From: Erik Kline <ek@google.com>
To: hannes@stressinduktion.org
Cc: lorenzo@google.com, netdev@vger.kernel.org, davem@davemloft.net,
hideaki.yoshifuji@miraclelinux.com, Erik Kline <ek@google.com>
Subject: [PATCH net-next] ipv6: sysctl to restrict candidate source addresses
Date: Fri, 3 Jul 2015 13:49:01 +0900 [thread overview]
Message-ID: <1435898941-9259-1-git-send-email-ek@google.com> (raw)
Per RFC 6724, section 4, "Candidate Source Addresses":
It is RECOMMENDED that the candidate source addresses be the set
of unicast addresses assigned to the interface that will be used
to send to the destination (the "outgoing" interface).
Add a sysctl to enable this behaviour.
Signed-off-by: Erik Kline <ek@google.com>
---
Documentation/networking/ip-sysctl.txt | 12 ++++++++++++
include/linux/ipv6.h | 1 +
include/uapi/linux/ipv6.h | 1 +
net/ipv6/addrconf.c | 30 +++++++++++++++++++++++++-----
4 files changed, 39 insertions(+), 5 deletions(-)
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 5fae770..d8f3e60 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1435,6 +1435,18 @@ mtu - INTEGER
Default Maximum Transfer Unit
Default: 1280 (IPv6 required minimum)
+restrict_srcaddr - INTEGER
+ Restrict candidate source addresses (vis. RFC 6724, section 4).
+
+ When set to 1, the candidate source addresses for destinations
+ routed via this interface are restricted to the set of addresses
+ configured on this interface.
+
+ Possible values are:
+ 0 : no source address restrictions
+ 1 : require matching outgoing interface
+ Default: 0
+
router_probe_interval - INTEGER
Minimum interval (in seconds) between Router Probing described
in RFC4191.
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 82806c6..6867d1f 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -57,6 +57,7 @@ struct ipv6_devconf {
bool initialized;
struct in6_addr secret;
} stable_secret;
+ __s32 restrict_srcaddr;
void *sysctl;
};
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
index 5efa54a..b174758 100644
--- a/include/uapi/linux/ipv6.h
+++ b/include/uapi/linux/ipv6.h
@@ -171,6 +171,7 @@ enum {
DEVCONF_USE_OPTIMISTIC,
DEVCONF_ACCEPT_RA_MTU,
DEVCONF_STABLE_SECRET,
+ DEVCONF_RESTRICT_SRCADDR,
DEVCONF_MAX
};
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 21c2c81..f72c974 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -211,7 +211,8 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
.accept_ra_mtu = 1,
.stable_secret = {
.initialized = false,
- }
+ },
+ .restrict_srcaddr = 0,
};
static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
@@ -253,6 +254,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
.stable_secret = {
.initialized = false,
},
+ .restrict_srcaddr = 0,
};
/* Check if a valid qdisc is available */
@@ -1366,7 +1368,8 @@ int ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev,
*score = &scores[0], *hiscore = &scores[1];
struct ipv6_saddr_dst dst;
struct net_device *dev;
- int dst_type;
+ struct inet6_dev *idev;
+ int dst_type, restrict_srcaddr = 0;
dst_type = __ipv6_addr_type(daddr);
dst.addr = daddr;
@@ -1380,9 +1383,12 @@ int ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev,
rcu_read_lock();
- for_each_netdev_rcu(net, dev) {
- struct inet6_dev *idev;
+ if (dst_dev) {
+ idev = __in6_dev_get(dst_dev);
+ restrict_srcaddr = (idev) ? idev->cnf.restrict_srcaddr : 0;
+ }
+ for_each_netdev_rcu(net, dev) {
/* Candidate Source Address (section 4)
* - multicast and link-local destination address,
* the set of candidate source address MUST only
@@ -1394,9 +1400,14 @@ int ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev,
* include addresses assigned to interfaces
* belonging to the same site as the outgoing
* interface.)
+ * - "It is RECOMMENDED that the candidate source addresses
+ * be the set of unicast addresses assigned to the
+ * interface that will be used to send to the destination
+ * (the 'outgoing' interface)." (RFC 6724)
*/
if (((dst_type & IPV6_ADDR_MULTICAST) ||
- dst.scope <= IPV6_ADDR_SCOPE_LINKLOCAL) &&
+ dst.scope <= IPV6_ADDR_SCOPE_LINKLOCAL ||
+ restrict_srcaddr) &&
dst.ifindex && dev->ifindex != dst.ifindex)
continue;
@@ -4586,6 +4597,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
array[DEVCONF_ACCEPT_RA_FROM_LOCAL] = cnf->accept_ra_from_local;
array[DEVCONF_ACCEPT_RA_MTU] = cnf->accept_ra_mtu;
/* we omit DEVCONF_STABLE_SECRET for now */
+ array[DEVCONF_RESTRICT_SRCADDR] = cnf->restrict_srcaddr;
}
static inline size_t inet6_ifla6_size(void)
@@ -5585,6 +5597,14 @@ static struct addrconf_sysctl_table
.proc_handler = addrconf_sysctl_stable_secret,
},
{
+ .procname = "restrict_srcaddr",
+ .data = &ipv6_devconf.restrict_srcaddr,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+
+ },
+ {
/* sentinel */
}
},
--
2.4.3.573.g4eafbef
next reply other threads:[~2015-07-03 4:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-03 4:49 Erik Kline [this message]
2015-07-03 7:03 ` [PATCH net-next] ipv6: sysctl to restrict candidate source addresses YOSHIFUJI Hideaki
2015-07-06 3:06 ` Erik Kline
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435898941-9259-1-git-send-email-ek@google.com \
--to=ek@google.com \
--cc=davem@davemloft.net \
--cc=hannes@stressinduktion.org \
--cc=hideaki.yoshifuji@miraclelinux.com \
--cc=lorenzo@google.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).