From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: rasesh.mody@qlogic.com, joe@perches.com
Subject: [PATCH net-next v2 10/19] bna: remove RXF_E_PAUSE and RXF_E_RESUME events
Date: Thu, 11 Jun 2015 15:52:22 +0200 [thread overview]
Message-ID: <1434030751-28835-11-git-send-email-ivecera@redhat.com> (raw)
In-Reply-To: <1434030751-28835-1-git-send-email-ivecera@redhat.com>
RXF_E_PAUSE & RXF_E_RESUME events are never sent for bna_rxf object so
they needn't to be handled. The bna_rxf's state bna_rxf_sm_fltr_clr_wait
and function bna_rxf_fltr_clear are unused after this so remove them also.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 75 ----------------------------
drivers/net/ethernet/brocade/bna/bna_types.h | 2 -
2 files changed, 77 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 471e74d..ccf48a1 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -46,7 +46,6 @@ do { \
static int bna_rxf_cfg_apply(struct bna_rxf *rxf);
static void bna_rxf_cfg_reset(struct bna_rxf *rxf);
-static int bna_rxf_fltr_clear(struct bna_rxf *rxf);
static int bna_rxf_ucast_cfg_apply(struct bna_rxf *rxf);
static int bna_rxf_promisc_cfg_apply(struct bna_rxf *rxf);
static int bna_rxf_allmulti_cfg_apply(struct bna_rxf *rxf);
@@ -66,8 +65,6 @@ bfa_fsm_state_decl(bna_rxf, cfg_wait, struct bna_rxf,
enum bna_rxf_event);
bfa_fsm_state_decl(bna_rxf, started, struct bna_rxf,
enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, fltr_clr_wait, struct bna_rxf,
- enum bna_rxf_event);
bfa_fsm_state_decl(bna_rxf, last_resp_wait, struct bna_rxf,
enum bna_rxf_event);
@@ -101,14 +98,6 @@ bna_rxf_sm_stopped(struct bna_rxf *rxf, enum bna_rxf_event event)
call_rxf_cam_fltr_cbfn(rxf);
break;
- case RXF_E_PAUSE:
- rxf->flags |= BNA_RXF_F_PAUSED;
- break;
-
- case RXF_E_RESUME:
- rxf->flags &= ~BNA_RXF_F_PAUSED;
- break;
-
default:
bfa_sm_fault(event);
}
@@ -132,11 +121,6 @@ bna_rxf_sm_paused(struct bna_rxf *rxf, enum bna_rxf_event event)
call_rxf_cam_fltr_cbfn(rxf);
break;
- case RXF_E_RESUME:
- rxf->flags &= ~BNA_RXF_F_PAUSED;
- bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
- break;
-
default:
bfa_sm_fault(event);
}
@@ -170,12 +154,6 @@ bna_rxf_sm_cfg_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
/* No-op */
break;
- case RXF_E_PAUSE:
- rxf->flags |= BNA_RXF_F_PAUSED;
- call_rxf_start_cbfn(rxf);
- bfa_fsm_set_state(rxf, bna_rxf_sm_fltr_clr_wait);
- break;
-
case RXF_E_FW_RESP:
if (!bna_rxf_cfg_apply(rxf)) {
/* No more pending config updates */
@@ -209,40 +187,6 @@ bna_rxf_sm_started(struct bna_rxf *rxf, enum bna_rxf_event event)
bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
break;
- case RXF_E_PAUSE:
- rxf->flags |= BNA_RXF_F_PAUSED;
- if (!bna_rxf_fltr_clear(rxf))
- bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
- else
- bfa_fsm_set_state(rxf, bna_rxf_sm_fltr_clr_wait);
- break;
-
- default:
- bfa_sm_fault(event);
- }
-}
-
-static void
-bna_rxf_sm_fltr_clr_wait_entry(struct bna_rxf *rxf)
-{
-}
-
-static void
-bna_rxf_sm_fltr_clr_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
- switch (event) {
- case RXF_E_FAIL:
- bna_rxf_cfg_reset(rxf);
- bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
- break;
-
- case RXF_E_FW_RESP:
- if (!bna_rxf_fltr_clear(rxf)) {
- /* No more pending CAM entries to clear */
- bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
- }
- break;
-
default:
bfa_sm_fault(event);
}
@@ -652,25 +596,6 @@ bna_rxf_cfg_apply(struct bna_rxf *rxf)
return 0;
}
-/* Only software reset */
-static int
-bna_rxf_fltr_clear(struct bna_rxf *rxf)
-{
- if (bna_rxf_ucast_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- if (bna_rxf_mcast_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- if (bna_rxf_promisc_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- if (bna_rxf_allmulti_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- return 0;
-}
-
static void
bna_rxf_cfg_reset(struct bna_rxf *rxf)
{
diff --git a/drivers/net/ethernet/brocade/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h
index 095bd63..e56f650 100644
--- a/drivers/net/ethernet/brocade/bna/bna_types.h
+++ b/drivers/net/ethernet/brocade/bna/bna_types.h
@@ -191,8 +191,6 @@ enum bna_rxf_event {
RXF_E_STOP = 2,
RXF_E_FAIL = 3,
RXF_E_CONFIG = 4,
- RXF_E_PAUSE = 5,
- RXF_E_RESUME = 6,
RXF_E_FW_RESP = 7,
};
--
2.3.6
next prev parent reply other threads:[~2015-06-11 13:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-11 13:52 [PATCH net-next v2 00/19] bna: clean-up Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 01/19] bna: use ether_addr_copy instead of memcpy Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 02/19] bna: get rid of mac_t Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 03/19] bna: replace pragma(pack) with attribute __packed Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 04/19] bna: get rid of duplicate and unused macros Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 05/19] bna: use BIT(x) instead of (1 << x) Ivan Vecera
2015-06-12 13:30 ` David Laight
2015-06-16 8:43 ` Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 06/19] bna: remove unused cbfn parameter Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 07/19] bna: remove pause_cbfn from struct bna_enet Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 08/19] bna: remove oper_state_cbfn from struct bna_rxf Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 09/19] bna: remove prio_change_cbfn oper_state_cbfn from struct bna_tx Ivan Vecera
2015-06-11 13:52 ` Ivan Vecera [this message]
2015-06-11 13:52 ` [PATCH net-next v2 11/19] bna: remove paused from bna_rx_config and flags from bna_rxf Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 12/19] bna: remove TX_E_PRIO_CHANGE event and BNA_TX_F_PRIO_CHANGED flag Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 13/19] bna: correct comparisons/assignments to bool Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 14/19] bna: use memdup_user to copy userspace buffers Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 15/19] bna: remove useless pointer assignment Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 16/19] bna: get rid of private macros for manipulation with lists Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 17/19] bna: use list_for_each_entry where appropriate Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 18/19] bna: fix timeout API argument type Ivan Vecera
2015-06-11 13:52 ` [PATCH net-next v2 19/19] bna: use netdev_* and dev_* instead of printk and pr_* Ivan Vecera
2015-06-11 22:57 ` [PATCH net-next v2 00/19] bna: clean-up David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434030751-28835-11-git-send-email-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=joe@perches.com \
--cc=netdev@vger.kernel.org \
--cc=rasesh.mody@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).