netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Cc: Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] net: sun4i-emac: Claim emac sram
Date: Sun, 23 Aug 2015 20:31:38 +0200	[thread overview]
Message-ID: <1440354698-11144-1-git-send-email-hdegoede@redhat.com> (raw)

Claim the emac sram ourselves, rather then relying on the bootloader
having mapped the sram to the emac controller during boot.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index bab01c84..48ce83e 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -28,6 +28,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/soc/sunxi/sunxi_sram.h>
 
 #include "sun4i-emac.h"
 
@@ -857,11 +858,17 @@ static int emac_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(db->clk);
 
+	ret = sunxi_sram_claim(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Error couldn't map SRAM to device\n");
+		goto out;
+	}
+
 	db->phy_node = of_parse_phandle(np, "phy", 0);
 	if (!db->phy_node) {
 		dev_err(&pdev->dev, "no associated PHY\n");
 		ret = -ENODEV;
-		goto out;
+		goto out_release_sram;
 	}
 
 	/* Read MAC-address from DT */
@@ -893,7 +900,7 @@ static int emac_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Registering netdev failed!\n");
 		ret = -ENODEV;
-		goto out;
+		goto out_release_sram;
 	}
 
 	dev_info(&pdev->dev, "%s: at %p, IRQ %d MAC: %pM\n",
@@ -901,6 +908,8 @@ static int emac_probe(struct platform_device *pdev)
 
 	return 0;
 
+out_release_sram:
+	sunxi_sram_release(&pdev->dev);
 out:
 	dev_err(db->dev, "not found (%d).\n", ret);
 
-- 
2.4.3

             reply	other threads:[~2015-08-23 18:31 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-23 18:31 Hans de Goede [this message]
     [not found] ` <1440354698-11144-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-08-24  7:46   ` [PATCH] net: sun4i-emac: Claim emac sram Maxime Ripard
2015-08-24  9:17     ` Hans de Goede
     [not found]       ` <55DAE137.4040306-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-08-24 13:39         ` Maxime Ripard
2015-08-25 20:49 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440354698-11144-1-git-send-email-hdegoede@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
    --cc=jelle-oJJ1AqDjjO4@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).