From: sfeldma@gmail.com
To: netdev@vger.kernel.org
Cc: jiri@resnulli.us, simon.horman@netronome.com,
roopa@cumulusnetworks.com, ronen.arad@intel.com,
john.r.fastabend@intel.com, andrew@lunn.ch, f.fainelli@gmail.com,
linux@roeck-us.net, davidch@broadcom.com,
stephen@networkplumber.org
Subject: [RFC PATCH net-next v2 1/5] net: don't reforward packets already forwarded by offload device
Date: Wed, 17 Jun 2015 14:53:10 -0700 [thread overview]
Message-ID: <1434577994-22409-2-git-send-email-sfeldma@gmail.com> (raw)
In-Reply-To: <1434577994-22409-1-git-send-email-sfeldma@gmail.com>
From: Scott Feldman <sfeldma@gmail.com>
Just before queuing skb for xmit on port, check if skb has been marked by
switchdev port driver as already fordwarded by device. If so, drop skb. A
non-zero skb->offload_fwd_mark field is set by the switchdev port
driver/device on ingress to indicate the skb has already been forwarded by
the device to egress ports with matching dev->skb_mark. The switchdev port
driver would assign a non-zero dev->skb_mark for each device port netdev
during registration, for example.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
---
include/linux/netdevice.h | 6 ++++++
include/linux/skbuff.h | 4 ++++
net/core/dev.c | 10 ++++++++++
3 files changed, 20 insertions(+)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index e20979d..7be616e1 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1448,6 +1448,8 @@ enum netdev_priv_flags {
*
* @xps_maps: XXX: need comments on this one
*
+ * @offload_fwd_mark: Offload device fwding mark
+ *
* @trans_start: Time (in jiffies) of last Tx
* @watchdog_timeo: Represents the timeout that is used by
* the watchdog ( see dev_watchdog() )
@@ -1685,6 +1687,10 @@ struct net_device {
struct xps_dev_maps __rcu *xps_maps;
#endif
+#ifdef CONFIG_NET_SWITCHDEV
+ u32 offload_fwd_mark;
+#endif
+
/* These may be needed for future network-power-down code. */
/*
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d6cdd6e..1533c4f 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -506,6 +506,7 @@ static inline u32 skb_mstamp_us_delta(const struct skb_mstamp *t1,
* @no_fcs: Request NIC to treat last 4 bytes as Ethernet FCS
* @napi_id: id of the NAPI struct this skb came from
* @secmark: security marking
+ * @offload_fwd_mark: fwding offload mark
* @mark: Generic packet mark
* @vlan_proto: vlan encapsulation protocol
* @vlan_tci: vlan tag control information
@@ -653,6 +654,9 @@ struct sk_buff {
#ifdef CONFIG_NETWORK_SECMARK
__u32 secmark;
#endif
+#ifdef CONFIG_NET_SWITCHDEV
+ __u32 offload_fwd_mark;
+#endif
union {
__u32 mark;
__u32 reserved_tailroom;
diff --git a/net/core/dev.c b/net/core/dev.c
index 6778a99..9eb517e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3065,6 +3065,16 @@ static int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
else
skb_dst_force(skb);
+#ifdef CONFIG_NET_SWITCHDEV
+ /* Don't forward if offload device already forwarded */
+ if (skb->offload_fwd_mark &&
+ skb->offload_fwd_mark == dev->offload_fwd_mark) {
+ consume_skb(skb);
+ rc = NET_XMIT_SUCCESS;
+ goto out;
+ }
+#endif
+
txq = netdev_pick_tx(dev, skb, accel_priv);
q = rcu_dereference_bh(txq->qdisc);
--
1.7.10.4
next prev parent reply other threads:[~2015-06-17 21:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 21:53 [RFC PATCH net-next v2 0/5] switchdev: avoid duplicate packet forwarding sfeldma
2015-06-17 21:53 ` sfeldma [this message]
2015-06-17 21:53 ` [RFC PATCH net-next v2 2/5] net: add phys ID compare helper to test if two IDs are the same sfeldma
2015-06-18 14:11 ` Sergei Shtylyov
2015-06-17 21:53 ` [RFC PATCH net-next v2 3/5] switchdev: add offload_fwd_mark generator helper sfeldma
2015-06-17 21:53 ` [RFC PATCH net-next v2 4/5] rocker: add offload_fwd_mark support sfeldma
2015-06-17 21:53 ` [RFC PATCH net-next v2 5/5] switchdev: update documentation for offload_fwd_mark sfeldma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434577994-22409-2-git-send-email-sfeldma@gmail.com \
--to=sfeldma@gmail.com \
--cc=andrew@lunn.ch \
--cc=davidch@broadcom.com \
--cc=f.fainelli@gmail.com \
--cc=jiri@resnulli.us \
--cc=john.r.fastabend@intel.com \
--cc=linux@roeck-us.net \
--cc=netdev@vger.kernel.org \
--cc=ronen.arad@intel.com \
--cc=roopa@cumulusnetworks.com \
--cc=simon.horman@netronome.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).