From: "Jason A. Donenfeld" <Jason@zx2c4.com>
To: David Vrabel <david.vrabel@citrix.com>,
Ian Campbell <ian.campbell@citrix.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
xen-devel@lists.xen.org
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>, <stable@vger.kernel.org>
Subject: [PATCH v2] xen-apic: Enable on domU as well
Date: Thu, 6 Aug 2015 18:37:05 +0200 [thread overview]
Message-ID: <1438879025-27362-1-git-send-email-Jason@zx2c4.com> (raw)
In-Reply-To: <1438878579-26856-1-git-send-email-Jason@zx2c4.com>
It turns out that domU also requires the Xen APIC driver. Otherwise we
get stuck in busy loops that never exit, such as in this stack trace:
(gdb) target remote localhost:9999
Remote debugging using localhost:9999
__xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
(gdb) bt
#0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
#1 __default_send_IPI_shortcut (shortcut=<optimized out>,
dest=<optimized out>, vector=<optimized out>) at
./arch/x86/include/asm/ipi.h:75
#2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54
#3 0xffffffff81011336 in arch_irq_work_raise () at
arch/x86/kernel/irq_work.c:47
#4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at
kernel/irq_work.c:100
#5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633
#6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized
out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>,
fmt=<optimized out>, args=<optimized out>)
at kernel/printk/printk.c:1778
#7 0xffffffff816010c8 in printk (fmt=<optimized out>) at
kernel/printk/printk.c:1868
#8 0xffffffffc00013ea in ?? ()
#9 0x0000000000000000 in ?? ()
Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: <stable@vger.kernel.org>
---
arch/x86/xen/Makefile | 4 ++--
arch/x86/xen/xen-ops.h | 11 ++++-------
2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 7322755..4b6e29a 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -13,13 +13,13 @@ CFLAGS_mmu.o := $(nostackp)
obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o platform-pci-unplug.o \
- p2m.o
+ p2m.o apic.o
obj-$(CONFIG_EVENT_TRACING) += trace.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
-obj-$(CONFIG_XEN_DOM0) += apic.o vga.o
+obj-$(CONFIG_XEN_DOM0) += vga.o
obj-$(CONFIG_SWIOTLB_XEN) += pci-swiotlb-xen.o
obj-$(CONFIG_XEN_EFI) += efi.o
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index c20fe29..cd248ff 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -98,20 +98,17 @@ static inline void xen_uninit_lock_cpu(int cpu)
#endif
struct dom0_vga_console_info;
-
#ifdef CONFIG_XEN_DOM0
void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size);
-void __init xen_init_apic(void);
#else
-static inline void __init xen_init_vga(const struct dom0_vga_console_info *info,
- size_t size)
-{
-}
-static inline void __init xen_init_apic(void)
+void __init xen_init_vga(const struct dom0_vga_console_info *info,
+ size_t size);
{
}
#endif
+void __init xen_init_apic(void);
+
#ifdef CONFIG_XEN_EFI
extern void xen_efi_init(void);
#else
--
2.5.0
next prev parent reply other threads:[~2015-08-06 16:37 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-04 16:41 printk from softirq on xen: hard lockup Jason A. Donenfeld
2015-08-04 17:12 ` [Xen-devel] " David Vrabel
2015-08-04 17:45 ` Jason A. Donenfeld
2015-08-04 23:01 ` [Xen-devel] " Jason A. Donenfeld
2015-08-06 10:02 ` David Vrabel
2015-08-06 15:58 ` Jason A. Donenfeld
2015-08-06 16:10 ` David Vrabel
2015-08-06 16:21 ` Jason A. Donenfeld
2015-08-06 16:29 ` [PATCH] xen-apic: Enable on domU as well Jason A. Donenfeld
2015-08-06 16:37 ` Jason A. Donenfeld [this message]
2015-08-07 14:23 ` [Xen-devel] [PATCH v2] " Konrad Rzeszutek Wilk
2015-08-07 14:37 ` Jason A. Donenfeld
2015-08-10 13:40 ` [PATCH v3] " Jason A. Donenfeld
2015-08-10 13:41 ` David Vrabel
2015-08-10 13:44 ` Jason A. Donenfeld
2015-08-11 10:46 ` [Xen-devel] " David Vrabel
2015-08-05 16:37 ` [Xen-devel] printk from softirq on xen: hard lockup Jason A. Donenfeld
2015-08-06 8:22 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438879025-27362-1-git-send-email-Jason@zx2c4.com \
--to=jason@zx2c4.com \
--cc=david.vrabel@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).