netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dcbw-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Ondrej Zary <linux-ZCIryABCsrmttCpgsWEBFmD2FQJk+8+b@public.gmane.org>
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Kernel development list
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v3 1/2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM
Date: Mon, 21 Sep 2015 11:22:32 -0500	[thread overview]
Message-ID: <1442852552.2798.4.camel@redhat.com> (raw)
In-Reply-To: <1442843065-30234-1-git-send-email-linux-ZCIryABCsrmttCpgsWEBFmD2FQJk+8+b@public.gmane.org>

On Mon, 2015-09-21 at 15:44 +0200, Ondrej Zary wrote:
> IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
> wpa_supplicant uses it for both no encryption and WEP open system.
> Cache the last mode set (only of these two) and use it here.
> 
> This allows wpa_supplicant to work with unencrypted APs.

Looks OK to me.

Dan

> Signed-off-by: Ondrej Zary <linux-ZCIryABCsrmttCpgsWEBFmD2FQJk+8+b@public.gmane.org>
> ---
>  drivers/net/wireless/airo.c |   59 +++++++++++++++++++++++++------------------
>  1 file changed, 35 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
> index d0c97c2..67001a8 100644
> --- a/drivers/net/wireless/airo.c
> +++ b/drivers/net/wireless/airo.c
> @@ -1237,6 +1237,7 @@ struct airo_info {
>  
>  	int			wep_capable;
>  	int			max_wep_idx;
> +	int			last_auth;
>  
>  	/* WPA-related stuff */
>  	unsigned int bssListFirst;
> @@ -3786,6 +3787,16 @@ badrx:
>  	}
>  }
>  
> +static inline void set_auth_type(struct airo_info *local, int auth_type)
> +{
> +	local->config.authType = auth_type;
> +	/* Cache the last auth type used (of AUTH_OPEN and AUTH_ENCRYPT).
> +	 * Used by airo_set_auth()
> +	 */
> +	if (auth_type == AUTH_OPEN || auth_type == AUTH_ENCRYPT)
> +		local->last_auth = auth_type;
> +}
> +
>  static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
>  {
>  	Cmd cmd;
> @@ -3862,7 +3873,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
>  						"level scale");
>  		}
>  		ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
> -		ai->config.authType = AUTH_OPEN;
> +		set_auth_type(ai, AUTH_OPEN);
>  		ai->config.modulation = MOD_CCK;
>  
>  		if (le16_to_cpu(cap_rid.len) >= sizeof(cap_rid) &&
> @@ -4880,13 +4891,13 @@ static void proc_config_on_close(struct inode *inode, struct file *file)
>  			line += 5;
>  			switch( line[0] ) {
>  			case 's':
> -				ai->config.authType = AUTH_SHAREDKEY;
> +				set_auth_type(ai, AUTH_SHAREDKEY);
>  				break;
>  			case 'e':
> -				ai->config.authType = AUTH_ENCRYPT;
> +				set_auth_type(ai, AUTH_ENCRYPT);
>  				break;
>  			default:
> -				ai->config.authType = AUTH_OPEN;
> +				set_auth_type(ai, AUTH_OPEN);
>  				break;
>  			}
>  			set_bit (FLAG_COMMIT, &ai->flags);
> @@ -6368,9 +6379,8 @@ static int airo_set_encode(struct net_device *dev,
>  		 * should be enabled (user may turn it off later)
>  		 * This is also how "iwconfig ethX key on" works */
>  		if((index == current_index) && (key.len > 0) &&
> -		   (local->config.authType == AUTH_OPEN)) {
> -			local->config.authType = AUTH_ENCRYPT;
> -		}
> +		   (local->config.authType == AUTH_OPEN))
> +			set_auth_type(local, AUTH_ENCRYPT);
>  	} else {
>  		/* Do we want to just set the transmit key index ? */
>  		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
> @@ -6389,12 +6399,12 @@ static int airo_set_encode(struct net_device *dev,
>  		}
>  	}
>  	/* Read the flags */
> -	if(dwrq->flags & IW_ENCODE_DISABLED)
> -		local->config.authType = AUTH_OPEN;	// disable encryption
> +	if (dwrq->flags & IW_ENCODE_DISABLED)
> +		set_auth_type(local, AUTH_OPEN);	/* disable encryption */
>  	if(dwrq->flags & IW_ENCODE_RESTRICTED)
> -		local->config.authType = AUTH_SHAREDKEY;	// Only Both
> -	if(dwrq->flags & IW_ENCODE_OPEN)
> -		local->config.authType = AUTH_ENCRYPT;	// Only Wep
> +		set_auth_type(local, AUTH_SHAREDKEY);	/* Only Both */
> +	if (dwrq->flags & IW_ENCODE_OPEN)
> +		set_auth_type(local, AUTH_ENCRYPT);	/* Only Wep */
>  	/* Commit the changes to flags if needed */
>  	if (local->config.authType != currentAuthType)
>  		set_bit (FLAG_COMMIT, &local->flags);
> @@ -6549,12 +6559,12 @@ static int airo_set_encodeext(struct net_device *dev,
>  	}
>  
>  	/* Read the flags */
> -	if(encoding->flags & IW_ENCODE_DISABLED)
> -		local->config.authType = AUTH_OPEN;	// disable encryption
> +	if (encoding->flags & IW_ENCODE_DISABLED)
> +		set_auth_type(local, AUTH_OPEN);	/* disable encryption */
>  	if(encoding->flags & IW_ENCODE_RESTRICTED)
> -		local->config.authType = AUTH_SHAREDKEY;	// Only Both
> -	if(encoding->flags & IW_ENCODE_OPEN)
> -		local->config.authType = AUTH_ENCRYPT;	// Only Wep
> +		set_auth_type(local, AUTH_SHAREDKEY);	/* Only Both */
> +	if (encoding->flags & IW_ENCODE_OPEN)
> +		set_auth_type(local, AUTH_ENCRYPT);
>  	/* Commit the changes to flags if needed */
>  	if (local->config.authType != currentAuthType)
>  		set_bit (FLAG_COMMIT, &local->flags);
> @@ -6659,9 +6669,9 @@ static int airo_set_auth(struct net_device *dev,
>  		if (param->value) {
>  			/* Only change auth type if unencrypted */
>  			if (currentAuthType == AUTH_OPEN)
> -				local->config.authType = AUTH_ENCRYPT;
> +				set_auth_type(local, AUTH_ENCRYPT);
>  		} else {
> -			local->config.authType = AUTH_OPEN;
> +			set_auth_type(local, AUTH_OPEN);
>  		}
>  
>  		/* Commit the changes to flags if needed */
> @@ -6670,13 +6680,14 @@ static int airo_set_auth(struct net_device *dev,
>  		break;
>  
>  	case IW_AUTH_80211_AUTH_ALG: {
> -			/* FIXME: What about AUTH_OPEN?  This API seems to
> -			 * disallow setting our auth to AUTH_OPEN.
> -			 */
>  			if (param->value & IW_AUTH_ALG_SHARED_KEY) {
> -				local->config.authType = AUTH_SHAREDKEY;
> +				set_auth_type(local, AUTH_SHAREDKEY);
>  			} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
> -				local->config.authType = AUTH_ENCRYPT;
> +				/* We don't know here if WEP open system or
> +				 * unencrypted mode was requested - so use the
> +				 * last mode (of these two) used last time
> +				 */
> +				set_auth_type(local, local->last_auth);
>  			} else
>  				return -EINVAL;
>  


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-09-21 16:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-21 13:44 [PATCH v3 1/2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM Ondrej Zary
2015-09-21 13:44 ` [PATCH v3 2/2] airo: Implement netif_carrier_on/off Ondrej Zary
     [not found] ` <1442843065-30234-1-git-send-email-linux-ZCIryABCsrmttCpgsWEBFmD2FQJk+8+b@public.gmane.org>
2015-09-21 16:22   ` Dan Williams [this message]
2015-09-29  8:08 ` [v3,1/2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442852552.2798.4.camel@redhat.com \
    --to=dcbw-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=linux-ZCIryABCsrmttCpgsWEBFmD2FQJk+8+b@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).