From: Denys Vlasenko <dvlasenk@redhat.com>
To: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>,
Johannes Berg <johannes.berg@intel.com>,
"John W. Linville" <linville@tuxdriver.com>,
Intel Linux Wireless <ilw@linux.intel.com>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] iwlwifi: Deinline iwl_{read,write}{8,32}
Date: Tue, 14 Jul 2015 14:22:38 +0200 [thread overview]
Message-ID: <1436876558-6674-1-git-send-email-dvlasenk@redhat.com> (raw)
With CONFIG_IWLWIFI_DEVICE_TRACING=y, these functions are rather large,
too big for inlining.
With this .config: http://busybox.net/~vda/kernel_config,
after uninlining these functions have sizes and callsite counts
as follows:
iwl_read32 475 bytes, 51 callsites
iwl_write32 477 bytes, 90 callsites
iwl_write8 493 bytes, 3 callsites
Reduction in size is about 74,000 bytes:
text data bss dec hex filename
90758147 17226024 36659200 144643371 89f152b vmlinux0
90687995 17221928 36659200 144569123 89df323 vmlinux.after
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Intel Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
---
drivers/net/wireless/iwlwifi/iwl-io.c | 7 +++++++
drivers/net/wireless/iwlwifi/iwl-io.h | 39 +++++++++++++++++++++--------------
2 files changed, 30 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c
index 27c66e4..aed121e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.c
+++ b/drivers/net/wireless/iwlwifi/iwl-io.c
@@ -38,6 +38,13 @@
#define IWL_POLL_INTERVAL 10 /* microseconds */
+#if defined(CONFIG_IWLWIFI_DEVICE_TRACING)
+IWL_READ_WRITE( /*not inlined*/ )
+IWL_EXPORT_SYMBOL(iwl_write8);
+IWL_EXPORT_SYMBOL(iwl_write32);
+IWL_EXPORT_SYMBOL(iwl_read32);
+#endif
+
int iwl_poll_bit(struct iwl_trans *trans, u32 addr,
u32 bits, u32 mask, int timeout)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 705d12c..3c9d2a8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -32,24 +32,31 @@
#include "iwl-devtrace.h"
#include "iwl-trans.h"
-static inline void iwl_write8(struct iwl_trans *trans, u32 ofs, u8 val)
-{
- trace_iwlwifi_dev_iowrite8(trans->dev, ofs, val);
- iwl_trans_write8(trans, ofs, val);
-}
-
-static inline void iwl_write32(struct iwl_trans *trans, u32 ofs, u32 val)
-{
- trace_iwlwifi_dev_iowrite32(trans->dev, ofs, val);
- iwl_trans_write32(trans, ofs, val);
+#define IWL_READ_WRITE(static_inline) \
+static_inline void iwl_write8(struct iwl_trans *trans, u32 ofs, u8 val) \
+{ \
+ trace_iwlwifi_dev_iowrite8(trans->dev, ofs, val); \
+ iwl_trans_write8(trans, ofs, val); \
+} \
+static_inline void iwl_write32(struct iwl_trans *trans, u32 ofs, u32 val) \
+{ \
+ trace_iwlwifi_dev_iowrite32(trans->dev, ofs, val); \
+ iwl_trans_write32(trans, ofs, val); \
+} \
+static_inline u32 iwl_read32(struct iwl_trans *trans, u32 ofs) \
+{ \
+ u32 val = iwl_trans_read32(trans, ofs); \
+ trace_iwlwifi_dev_ioread32(trans->dev, ofs, val); \
+ return val; \
}
-static inline u32 iwl_read32(struct iwl_trans *trans, u32 ofs)
-{
- u32 val = iwl_trans_read32(trans, ofs);
- trace_iwlwifi_dev_ioread32(trans->dev, ofs, val);
- return val;
-}
+#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING)
+IWL_READ_WRITE(static inline)
+#else
+void iwl_write8(struct iwl_trans *trans, u32 ofs, u8 val);
+void iwl_write32(struct iwl_trans *trans, u32 ofs, u32 val);
+u32 iwl_read32(struct iwl_trans *trans, u32 ofs);
+#endif
static inline void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask)
{
--
1.8.1.4
next reply other threads:[~2015-07-14 12:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-14 12:22 Denys Vlasenko [this message]
2015-07-14 12:38 ` [PATCH] iwlwifi: Deinline iwl_{read,write}{8,32} Sergei Shtylyov
2015-07-14 12:41 ` Denys Vlasenko
2015-07-15 17:49 ` Emmanuel Grumbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436876558-6674-1-git-send-email-dvlasenk@redhat.com \
--to=dvlasenk@redhat.com \
--cc=emmanuel.grumbach@intel.com \
--cc=ilw@linux.intel.com \
--cc=johannes.berg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox