up = false;
- u32 ret = IXGBE_ERR_LINK_SETUP;
+ int ret = IXGBE_ERR_LINK_SETUP;
if (hw->mac.ops.check_link)
ret = hw->mac.ops.check_link(hw, &speed, &link_up, false);
@@ -8026,7 +8026,7 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev,
return -EINVAL;
nla_for_each_nested(attr, br_spec, rem) {
- u32 status;
+ int status;
__u16 mode;
if (nla_type(attr) != IFLA_BRIDGE_MODE)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 8a2be44..af828f8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -317,14 +317,14 @@ bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
**/
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
{
- u32 status;
+ s32 status;
u16 phy_id_high = 0;
u16 phy_id_low = 0;
status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
&phy_id_high);
- if (status == 0) {
+ if (!status) {
hw->phy.id = (u32)(phy_id_high << 16);
status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
&phy_id_low);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 58ab7d9..b023698 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1063,7 +1063,7 @@ static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
**/
static s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
{
- u32 status;
+ s32 status;
u16 lasi, autoneg_status, speed;
ixgbe_link_speed force_speed;
@@ -1205,7 +1205,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
**/
static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
{
- u32 status;
+ s32 status;
u16 reg;
u32 retries = 2;
--
2.1.0
next prev parent reply other threads:[~2015-05-02 10:42 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-02 10:42 [net-next 00/11][pull request] Intel Wired LAN Driver Updates 2015-05-02 Jeff Kirsher
2015-05-02 10:42 ` [net-next 01/11] igb: simplify and clean up igb_enable_mas() Jeff Kirsher
2015-05-02 10:42 ` [net-next 02/11] e100: don't initialize int object to zero Jeff Kirsher
2015-05-02 10:42 ` [net-next 03/11] e1000e: Cleanup handling of VLAN_HLEN as a part of max frame size Jeff Kirsher
2015-05-02 10:42 ` [net-next 04/11] e1000e: Do not allow CRC stripping to be disabled on 82579 w/ jumbo frames Jeff Kirsher
2015-05-02 10:42 ` [net-next 05/11] e1000e: fix call to do_div() to use u64 arg Jeff Kirsher
2015-05-02 10:42 ` [net-next 06/11] ixgbe, ixgbevf: Add new mbox API to enable MC promiscuous mode Jeff Kirsher
2015-05-02 10:42 ` [net-next 07/11] if_link: Add VF multicast promiscuous control Jeff Kirsher
2015-05-03 14:16 ` Or Gerlitz
2015-05-04 16:12 ` Skidmore, Donald C
2015-05-07 5:55 ` Hiroshi Shimamoto
2015-05-07 16:44 ` Skidmore, Donald C
2015-05-08 0:23 ` Hiroshi Shimamoto
2015-05-11 23:55 ` Hiroshi Shimamoto
2015-05-12 0:21 ` Skidmore, Donald C
2015-05-12 0:33 ` Hiroshi Shimamoto
2015-05-16 11:56 ` Jeff Kirsher
2015-05-19 23:52 ` Hiroshi Shimamoto
2015-05-02 10:42 ` [net-next 08/11] ixgbe: Add new ndo to allow VF multicast promiscuous mode Jeff Kirsher
2015-05-02 10:42 ` [net-next 09/11] ixgbe: Fix IOSF SB access issues Jeff Kirsher
2015-05-02 10:42 ` [net-next 10/11] ixgbe: Release semaphore bits in the right order Jeff Kirsher
2015-05-02 10:42 ` Jeff Kirsher [this message]
2015-05-04 3:36 ` [net-next 00/11][pull request] Intel Wired LAN Driver Updates 2015-05-02 David Miller
2015-05-04 7:34 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430563358-113833-12-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=mark.d.rustad@intel.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox