netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ondrej Zary <linux@rainbow-software.org>
To: Dan Williams <dcbw@redhat.com>
Cc: netdev@vger.kernel.org,
	Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2 v2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM
Date: Tue, 15 Sep 2015 17:18:08 +0200	[thread overview]
Message-ID: <1442330289-2907-1-git-send-email-linux@rainbow-software.org> (raw)

IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
wpa_supplicant uses it for both no encryption and WEP open system.
Cache the last mode set (only of these two) and use it here.

This allows wpa_supplicant to work with unencrypted APs.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
 drivers/net/wireless/airo.c |   33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index d0c97c2..a8f2767 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1237,6 +1237,7 @@ struct airo_info {
 
 	int			wep_capable;
 	int			max_wep_idx;
+	int			last_auth;
 
 	/* WPA-related stuff */
 	unsigned int bssListFirst;
@@ -3863,6 +3864,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
 		}
 		ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
 		ai->config.authType = AUTH_OPEN;
+		ai->last_auth = AUTH_OPEN;
 		ai->config.modulation = MOD_CCK;
 
 		if (le16_to_cpu(cap_rid.len) >= sizeof(cap_rid) &&
@@ -6370,6 +6372,7 @@ static int airo_set_encode(struct net_device *dev,
 		if((index == current_index) && (key.len > 0) &&
 		   (local->config.authType == AUTH_OPEN)) {
 			local->config.authType = AUTH_ENCRYPT;
+			local->last_auth = AUTH_ENCRYPT;
 		}
 	} else {
 		/* Do we want to just set the transmit key index ? */
@@ -6389,12 +6392,16 @@ static int airo_set_encode(struct net_device *dev,
 		}
 	}
 	/* Read the flags */
-	if(dwrq->flags & IW_ENCODE_DISABLED)
+	if (dwrq->flags & IW_ENCODE_DISABLED) {
 		local->config.authType = AUTH_OPEN;	// disable encryption
+		local->last_auth = AUTH_OPEN;
+	}
 	if(dwrq->flags & IW_ENCODE_RESTRICTED)
 		local->config.authType = AUTH_SHAREDKEY;	// Only Both
-	if(dwrq->flags & IW_ENCODE_OPEN)
+	if (dwrq->flags & IW_ENCODE_OPEN) {
 		local->config.authType = AUTH_ENCRYPT;	// Only Wep
+		local->last_auth = AUTH_ENCRYPT;
+	}
 	/* Commit the changes to flags if needed */
 	if (local->config.authType != currentAuthType)
 		set_bit (FLAG_COMMIT, &local->flags);
@@ -6549,12 +6556,16 @@ static int airo_set_encodeext(struct net_device *dev,
 	}
 
 	/* Read the flags */
-	if(encoding->flags & IW_ENCODE_DISABLED)
+	if (encoding->flags & IW_ENCODE_DISABLED) {
 		local->config.authType = AUTH_OPEN;	// disable encryption
+		local->last_auth = AUTH_OPEN;
+	}
 	if(encoding->flags & IW_ENCODE_RESTRICTED)
 		local->config.authType = AUTH_SHAREDKEY;	// Only Both
-	if(encoding->flags & IW_ENCODE_OPEN)
+	if (encoding->flags & IW_ENCODE_OPEN) {
 		local->config.authType = AUTH_ENCRYPT;	// Only Wep
+		local->last_auth = AUTH_ENCRYPT;
+	}
 	/* Commit the changes to flags if needed */
 	if (local->config.authType != currentAuthType)
 		set_bit (FLAG_COMMIT, &local->flags);
@@ -6658,10 +6669,13 @@ static int airo_set_auth(struct net_device *dev,
 	case IW_AUTH_DROP_UNENCRYPTED:
 		if (param->value) {
 			/* Only change auth type if unencrypted */
-			if (currentAuthType == AUTH_OPEN)
+			if (currentAuthType == AUTH_OPEN) {
 				local->config.authType = AUTH_ENCRYPT;
+				local->last_auth = AUTH_ENCRYPT;
+			}
 		} else {
 			local->config.authType = AUTH_OPEN;
+			local->last_auth = AUTH_OPEN;
 		}
 
 		/* Commit the changes to flags if needed */
@@ -6670,13 +6684,14 @@ static int airo_set_auth(struct net_device *dev,
 		break;
 
 	case IW_AUTH_80211_AUTH_ALG: {
-			/* FIXME: What about AUTH_OPEN?  This API seems to
-			 * disallow setting our auth to AUTH_OPEN.
-			 */
 			if (param->value & IW_AUTH_ALG_SHARED_KEY) {
 				local->config.authType = AUTH_SHAREDKEY;
 			} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
-				local->config.authType = AUTH_ENCRYPT;
+				/* We don't know here if WEP open system or
+				 * unencrypted mode was requested - so use the
+				 * last mode (of these two) used last time
+				 */
+				local->config.authType = local->last_auth;
 			} else
 				return -EINVAL;
 
-- 
Ondrej Zary

             reply	other threads:[~2015-09-15 15:18 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-15 15:18 Ondrej Zary [this message]
2015-09-15 15:18 ` [PATCH 2/2] airo: Implement netif_carrier_on/off Ondrej Zary
2015-09-16 14:30   ` Sergei Shtylyov
2015-09-18 16:54 ` [PATCH 1/2 v2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM Dan Williams
2015-09-18 20:06   ` Ondrej Zary
2015-09-18 21:40     ` Dan Williams
2015-09-21 11:39 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442330289-2907-1-git-send-email-linux@rainbow-software.org \
    --to=linux@rainbow-software.org \
    --cc=dcbw@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).