netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, linux-can@vger.kernel.org,
	kernel@pengutronix.de,
	"J.D. Schroeder" <jay.schroeder@garmin.com>,
	Roger Quadros <rogerq@ti.com>,
	linux-stable <stable@vger.kernel.org>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 6/8] can: c_can: Fix default pinmux glitch at init
Date: Sun, 12 Jul 2015 21:18:09 +0200	[thread overview]
Message-ID: <1436728691-1145-7-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1436728691-1145-1-git-send-email-mkl@pengutronix.de>

From: "J.D. Schroeder" <jay.schroeder@garmin.com>

The previous change 3973c526ae9c (net: can: c_can: Disable pins when CAN
interface is down) causes a slight glitch on the pinctrl settings when used.
Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
the device core will automatically set the default pins. This causes the pins
to be momentarily set to the default and then to the sleep state in
register_c_can_dev(). By adding an optional "enable" state, boards can set the
default pin state to be disabled and avoid the glitch when the switch from
default to sleep first occurs. If the "enable" state is not available
c_can_pinctrl_select_state() falls back to using the "default" pinctrl state.

[Roger Q] - Forward port to v4.2 and use pinctrl_get_select().

Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 041525d2595c..5d214d135332 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -592,6 +592,7 @@ static int c_can_start(struct net_device *dev)
 {
 	struct c_can_priv *priv = netdev_priv(dev);
 	int err;
+	struct pinctrl *p;
 
 	/* basic c_can configuration */
 	err = c_can_chip_config(dev);
@@ -604,8 +605,13 @@ static int c_can_start(struct net_device *dev)
 
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
-	/* activate pins */
-	pinctrl_pm_select_default_state(dev->dev.parent);
+	/* Attempt to use "active" if available else use "default" */
+	p = pinctrl_get_select(priv->device, "active");
+	if (!IS_ERR(p))
+		pinctrl_put(p);
+	else
+		pinctrl_pm_select_default_state(priv->device);
+
 	return 0;
 }
 
-- 
2.1.4


  parent reply	other threads:[~2015-07-12 19:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-12 19:18 pull-request: can 2015-07-12 Marc Kleine-Budde
2015-07-12 19:18 ` [PATCH 1/8] can: rcar_can: fix IRQ check Marc Kleine-Budde
2015-07-12 19:18 ` [PATCH 2/8] can: rcar_can: print signed IRQ # Marc Kleine-Budde
2015-07-12 19:18 ` [PATCH 3/8] can: rcar_can: fix typo in error message Marc Kleine-Budde
2015-07-12 19:18 ` [PATCH 4/8] can: rcar_can: print request_irq() error code Marc Kleine-Budde
2015-07-12 19:18 ` [PATCH 5/8] can: rcar_can: unify error messages Marc Kleine-Budde
2015-07-12 19:18 ` Marc Kleine-Budde [this message]
2015-07-12 19:18 ` [PATCH 7/8] ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmux Marc Kleine-Budde
2015-07-12 19:18 ` [PATCH 8/8] can: replace timestamp as unique skb attribute Marc Kleine-Budde
2015-07-27 18:34   ` Oliver Hartkopp
2015-08-04 19:18     ` Greg KH
2015-07-13  5:24 ` pull-request: can 2015-07-12 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436728691-1145-7-git-send-email-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=jay.schroeder@garmin.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rogerq@ti.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).