netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: Nimrod Andy <B38611@freescale.com>,
	Duan Andy <fugang.duan@freescale.com>,
	Cory Tusar <cory.tusar@pid1solutions.com>,
	netdev <netdev@vger.kernel.org>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCHv2 net-next] net: fec: Ensure clocks are enabled while using mdio bus
Date: Sat, 20 Jun 2015 18:15:14 +0200	[thread overview]
Message-ID: <1434816914-9816-1-git-send-email-andrew@lunn.ch> (raw)

When a switch is attached to the mdio bus, the mdio bus can be used
while the interface is not open. If the IPG clock are not enabled,
MDIO reads/writes will simply time out. So enable the clock before
starting a transaction, and disable it afterwards. The CCF performs
reference counting so the clock will only be disabled if there are no
other users.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v2:
  Only enable/disable the IPG clock.

drivers/net/ethernet/freescale/fec_main.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index bf4cf3fbb5f2..2b8a043a573c 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -65,6 +65,7 @@
 
 static void set_multicast_list(struct net_device *ndev);
 static void fec_enet_itr_coal_init(struct net_device *ndev);
+static int fec_enet_clk_enable(struct net_device *ndev, bool enable);
 
 #define DRIVER_NAME	"fec"
 
@@ -1764,6 +1765,11 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 {
 	struct fec_enet_private *fep = bus->priv;
 	unsigned long time_left;
+	int ret;
+
+	ret = clk_prepare_enable(fep->clk_ipg);
+	if (ret)
+		return 0xffff;
 
 	fep->mii_timeout = 0;
 	init_completion(&fep->mdio_done);
@@ -1779,11 +1785,14 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 	if (time_left == 0) {
 		fep->mii_timeout = 1;
 		netdev_err(fep->netdev, "MDIO read timeout\n");
+		clk_disable_unprepare(fep->clk_ipg);
 		return -ETIMEDOUT;
 	}
 
-	/* return value */
-	return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
+	ret = FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
+	clk_disable_unprepare(fep->clk_ipg);
+
+	return ret;
 }
 
 static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
@@ -1791,10 +1800,15 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 {
 	struct fec_enet_private *fep = bus->priv;
 	unsigned long time_left;
+	int ret;
 
 	fep->mii_timeout = 0;
 	init_completion(&fep->mdio_done);
 
+	ret = clk_prepare_enable(fep->clk_ipg);
+	if (ret)
+		return ret;
+
 	/* start a write op */
 	writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
 		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
@@ -1807,9 +1821,12 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	if (time_left == 0) {
 		fep->mii_timeout = 1;
 		netdev_err(fep->netdev, "MDIO write timeout\n");
+		clk_disable_unprepare(fep->clk_ipg);
 		return -ETIMEDOUT;
 	}
 
+	clk_disable_unprepare(fep->clk_ipg);
+
 	return 0;
 }
 
-- 
2.1.4

             reply	other threads:[~2015-06-20 16:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-20 16:15 Andrew Lunn [this message]
2015-06-20 17:47 ` [PATCHv2 net-next] net: fec: Ensure clocks are enabled while using mdio bus Fabio Estevam
2015-06-20 17:58   ` Andrew Lunn
2015-06-21  1:01 ` Florian Fainelli
2015-06-21 20:15   ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434816914-9816-1-git-send-email-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=B38611@freescale.com \
    --cc=cory.tusar@pid1solutions.com \
    --cc=davem@davemloft.net \
    --cc=fugang.duan@freescale.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).