netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ravi Kerur <rkerur@gmail.com>
To: netdev@vger.kernel.org
Cc: jasowang@redhat.com, mst@redhat.com, rusty@rustcorp.com.au,
	Ravi Kerur <rkerur@gmail.com>
Subject: [PATCH v1 1/3] virtio-net: Using single MSIX IRQ for TX/RX Q pair
Date: Mon, 26 Oct 2015 10:52:47 -0700	[thread overview]
Message-ID: <1445881969-24663-1-git-send-email-rkerur@gmail.com> (raw)

Ported earlier patch from Jason Wang (dated 12/26/2014).

This patch tries to reduce the number of MSIX irqs required for
virtio-net by sharing a MSIX irq for each TX/RX queue pair through
channels. If transport support channel, about half of the MSIX irqs
were reduced.

Signed-off-by: Ravi Kerur <rkerur@gmail.com>
---
 drivers/net/virtio_net.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d8838ded..d705cce 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -72,6 +72,9 @@ struct send_queue {
 
 	/* Name of the send queue: output.$index */
 	char name[40];
+
+	/* Name of the channel, shared with irq. */
+	char channel_name[40];
 };
 
 /* Internal representation of a receive virtqueue */
@@ -1529,6 +1532,8 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
 	int ret = -ENOMEM;
 	int i, total_vqs;
 	const char **names;
+	const char **channel_names;
+	unsigned *channels;
 
 	/* We expect 1 RX virtqueue followed by 1 TX virtqueue, followed by
 	 * possible N-1 RX/TX queue pairs used in multiqueue mode, followed by
@@ -1548,6 +1553,17 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
 	if (!names)
 		goto err_names;
 
+	channel_names = kmalloc_array(vi->max_queue_pairs,
+				      sizeof(*channel_names),
+				      GFP_KERNEL);
+	if (!channel_names)
+		goto err_channel_names;
+
+	channels = kmalloc_array(total_vqs, sizeof(*channels),
+				 GFP_KERNEL);
+	if (!channels)
+		goto err_channels;
+
 	/* Parameters for control virtqueue, if any */
 	if (vi->has_cvq) {
 		callbacks[total_vqs - 1] = NULL;
@@ -1562,10 +1578,15 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
 		sprintf(vi->sq[i].name, "output.%d", i);
 		names[rxq2vq(i)] = vi->rq[i].name;
 		names[txq2vq(i)] = vi->sq[i].name;
+		sprintf(vi->sq[i].channel_name, "txrx.%d", i);
+		channel_names[i] = vi->sq[i].channel_name;
+		channels[rxq2vq(i)] = i;
+		channels[txq2vq(i)] = i;
 	}
 
 	ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks,
-					 names);
+					 names, channels, channel_names,
+					 vi->max_queue_pairs);
 	if (ret)
 		goto err_find;
 
@@ -1580,6 +1601,8 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
 		vi->sq[i].vq = vqs[txq2vq(i)];
 	}
 
+	kfree(channels);
+	kfree(channel_names);
 	kfree(names);
 	kfree(callbacks);
 	kfree(vqs);
@@ -1587,6 +1610,10 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
 	return 0;
 
 err_find:
+	kfree(channels);
+err_channels:
+	kfree(channel_names);
+err_channel_names:
 	kfree(names);
 err_names:
 	kfree(callbacks);
-- 
1.9.1

             reply	other threads:[~2015-10-26 17:52 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-26 17:52 Ravi Kerur [this message]
2015-10-26 17:52 ` [PATCH v1 2/3] virtio: vp_find_vqs accept channel setting params Ravi Kerur
2015-10-26 18:12   ` kbuild test robot
2015-10-26 18:14   ` kbuild test robot
2015-10-26 17:52 ` [PATCH v1 3/3] virtio-pci: Introduce channels Ravi Kerur
2015-10-27  5:11 ` [PATCH v1 1/3] virtio-net: Using single MSIX IRQ for TX/RX Q pair Jason Wang
2015-10-27 22:13   ` Ravi Kerur
2015-10-27  8:38 ` Michael S. Tsirkin
2015-10-27 22:17   ` Ravi Kerur
2015-10-28  3:13   ` Jason Wang
2015-10-28  7:21     ` Michael S. Tsirkin
2015-10-28  7:54       ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445881969-24663-1-git-send-email-rkerur@gmail.com \
    --to=rkerur@gmail.com \
    --cc=jasowang@redhat.com \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=rusty@rustcorp.com.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).