From: Joachim Eastwood <manabian@gmail.com>
To: arnd@arndb.de, peppe.cavallaro@st.com, dinguyen@opensource.altera.com
Cc: Joachim Eastwood <manabian@gmail.com>,
netdev@vger.kernel.org, davem@davemloft.net,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next 08/11] stmmac: convert dwmac-socfpga to platform driver
Date: Thu, 14 May 2015 12:11:03 +0200 [thread overview]
Message-ID: <1431598266-25736-9-git-send-email-manabian@gmail.com> (raw)
In-Reply-To: <1431598266-25736-1-git-send-email-manabian@gmail.com>
Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++++++++++++
drivers/net/ethernet/stmicro/stmmac/Makefile | 3 ++-
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 21 ++++++++++++++++++++-
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 -
.../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 -
5 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cb984606a819..f103e57e3ac0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -66,6 +66,18 @@ config DWMAC_ROCKCHIP
This selects the Rockchip RK3288 SoC glue layer support for
the stmmac device driver.
+config DWMAC_SOCFPGA
+ tristate "SOCFPGA dwmac support"
+ default ARCH_SOCFPGA
+ depends on OF
+ select MFD_SYSCON
+ help
+ Support for ethernet controller on Altera SOCFPGA
+
+ This selects the Altera SOCFPGA SoC glue layer support
+ for the stmmac device driver. This driver is used for
+ arria5 and cyclone5 FPGA SoCs.
+
endif
config STMMAC_PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index e67dea423324..690741d6fc10 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -9,9 +9,10 @@ obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
+obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o dwmac-sunxi.o \
- dwmac-sti.o dwmac-socfpga.o
+ dwmac-sti.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 5a36bd2c7837..8141c5b844ae 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -257,9 +257,28 @@ static int socfpga_dwmac_init(struct platform_device *pdev, void *priv)
return ret;
}
-const struct stmmac_of_data socfpga_gmac_data = {
+static const struct stmmac_of_data socfpga_gmac_data = {
.setup = socfpga_dwmac_probe,
.init = socfpga_dwmac_init,
.exit = socfpga_dwmac_exit,
.fix_mac_speed = socfpga_dwmac_fix_mac_speed,
};
+
+static const struct of_device_id socfpga_dwmac_match[] = {
+ { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
+ { }
+};
+MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
+
+static struct platform_driver socfpga_dwmac_driver = {
+ .probe = stmmac_pltfr_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "socfpga-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = socfpga_dwmac_match,
+ },
+};
+module_platform_driver(socfpga_dwmac_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 674f7bd1641a..4553b50833ea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -39,7 +39,6 @@ static const struct of_device_id stmmac_dt_ids[] = {
{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
- { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
index fff2a885ffd8..3c8d7088361f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
@@ -26,6 +26,5 @@ extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
extern const struct stmmac_of_data sun7i_gmac_data;
extern const struct stmmac_of_data stih4xx_dwmac_data;
extern const struct stmmac_of_data stid127_dwmac_data;
-extern const struct stmmac_of_data socfpga_gmac_data;
#endif /* __STMMAC_PLATFORM_H__ */
--
1.8.0
next prev parent reply other threads:[~2015-05-14 10:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-14 10:10 [PATCH net-next 00/11] convert stmmac glue layers into platform drivers Joachim Eastwood
2015-05-14 10:10 ` [PATCH net-next 01/11] stmmac: add dwmac glue for NXP 18xx/43xx family Joachim Eastwood
2015-05-14 10:10 ` [PATCH net-next 02/11] doc: dt: add documentation for nxp,lpc1850-dwmac Joachim Eastwood
2015-05-14 10:10 ` [PATCH net-next 03/11] stmmac: prepare stmmac platform to support stand alone drivers Joachim Eastwood
2015-05-14 10:10 ` [PATCH net-next 04/11] stmmac: add a generic dwmac driver Joachim Eastwood
2015-05-14 10:11 ` [PATCH net-next 05/11] stmmac: convert dwmac-lpc18xx to a platform driver Joachim Eastwood
2015-05-14 10:11 ` [PATCH net-next 06/11] stmmac: convert dwmac-meson to " Joachim Eastwood
2015-05-14 10:11 ` [PATCH net-next 07/11] stmmac: convert dwmac-rk " Joachim Eastwood
2015-05-14 10:11 ` Joachim Eastwood [this message]
2015-05-14 10:11 ` [PATCH net-next 09/11] stmmac: convert dwmac-sti " Joachim Eastwood
2015-05-14 10:11 ` [PATCH net-next 10/11] stmmac: convert dwmac-sunxi " Joachim Eastwood
2015-05-14 10:11 ` [PATCH net-next 11/11] stmmac: drop driver from stmmac platform code Joachim Eastwood
2015-05-14 15:24 ` [PATCH net-next 00/11] convert stmmac glue layers into platform drivers Chen-Yu Tsai
[not found] ` <CAGb2v663efjkwgRjPdxV4CQxeesiu7jxkMf9j_oPU_bSHbNNiA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-15 7:45 ` Giuseppe CAVALLARO
[not found] ` <5555A42B.3040205-qxv4g6HH51o@public.gmane.org>
2015-05-15 8:44 ` Arnd Bergmann
2015-05-15 9:11 ` Giuseppe CAVALLARO
2015-05-14 19:53 ` Dinh Nguyen
2015-05-15 16:44 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431598266-25736-9-git-send-email-manabian@gmail.com \
--to=manabian@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=dinguyen@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).