From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
To: netdev@vger.kernel.org
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>,
bridge@lists.linux-foundation.org, davem@davemloft.net
Subject: [PATCH net-next] bridge: mdb: add vlan support for user entries
Date: Fri, 10 Jul 2015 08:02:08 -0700 [thread overview]
Message-ID: <1436540528-42334-1-git-send-email-nikolay@cumulusnetworks.com> (raw)
Until now all user mdb entries were added in vlan 0, this patch adds
support to allow the user to specify the vlan for the entry.
About the uapi change a hole in struct br_mdb_entry is used so the size
and offsets are kept the same (verified with pahole and tested with older
iproute2).
Example:
$ bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent vlan 2000
dev br0 port eth1 grp 239.0.0.1 permanent vlan 200
dev br0 port eth1 grp 239.0.0.1 permanent
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
---
note: an iproute2 patch will follow if this one is accepted
include/uapi/linux/if_bridge.h | 1 +
net/bridge/br_mdb.c | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index eaaea6208b42..3635b7797508 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -182,6 +182,7 @@ struct br_mdb_entry {
#define MDB_TEMPORARY 0
#define MDB_PERMANENT 1
__u8 state;
+ __u16 vid;
struct {
union {
__be32 ip4;
diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c
index 1fb7d076f15c..a8d0e93d43f2 100644
--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -85,6 +85,7 @@ static int br_mdb_fill_info(struct sk_buff *skb, struct netlink_callback *cb,
memset(&e, 0, sizeof(e));
e.ifindex = port->dev->ifindex;
e.state = p->state;
+ e.vid = p->addr.vid;
if (p->addr.proto == htons(ETH_P_IP))
e.addr.u.ip4 = p->addr.u.ip4;
#if IS_ENABLED(CONFIG_IPV6)
@@ -242,6 +243,7 @@ void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
entry.addr.u.ip6 = group->u.ip6;
#endif
entry.state = state;
+ entry.vid = group->vid;
__br_mdb_notify(dev, &entry, type);
}
@@ -264,6 +266,8 @@ static bool is_valid_mdb_entry(struct br_mdb_entry *entry)
return false;
if (entry->state != MDB_PERMANENT && entry->state != MDB_TEMPORARY)
return false;
+ if (entry->vid >= VLAN_VID_MASK)
+ return false;
return true;
}
@@ -372,6 +376,7 @@ static int __br_mdb_add(struct net *net, struct net_bridge *br,
if (!p || p->br != br || p->state == BR_STATE_DISABLED)
return -EINVAL;
+ ip.vid = entry->vid;
ip.proto = entry->addr.proto;
if (ip.proto == htons(ETH_P_IP))
ip.u.ip4 = entry->addr.u.ip4;
@@ -418,6 +423,7 @@ static int __br_mdb_del(struct net_bridge *br, struct br_mdb_entry *entry)
if (!netif_running(br->dev) || br->multicast_disabled)
return -EINVAL;
+ ip.vid = entry->vid;
ip.proto = entry->addr.proto;
if (ip.proto == htons(ETH_P_IP)) {
if (timer_pending(&br->ip4_other_query.timer))
--
1.9.1
next reply other threads:[~2015-07-10 15:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-10 15:02 Nikolay Aleksandrov [this message]
2015-07-13 21:41 ` [PATCH net-next] bridge: mdb: add vlan support for user entries David Miller
2015-07-20 22:28 ` Stephen Hemminger
2015-07-20 22:53 ` Nikolay Aleksandrov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436540528-42334-1-git-send-email-nikolay@cumulusnetworks.com \
--to=nikolay@cumulusnetworks.com \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox