netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Ahern <dsa@cumulusnetworks.com>
To: netdev@vger.kernel.org
Cc: shm@cumulusnetworks.com, roopa@cumulusnetworks.com,
	gospo@cumulusnetworks.com, jtoppins@cumulusnetworks.com,
	nikolay@cumulusnetworks.com, ddutt@cumulusnetworks.com,
	hannes@stressinduktion.org, nicolas.dichtel@6wind.com,
	stephen@networkplumber.org, hadi@mojatatu.com,
	ebiederm@xmission.com, davem@davemloft.net,
	David Ahern <dsa@cumulusnetworks.com>
Subject: [RFC net-next 2/6] net: Preparation for vrf device
Date: Mon,  6 Jul 2015 09:03:16 -0600	[thread overview]
Message-ID: <1436195001-4818-3-git-send-email-dsa@cumulusnetworks.com> (raw)
In-Reply-To: <1436195001-4818-1-git-send-email-dsa@cumulusnetworks.com>

Add a VRF_MASTER flag for interfaces and helper functions for determining
if a device is a VRF_MASTER.

Also, add link attribute for passing VRF_TABLE id.

Both are used in the following patch that adds a VRF device driver.

Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
---
 include/linux/netdevice.h    | 21 +++++++++++++++++++++
 include/uapi/linux/if_link.h |  9 +++++++++
 2 files changed, 30 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index e20979dfd6a9..142cb64f139c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1274,6 +1274,7 @@ enum netdev_priv_flags {
 	IFF_XMIT_DST_RELEASE_PERM	= 1<<22,
 	IFF_IPVLAN_MASTER		= 1<<23,
 	IFF_IPVLAN_SLAVE		= 1<<24,
+	IFF_VRF_MASTER		        = 1<<25,
 };
 
 #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
@@ -1301,6 +1302,7 @@ enum netdev_priv_flags {
 #define IFF_XMIT_DST_RELEASE_PERM	IFF_XMIT_DST_RELEASE_PERM
 #define IFF_IPVLAN_MASTER		IFF_IPVLAN_MASTER
 #define IFF_IPVLAN_SLAVE		IFF_IPVLAN_SLAVE
+#define IFF_VRF_MASTER		        IFF_VRF_MASTER
 
 /**
  *	struct net_device - The DEVICE structure.
@@ -1417,6 +1419,7 @@ enum netdev_priv_flags {
  *	@dn_ptr:	DECnet specific data
  *	@ip6_ptr:	IPv6 specific data
  *	@ax25_ptr:	AX.25 specific data
+ *	@vrf_ptr:	VRF specific data
  *	@ieee80211_ptr:	IEEE 802.11 specific data, assign before registering
  *
  *	@last_rx:	Time of last Rx
@@ -1629,6 +1632,7 @@ struct net_device {
 	struct dn_dev __rcu     *dn_ptr;
 	struct inet6_dev __rcu	*ip6_ptr;
 	void			*ax25_ptr;
+	struct net_vrf_dev      *vrf_ptr;
 	struct wireless_dev	*ieee80211_ptr;
 	struct wpan_dev		*ieee802154_ptr;
 #if IS_ENABLED(CONFIG_MPLS_ROUTING)
@@ -3781,6 +3785,23 @@ static inline bool netif_supports_nofcs(struct net_device *dev)
 	return dev->priv_flags & IFF_SUPP_NOFCS;
 }
 
+static inline bool netif_is_vrf(struct net_device *dev)
+{
+	return dev->priv_flags & IFF_VRF_MASTER;
+}
+
+static inline bool netif_idx_is_vrf(struct net *net, int idx)
+{
+	struct net_device *dev = dev_get_by_index(net, idx);
+	bool rc = false;
+
+	if (dev) {
+		rc = netif_is_vrf(dev);
+		dev_put(dev);
+	}
+	return rc;
+}
+
 /* This device needs to keep skb dst for qdisc enqueue or ndo_start_xmit() */
 static inline void netif_keep_dst(struct net_device *dev)
 {
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 2c7e8e3d3981..bfbb4d8eeec2 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -339,6 +339,15 @@ enum macvlan_macaddr_mode {
 
 #define MACVLAN_FLAG_NOPROMISC	1
 
+/* VRF section */
+enum {
+	IFLA_VRF_UNSPEC,
+	IFLA_VRF_TABLE,
+	__IFLA_VRF_MAX
+};
+
+#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1)
+
 /* IPVLAN section */
 enum {
 	IFLA_IPVLAN_UNSPEC,
-- 
2.3.2 (Apple Git-55)

  parent reply	other threads:[~2015-07-06 15:03 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-06 15:03 [RFC net-next 0/6] Proposal for VRF-lite - v2 David Ahern
2015-07-06 15:03 ` [RFC net-next 1/6] fib: export symbols David Ahern
2015-07-06 15:03 ` David Ahern [this message]
2015-07-08  8:37   ` [RFC net-next 2/6] net: Preparation for vrf device Nicolas Dichtel
2015-07-08  8:40     ` Nicolas Dichtel
2015-07-08 16:10     ` David Ahern
2015-07-06 15:03 ` [RFC net-next 3/6] net: Introduce VRF device driver - v2 David Ahern
2015-07-06 15:42   ` Nicolas Dichtel
2015-07-06 16:37   ` Nikolay Aleksandrov
2015-07-06 16:46     ` David Ahern
2015-07-08  9:27   ` Nicolas Dichtel
2015-07-08 16:38     ` David Ahern
2015-07-08 18:34   ` Sowmini Varadhan
2015-07-09 17:19     ` David Ahern
2015-07-09 17:28       ` Sowmini Varadhan
2015-07-10  1:36         ` Eric W. Biederman
2015-07-10  2:12           ` David Ahern
2015-07-10  3:55             ` Eric W. Biederman
2015-07-10  4:20               ` David Ahern
2015-07-10  4:56                 ` Eric W. Biederman
2015-07-10 18:42                   ` David Ahern
2015-07-10  2:39         ` David Ahern
2015-07-10  3:28           ` Sowmini Varadhan
2015-07-10  3:44             ` David Ahern
2015-07-06 15:03 ` [RFC net-next 4/6] net: Modifications to ipv4 stack for VRF devices David Ahern
2015-07-06 15:03 ` [RFC net-next 5/6] net: Add sk_bind_dev_if to task_struct David Ahern
2015-07-06 15:03 ` [RFC net-next 6/6] net: Add chvrf command David Ahern
2015-07-06 15:03 ` [RFC PATCH] iproute2: Add support for VRF device David Ahern
2015-07-06 15:40 ` [RFC net-next 0/6] Proposal for VRF-lite - v2 Nicolas Dichtel
2015-07-06 17:53   ` Shrijeet Mukherjee
2015-07-08  9:30     ` Nicolas Dichtel
2015-07-10  5:14 ` Scott Feldman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436195001-4818-3-git-send-email-dsa@cumulusnetworks.com \
    --to=dsa@cumulusnetworks.com \
    --cc=davem@davemloft.net \
    --cc=ddutt@cumulusnetworks.com \
    --cc=ebiederm@xmission.com \
    --cc=gospo@cumulusnetworks.com \
    --cc=hadi@mojatatu.com \
    --cc=hannes@stressinduktion.org \
    --cc=jtoppins@cumulusnetworks.com \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.dichtel@6wind.com \
    --cc=nikolay@cumulusnetworks.com \
    --cc=roopa@cumulusnetworks.com \
    --cc=shm@cumulusnetworks.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).