From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Shannon Nelson <shannon.nelson@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 09/17] i40e: limit debugfs io ops
Date: Wed, 30 Sep 2015 05:52:33 -0700 [thread overview]
Message-ID: <1443617561-40490-10-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1443617561-40490-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Shannon Nelson <shannon.nelson@intel.com>
Don't let the debugfs register read and write commands try to access
outside of the ioremapped space. While we're at it, remove the use of
a misleading constant.
Change-ID: Ifce2893e232c65c7a76c23532c658f298218a81b
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e.h | 3 ++-
drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 12 ++++++------
drivers/net/ethernet/intel/i40e/i40e_main.c | 9 ++++-----
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index c64d18d..0044cb0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -71,7 +71,6 @@
#define I40E_MAX_VEB 16
#define I40E_MAX_NUM_DESCRIPTORS 4096
-#define I40E_MAX_REGISTER 0x800000
#define I40E_MAX_CSR_SPACE (4 * 1024 * 1024 - 64 * 1024)
#define I40E_DEFAULT_NUM_DESCRIPTORS 512
#define I40E_REQ_DESCRIPTOR_MULTIPLE 32
@@ -408,6 +407,8 @@ struct i40e_pf {
/* These are only valid in NPAR modes */
u32 npar_max_bw;
u32 npar_min_bw;
+
+ u32 ioremap_len;
};
struct i40e_mac_filter {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 508efb0..ee96106 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1495,9 +1495,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
}
/* check the range on address */
- if (address >= I40E_MAX_REGISTER) {
- dev_info(&pf->pdev->dev, "read reg address 0x%08x too large\n",
- address);
+ if (address > (pf->ioremap_len - sizeof(u32))) {
+ dev_info(&pf->pdev->dev, "read reg address 0x%08x too large, max=0x%08lx\n",
+ address, (pf->ioremap_len - sizeof(u32)));
goto command_write_done;
}
@@ -1514,9 +1514,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
}
/* check the range on address */
- if (address >= I40E_MAX_REGISTER) {
- dev_info(&pf->pdev->dev, "write reg address 0x%08x too large\n",
- address);
+ if (address > (pf->ioremap_len - sizeof(u32))) {
+ dev_info(&pf->pdev->dev, "write reg address 0x%08x too large, max=0x%08lx\n",
+ address, (pf->ioremap_len - sizeof(u32)));
goto command_write_done;
}
wr32(&pf->hw, address, value);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3a3d49c..940744a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9939,7 +9939,6 @@ static void i40e_print_features(struct i40e_pf *pf)
static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct i40e_aq_get_phy_abilities_resp abilities;
- unsigned long ioremap_len;
struct i40e_pf *pf;
struct i40e_hw *hw;
static u16 pfs_found;
@@ -9992,15 +9991,15 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw = &pf->hw;
hw->back = pf;
- ioremap_len = min_t(unsigned long, pci_resource_len(pdev, 0),
- I40E_MAX_CSR_SPACE);
+ pf->ioremap_len = min_t(int, pci_resource_len(pdev, 0),
+ I40E_MAX_CSR_SPACE);
- hw->hw_addr = ioremap(pci_resource_start(pdev, 0), ioremap_len);
+ hw->hw_addr = ioremap(pci_resource_start(pdev, 0), pf->ioremap_len);
if (!hw->hw_addr) {
err = -EIO;
dev_info(&pdev->dev, "ioremap(0x%04x, 0x%04x) failed: 0x%x\n",
(unsigned int)pci_resource_start(pdev, 0),
- (unsigned int)pci_resource_len(pdev, 0), err);
+ pf->ioremap_len, err);
goto err_ioremap;
}
hw->vendor_id = pdev->vendor;
--
2.4.3
next prev parent reply other threads:[~2015-09-30 12:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 12:52 [net-next 00/17][pull request] Intel Wired LAN Driver Updates 2015-09-30 Jeff Kirsher
2015-09-30 12:52 ` [net-next 01/17] i40evf: missing rtnl_unlock in i40evf_resume() Jeff Kirsher
2015-09-30 12:52 ` [net-next 02/17] i40e: rtnl_lock called twice in i40e_pci_error_resume() Jeff Kirsher
2015-09-30 12:52 ` [net-next 03/17] i40e/i40evf: fix up type clash in i40e_aq_rc_to_posix conversion Jeff Kirsher
2015-09-30 12:52 ` [net-next 04/17] i40e: Fix a port VLAN configuration bug Jeff Kirsher
2015-09-30 12:52 ` [net-next 05/17] i40e: fixup padding issue in get_cee_dcb_cfg_v1_resp Jeff Kirsher
2015-09-30 12:52 ` [net-next 06/17] i40e/i40evf: fix Tx hang workaround code Jeff Kirsher
2015-09-30 12:52 ` [net-next 07/17] i40e: count drops in netstat interface Jeff Kirsher
2015-09-30 12:52 ` [net-next 08/17] i40e: use QOS field consistently Jeff Kirsher
2015-09-30 12:52 ` Jeff Kirsher [this message]
2015-09-30 12:52 ` [net-next 10/17] i40e: Remove useless message Jeff Kirsher
2015-09-30 12:52 ` [net-next 11/17] i40e/i40evf: add new device id 1588 Jeff Kirsher
2015-09-30 12:52 ` [net-next 12/17] i40e: Strip VEB stats if they are disabled in HW Jeff Kirsher
2015-09-30 12:52 ` [net-next 13/17] i40e: refactor interrupt enable Jeff Kirsher
2015-09-30 12:52 ` [net-next 14/17] i40e: warn on double free Jeff Kirsher
2015-09-30 12:52 ` [net-next 15/17] i40evf: tweak init timing Jeff Kirsher
2015-09-30 12:52 ` [net-next 16/17] i40e: fix kbuild warnings Jeff Kirsher
2015-09-30 12:52 ` [net-next 17/17] i40e: fix 32 bit build warnings Jeff Kirsher
2015-10-03 12:17 ` [net-next 00/17][pull request] Intel Wired LAN Driver Updates 2015-09-30 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443617561-40490-10-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
--cc=shannon.nelson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).