From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com,
Catherine Sullivan <catherine.sullivan@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next v2 07/16] i40e: Remove incorrect #ifdef's
Date: Tue, 14 Jul 2015 18:30:31 -0700 [thread overview]
Message-ID: <1436923840-24455-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1436923840-24455-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
This patch removes some #ifdef's that should not be there. They
were stopping code that is needed from being compiled in.
With these #ifdef's removed, changes are needed in the driver
to fix some compile errors: adding missing parameters to
the definition of ndo_bridge_setlink and a ndo_dflt_brige_getlink call.
Change-ID: I5516614e1bc50b6bca0647cef971bc96161ba2de
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index ed6fc52..c7f2a0a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7993,7 +7993,6 @@ static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
return err;
}
-#ifdef HAVE_BRIDGE_ATTRIBS
/**
* i40e_ndo_bridge_setlink - Set the hardware bridge mode
* @dev: the netdev being configured
@@ -8007,7 +8006,8 @@ static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
* bridge mode enabled.
**/
static int i40e_ndo_bridge_setlink(struct net_device *dev,
- struct nlmsghdr *nlh)
+ struct nlmsghdr *nlh,
+ u16 flags)
{
struct i40e_netdev_priv *np = netdev_priv(dev);
struct i40e_vsi *vsi = np->vsi;
@@ -8078,14 +8078,9 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev,
* Return the mode in which the hardware bridge is operating in
* i.e VEB or VEPA.
**/
-#ifdef HAVE_BRIDGE_FILTER
static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev,
u32 filter_mask, int nlflags)
-#else
-static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
- struct net_device *dev, int nlflags)
-#endif /* HAVE_BRIDGE_FILTER */
{
struct i40e_netdev_priv *np = netdev_priv(dev);
struct i40e_vsi *vsi = np->vsi;
@@ -8109,7 +8104,6 @@ static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
return ndo_dflt_bridge_getlink(skb, pid, seq, dev, veb->bridge_mode,
nlflags, 0, 0, filter_mask, NULL);
}
-#endif /* HAVE_BRIDGE_ATTRIBS */
#define I40E_MAX_TUNNEL_HDR_LEN 80
/**
@@ -8165,10 +8159,8 @@ static const struct net_device_ops i40e_netdev_ops = {
.ndo_get_phys_port_id = i40e_get_phys_port_id,
.ndo_fdb_add = i40e_ndo_fdb_add,
.ndo_features_check = i40e_features_check,
-#ifdef HAVE_BRIDGE_ATTRIBS
.ndo_bridge_getlink = i40e_ndo_bridge_getlink,
.ndo_bridge_setlink = i40e_ndo_bridge_setlink,
-#endif /* HAVE_BRIDGE_ATTRIBS */
};
/**
--
2.4.3
next prev parent reply other threads:[~2015-07-15 1:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-15 1:30 [net-next v2 00/16][pull request] Intel Wired LAN Driver Updates 2015-07-14 Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 01/16] i40e: Implement ndo_features_check() Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 02/16] i40e/i40evf: Add stats to track FD ATR and SB dynamic enable state Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 03/16] i40e/i40evf: Update Flex-10 related device/function capabilities Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 04/16] i40e/i40evf: improve Tx performance with a small tweak Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 05/16] i40evf: Allow for an abundance of vectors Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 06/16] i40e: ignore duplicate port VLAN requests Jeff Kirsher
2015-07-15 19:24 ` Sergei Shtylyov
2015-07-15 1:30 ` Jeff Kirsher [this message]
2015-07-15 1:30 ` [net-next v2 08/16] i40e/i40evf: Update the admin queue command header Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 09/16] i40e: correctly program filters for VFs Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 10/16] i40e: do a proper reset when disabling a VF Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 11/16] i40e: un-disable VF after reset Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 12/16] i40evf: don't delete all the filters Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 13/16] i40evf: add MAC address filter in open, not init Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 14/16] i40e/i40evf: Add support for pre-allocated pages for PD Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 15/16] i40e: Refine an error message to avoid confusion Jeff Kirsher
2015-07-15 1:30 ` [net-next v2 16/16] i40e/i40evf: Bump version to 1.3.6 for i40e and 1.3.2 for i40evf Jeff Kirsher
2015-07-16 0:31 ` [net-next v2 00/16][pull request] Intel Wired LAN Driver Updates 2015-07-14 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436923840-24455-8-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=carolyn.wyborny@intel.com \
--cc=catherine.sullivan@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).