From: Joachim Eastwood <manabian@gmail.com>
To: peppe.cavallaro@st.com, davem@davemloft.net
Cc: Joachim Eastwood <manabian@gmail.com>, netdev@vger.kernel.org
Subject: [PATCH net-next 3/8] stmmac: introduce stmmac_get_platform_resources()
Date: Fri, 17 Jul 2015 00:26:07 +0200 [thread overview]
Message-ID: <1437085572-11371-4-git-send-email-manabian@gmail.com> (raw)
In-Reply-To: <1437085572-11371-1-git-send-email-manabian@gmail.com>
Refactor all code that deals with platform resources into it's
own get function. This function will later be used in the probe
function in dwmac-* drivers.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 64 +++++++++++++---------
1 file changed, 37 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6e6ef859f58a..94962d75b99a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -262,33 +262,23 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
}
#endif /* CONFIG_OF */
-/**
- * stmmac_pltfr_probe - platform driver probe.
- * @pdev: platform device pointer
- * Description: platform_device probe function. It is to allocate
- * the necessary platform resources, invoke custom helper (if required) and
- * invoke the main probe function.
- */
-int stmmac_pltfr_probe(struct platform_device *pdev)
+static int stmmac_get_platform_resources(struct platform_device *pdev,
+ struct stmmac_resources *stmmac_res)
{
- struct stmmac_resources stmmac_res;
- int ret = 0;
struct resource *res;
- struct device *dev = &pdev->dev;
- struct plat_stmmacenet_data *plat_dat = NULL;
- memset(&stmmac_res, 0, sizeof(stmmac_res));
+ memset(stmmac_res, 0, sizeof(*stmmac_res));
/* Get IRQ information early to have an ability to ask for deferred
* probe if needed before we went too far with resource allocation.
*/
- stmmac_res.irq = platform_get_irq_byname(pdev, "macirq");
- if (stmmac_res.irq < 0) {
- if (stmmac_res.irq != -EPROBE_DEFER) {
- dev_err(dev,
+ stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
+ if (stmmac_res->irq < 0) {
+ if (stmmac_res->irq != -EPROBE_DEFER) {
+ dev_err(&pdev->dev,
"MAC IRQ configuration information not found\n");
}
- return stmmac_res.irq;
+ return stmmac_res->irq;
}
/* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
@@ -298,21 +288,41 @@ int stmmac_pltfr_probe(struct platform_device *pdev)
* In case the wake up interrupt is not passed from the platform
* so the driver will continue to use the mac irq (ndev->irq)
*/
- stmmac_res.wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
- if (stmmac_res.wol_irq < 0) {
- if (stmmac_res.wol_irq == -EPROBE_DEFER)
+ stmmac_res->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
+ if (stmmac_res->wol_irq < 0) {
+ if (stmmac_res->wol_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
- stmmac_res.wol_irq = stmmac_res.irq;
+ stmmac_res->wol_irq = stmmac_res->irq;
}
- stmmac_res.lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
- if (stmmac_res.lpi_irq == -EPROBE_DEFER)
+ stmmac_res->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+ if (stmmac_res->lpi_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- stmmac_res.addr = devm_ioremap_resource(dev, res);
- if (IS_ERR(stmmac_res.addr))
- return PTR_ERR(stmmac_res.addr);
+ stmmac_res->addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(stmmac_res->addr))
+ return PTR_ERR(stmmac_res->addr);
+
+ return 0;
+}
+
+/**
+ * stmmac_pltfr_probe - platform driver probe.
+ * @pdev: platform device pointer
+ * Description: platform_device probe function. It is to allocate
+ * the necessary platform resources, invoke custom helper (if required) and
+ * invoke the main probe function.
+ */
+int stmmac_pltfr_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
if (pdev->dev.of_node) {
ret = stmmac_probe_config_dt(pdev, &plat_dat, &stmmac_res.mac);
--
1.8.0
next prev parent reply other threads:[~2015-07-16 22:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 22:26 [PATCH net-next 0/8] stmmac clean up for 4.3 part1 Joachim Eastwood
2015-07-16 22:26 ` [PATCH net-next 1/8] stmmac: use of_device_get_match_data to retrieve of match data Joachim Eastwood
2015-07-16 22:26 ` [PATCH net-next 2/8] stmmac: clean up platform/of_match data retrieval Joachim Eastwood
2015-07-16 22:26 ` Joachim Eastwood [this message]
2015-07-16 22:26 ` [PATCH net-next 4/8] stmmac: make stmmac_probe_config_dt return the platform data struct Joachim Eastwood
2015-07-16 22:26 ` [PATCH net-next 5/8] stmmac: export probe_config_dt() and get_platform_resources() Joachim Eastwood
2015-07-16 22:26 ` [PATCH net-next 6/8] stmmac: add proper probe function to dwmac-lpc18xx Joachim Eastwood
2015-07-16 22:26 ` [PATCH net-next 7/8] stmmac: add proper probe function to dwmac-meson Joachim Eastwood
2015-07-16 22:26 ` [PATCH net-next 8/8] stmmac: drop custom_* fields from plat_stmmacenet_data Joachim Eastwood
2015-07-21 3:46 ` [PATCH net-next 0/8] stmmac clean up for 4.3 part1 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437085572-11371-4-git-send-email-manabian@gmail.com \
--to=manabian@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).