From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: <netdev@vger.kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
"David S. Miller" <davem@davemloft.net>,
<linux-m68k@vger.kernel.org>
Subject: [PATCH 5/6] net/ethernet: make 8390/mac8390.c driver explicitly non-modular
Date: Mon, 28 Sep 2015 15:51:29 -0400 [thread overview]
Message-ID: <1443469890-19485-6-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1443469890-19485-1-git-send-email-paul.gortmaker@windriver.com>
The Kconfig for this option is currently:
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned -- it was never
even updated to use module_init/module_exit. After this, when reading
the driver there should be no doubt it is builtin-only.
We don't swap module.h for init.h since this file has init.h already.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We move the information from MODULE_AUTHOR to the comments at the top
of the file for documentation purposes.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/net/ethernet/8390/mac8390.c | 40 ++-----------------------------------
1 file changed, 2 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c
index 65cf60f6718c..a971bf629715 100644
--- a/drivers/net/ethernet/8390/mac8390.c
+++ b/drivers/net/ethernet/8390/mac8390.c
@@ -4,6 +4,8 @@
taken from or inspired by skeleton.c by Donald Becker, acenic.c by
Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker.
+ Author: David Huggins-Daines <dhd@debian.org> and others.
+
This software may be used and distributed according to the terms of
the GNU Public License, incorporated herein by reference. */
@@ -19,7 +21,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fcntl.h>
@@ -449,43 +450,6 @@ out:
return ERR_PTR(err);
}
-#ifdef MODULE
-MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others");
-MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* overkill, of course */
-static struct net_device *dev_mac8390[15];
-int init_module(void)
-{
- int i;
- for (i = 0; i < 15; i++) {
- struct net_device *dev = mac8390_probe(-1);
- if (IS_ERR(dev))
- break;
- dev_mac890[i] = dev;
- }
- if (!i) {
- pr_notice("No useable cards found, driver NOT installed.\n");
- return -ENODEV;
- }
- return 0;
-}
-
-void cleanup_module(void)
-{
- int i;
- for (i = 0; i < 15; i++) {
- struct net_device *dev = dev_mac890[i];
- if (dev) {
- unregister_netdev(dev);
- free_netdev(dev);
- }
- }
-}
-
-#endif /* MODULE */
-
static const struct net_device_ops mac8390_netdev_ops = {
.ndo_open = mac8390_open,
.ndo_stop = mac8390_close,
--
2.6.0.rc3
next prev parent reply other threads:[~2015-09-28 19:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-28 19:51 [PATCH net-next 0/6] make non-modular code explicitly non-modular Paul Gortmaker
2015-09-28 19:51 ` [PATCH 1/6] net/core: make sock_diag.c " Paul Gortmaker
2015-09-28 19:51 ` [PATCH 2/6] net/dcb: make dcbnl.c " Paul Gortmaker
2015-09-28 19:51 ` [PATCH 3/6] net/sched: make sch_blackhole.c " Paul Gortmaker
2015-09-28 19:51 ` [PATCH 4/6] net/ethernet: make amd/hplance.c driver " Paul Gortmaker
2015-09-28 19:51 ` Paul Gortmaker [this message]
2015-09-28 19:51 ` [PATCH 6/6] net/ethernet: make apple/macmace.c " Paul Gortmaker
2015-09-28 21:09 ` [PATCH net-next 0/6] make non-modular code " Geert Uytterhoeven
2015-09-28 21:32 ` Paul Gortmaker
2015-09-29 6:32 ` Finn Thain
2015-09-29 13:33 ` Paul Gortmaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443469890-19485-6-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=linux-m68k@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).