From: Nikolay Aleksandrov <razor@blackwall.org>
To: netdev@vger.kernel.org
Cc: bridge@lists.linux-foundation.org,
Nikolay Aleksandrov <nikolay@cumulusnetworks.com>,
roopa@cumulusnetworks.com, shm@cumulusnetworks.com,
davem@davemloft.net
Subject: [PATCH net-next 00/20] bridge: complete netlink support
Date: Sun, 4 Oct 2015 14:23:27 +0200 [thread overview]
Message-ID: <1443961427-15085-1-git-send-email-razor@blackwall.org> (raw)
From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Hi,
This set completes the bridge device's netlink support and makes it
possible to view and configure everything that can be configured via
sysfs. I have tested all of these (setting and getting). There're a few
longer line warnings about the br_get_size() ifla comments but I think we
should have them to know what has been accounted for. I have used the sysfs
interface as a guide of what and how to set. As usual I'll send the
corresponding iproute2 patches later.
The bridge port's netlink interface will be completed after this set gets
applied in some form.
This patch-set is on top of my last vlan cleanups set:
http://www.spinics.net/lists/netdev/msg346005.html
Cheers,
Nik
Nikolay Aleksandrov (20):
bridge: netlink: add group_fwd_mask support
bridge: netlink: export root id
bridge: netlink: export bridge id
bridge: netlink: export root port
bridge: netlink: export root path cost
bridge: netlink: export topology_change and topology_change_detected
bridge: netlink: export all timers
bridge: netlink: add group_addr support
bridge: netlink: add fdb flush
bridge: netlink: add support for multicast_router
bridge: netlink: add support for multicast_snooping
bridge: netlink: add support for multicast_query_use_ifaddr
bridge: netlink: add support for multicast_querier
bridge: netlink: add support for igmp's hash_elasticity
bridge: netlink: add support for igmp's hash_max
bridge: netlink: add support for multicast_last_member_count
bridge: netlink: add support for multicast_startup_query_count
bridge: netlink: add support for igmp's intervals
bridge: netlink: add support for netfilter tables config
bridge: netlink: add support for default_pvid
include/uapi/linux/if_link.h | 36 ++++++
net/bridge/br_netlink.c | 284 ++++++++++++++++++++++++++++++++++++++++++-
net/bridge/br_private.h | 1 +
net/bridge/br_vlan.c | 14 +--
4 files changed, 326 insertions(+), 9 deletions(-)
--
2.4.3
next reply other threads:[~2015-10-04 12:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-04 12:23 Nikolay Aleksandrov [this message]
2015-10-04 12:23 ` [PATCH net-next 01/20] bridge: netlink: add group_fwd_mask support Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 02/20] bridge: netlink: export root id Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 03/20] bridge: netlink: export bridge id Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 04/20] bridge: netlink: export root port Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 05/20] bridge: netlink: export root path cost Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 06/20] bridge: netlink: export topology_change and topology_change_detected Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 07/20] bridge: netlink: export all timers Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 08/20] bridge: netlink: add group_addr support Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 09/20] bridge: netlink: add fdb flush Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 10/20] bridge: netlink: add support for multicast_router Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 11/20] bridge: netlink: add support for multicast_snooping Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 12/20] bridge: netlink: add support for multicast_query_use_ifaddr Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 13/20] bridge: netlink: add support for multicast_querier Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 14/20] bridge: netlink: add support for igmp's hash_elasticity Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 15/20] bridge: netlink: add support for igmp's hash_max Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 16/20] bridge: netlink: add support for multicast_last_member_count Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 17/20] bridge: netlink: add support for multicast_startup_query_count Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 18/20] bridge: netlink: add support for igmp's intervals Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 19/20] bridge: netlink: add support for netfilter tables config Nikolay Aleksandrov
2015-10-04 12:23 ` [PATCH net-next 20/20] bridge: netlink: add support for default_pvid Nikolay Aleksandrov
2015-10-04 23:47 ` [PATCH net-next 00/20] bridge: complete netlink support David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443961427-15085-1-git-send-email-razor@blackwall.org \
--to=razor@blackwall.org \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nikolay@cumulusnetworks.com \
--cc=roopa@cumulusnetworks.com \
--cc=shm@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).