public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Ronen Arad <ronen.arad@intel.com>
To: netdev@vger.kernel.org
Cc: Ronen Arad <ronen.arad@intel.com>
Subject: [PATCH net-next v2] netlink: Trim skb to alloc size to avoid MSG_TRUNC
Date: Thu, 15 Oct 2015 01:55:17 -0700	[thread overview]
Message-ID: <1444899317-3345-1-git-send-email-ronen.arad@intel.com> (raw)
In-Reply-To: <1444698923-13992-1-git-send-email-ronen.arad@intel.com>

netlink_dump() allocates skb based on the calculated min_dump_alloc or
a per socket max_recvmsg_len.
min_alloc_size is maximum space required for any single netdev
attributes as calculated by rtnl_calcit().
max_recvmsg_len tracks the user provided buffer to netlink_recvmsg.
It is capped at 16KiB.
The intention is to avoid small allocations and to minimize the number
of calls required to obtain dump information for all net devices.

netlink_dump packs as many small messages as could fit within an skb
that was sized for the largest single netdev information. The actual
space available within an skb is larger than what is requested. It could
be much larger and up to near 2x with align to next power of 2 approach.

Allowing netlink_dump to use all the space available within the
allocated skb increases the buffer size a user has to provide to avoid
truncaion (i.e. MSG_TRUNG flag set).

It was observed that with many VLANs configured on at least one netdev,
a larger buffer of near 64KiB was necessary to avoid "Message truncated"
error in "ip link" or "bridge [-c[ompressvlans]] vlan show" when
min_alloc_size was only little over 32KiB.

This patch trims skb to allocated size in order to allow the user to
avoid truncation with more reasonable buffer size.

Signed-off-by: Ronen Arad <ronen.arad@intel.com>
---
 net/netlink/af_netlink.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 8f060d7..0a49a8c 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2785,6 +2785,7 @@ static int netlink_dump(struct sock *sk)
 	struct sk_buff *skb = NULL;
 	struct nlmsghdr *nlh;
 	int len, err = -ENOBUFS;
+	int alloc_min_size;
 	int alloc_size;
 
 	mutex_lock(nlk->cb_mutex);
@@ -2793,9 +2794,6 @@ static int netlink_dump(struct sock *sk)
 		goto errout_skb;
 	}
 
-	cb = &nlk->cb;
-	alloc_size = max_t(int, cb->min_dump_alloc, NLMSG_GOODSIZE);
-
 	if (!netlink_rx_is_mmaped(sk) &&
 	    atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
 		goto errout_skb;
@@ -2805,23 +2803,35 @@ static int netlink_dump(struct sock *sk)
 	 * to reduce number of system calls on dump operations, if user
 	 * ever provided a big enough buffer.
 	 */
-	if (alloc_size < nlk->max_recvmsg_len) {
-		skb = netlink_alloc_skb(sk,
-					nlk->max_recvmsg_len,
-					nlk->portid,
+	cb = &nlk->cb;
+	alloc_min_size = max_t(int, cb->min_dump_alloc, NLMSG_GOODSIZE);
+
+	if (alloc_min_size < nlk->max_recvmsg_len) {
+		alloc_size = nlk->max_recvmsg_len;
+		skb = netlink_alloc_skb(sk, alloc_size, nlk->portid,
 					GFP_KERNEL |
 					__GFP_NOWARN |
 					__GFP_NORETRY);
-		/* available room should be exact amount to avoid MSG_TRUNC */
-		if (skb)
-			skb_reserve(skb, skb_tailroom(skb) -
-					 nlk->max_recvmsg_len);
 	}
-	if (!skb)
+	if (!skb) {
+		alloc_size = alloc_min_size;
 		skb = netlink_alloc_skb(sk, alloc_size, nlk->portid,
 					GFP_KERNEL);
+	}
 	if (!skb)
 		goto errout_skb;
+
+	/* Trim skb to allocated size. User is expected to provide buffer as
+	 * large as max(min_dump_alloc, 16KiB (mac_recvmsg_len capped at
+	 * netlink_recvmsg())). dump will pack as many smaller messages as
+	 * could fit within the allocated skb. skb is typically allocated
+	 * with larger space than required (could be as much as near 2x the
+	 * requested size with align to next power of 2 approach). Allowing
+	 * dump to use the excess space makes it difficult for a user to have a
+	 * reasonable static buffer based on the expected largest dump of a
+	 * single netdev. The outcome is MSG_TRUNC error.
+	 */
+	skb_reserve(skb, skb_tailroom(skb) - alloc_size);
 	netlink_skb_set_owner_r(skb, sk);
 
 	len = cb->dump(skb, cb);
-- 
2.1.0

  parent reply	other threads:[~2015-10-15  8:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-13  1:15 [PATCH] netlink: trim skb to exact size to avoid MSG_TRUNC Ronen Arad
2015-10-13  8:56 ` Thomas Graf
2015-10-13 17:52   ` Arad, Ronen
2015-10-14  7:44     ` Thomas Graf
2015-10-15  6:41       ` Arad, Ronen
2015-10-15  8:55 ` Ronen Arad [this message]
2015-10-19  2:33   ` [PATCH net-next v2] netlink: Trim skb to alloc " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444899317-3345-1-git-send-email-ronen.arad@intel.com \
    --to=ronen.arad@intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox