Netdev List
 help / color / mirror / Atom feed
From: Alex Gartrell <agartrell@fb.com>
To: <davem@davemloft.net>, <ast@kernel.org>
Cc: <daniel@iogearbox.net>, <netdev@vger.kernel.org>,
	<kernel-team@fb.com>, Alex Gartrell <agartrell@fb.com>
Subject: [PATCH net-next] ebpf: Allow dereferences of PTR_TO_STACK registers
Date: Thu, 23 Jul 2015 14:24:40 -0700	[thread overview]
Message-ID: <1437686680-1157510-1-git-send-email-agartrell@fb.com> (raw)

        mov %rsp, %r1           ; r1 = rsp
        add $-8, %r1            ; r1 = rsp - 8
        store_q $123, -8(%rsp)  ; *(u64*)r1 = 123  <- valid
        store_q $123, (%r1)     ; *(u64*)r1 = 123  <- previously invalid
        mov $0, %r0
        exit                    ; Always need to exit

And we'd get the following error:

	0: (bf) r1 = r10
	1: (07) r1 += -8
	2: (7a) *(u64 *)(r10 -8) = 999
	3: (7a) *(u64 *)(r1 +0) = 999
	R1 invalid mem access 'fp'

	Unable to load program

We already know that a register is a stack address and the appropriate
offset, so we should be able to validate those references as well.

Signed-off-by: Alex Gartrell <agartrell@fb.com>
---
 kernel/bpf/verifier.c       |  6 ++++-
 samples/bpf/test_verifier.c | 59 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 039d866..cd307df 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -648,6 +648,9 @@ static int check_mem_access(struct verifier_env *env, u32 regno, int off,
 	struct verifier_state *state = &env->cur_state;
 	int size, err = 0;
 
+	if (state->regs[regno].type == PTR_TO_STACK)
+		off += state->regs[regno].imm;
+
 	size = bpf_size_to_bytes(bpf_size);
 	if (size < 0)
 		return size;
@@ -667,7 +670,8 @@ static int check_mem_access(struct verifier_env *env, u32 regno, int off,
 		if (!err && t == BPF_READ && value_regno >= 0)
 			mark_reg_unknown_value(state->regs, value_regno);
 
-	} else if (state->regs[regno].type == FRAME_PTR) {
+	} else if (state->regs[regno].type == FRAME_PTR ||
+		   state->regs[regno].type == PTR_TO_STACK) {
 		if (off >= 0 || off < -MAX_BPF_STACK) {
 			verbose("invalid stack off=%d size=%d\n", off, size);
 			return -EACCES;
diff --git a/samples/bpf/test_verifier.c b/samples/bpf/test_verifier.c
index 6936059..ee0f110 100644
--- a/samples/bpf/test_verifier.c
+++ b/samples/bpf/test_verifier.c
@@ -822,6 +822,65 @@ static struct bpf_test tests[] = {
 		.result = ACCEPT,
 		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	},
+	{
+		"PTR_TO_STACK store/load",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -10),
+			BPF_ST_MEM(BPF_DW, BPF_REG_1, 2, 0xfaceb00c),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 2),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+	},
+	{
+		"PTR_TO_STACK store/load - bad alignment on off",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8),
+			BPF_ST_MEM(BPF_DW, BPF_REG_1, 2, 0xfaceb00c),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 2),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "misaligned access off -6 size 8",
+	},
+	{
+		"PTR_TO_STACK store/load - bad alignment on reg",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -10),
+			BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 0xfaceb00c),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 8),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "misaligned access off -2 size 8",
+	},
+	{
+		"PTR_TO_STACK store/load - out of bounds low",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -80000),
+			BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 0xfaceb00c),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 8),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid stack off=-79992 size=8",
+	},
+	{
+		"PTR_TO_STACK store/load - out of bounds high",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8),
+			BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 0xfaceb00c),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 8),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "invalid stack off=0 size=8",
+	},
 };
 
 static int probe_filter_length(struct bpf_insn *fp)
-- 
Alex Gartrell <agartrell@fb.com>

             reply	other threads:[~2015-07-23 21:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-23 21:24 Alex Gartrell [this message]
2015-07-23 21:47 ` [PATCH net-next] ebpf: Allow dereferences of PTR_TO_STACK registers Alexei Starovoitov
2015-07-27  7:54 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437686680-1157510-1-git-send-email-agartrell@fb.com \
    --to=agartrell@fb.com \
    --cc=ast@kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=kernel-team@fb.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox