From: Tejun Heo <tj@kernel.org>
To: davem@davemloft.net, pablo@netfilter.org, kaber@trash.net,
kadlec@blackhole.kfki.hu, lizefan@huawei.com, hannes@cmpxchg.org
Cc: netdev@vger.kernel.org, netfilter-devel@vger.kernel.org,
coreteam@netfilter.org, cgroups@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-team@fb.com,
daniel@iogearbox.net, daniel.wagner@bmw-carit.de,
nhorman@tuxdriver.com, Tejun Heo <tj@kernel.org>
Subject: [PATCH 4/7] netprio_cgroup: limit the maximum css->id to USHRT_MAX
Date: Thu, 19 Nov 2015 13:52:48 -0500 [thread overview]
Message-ID: <1447959171-20749-5-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1447959171-20749-1-git-send-email-tj@kernel.org>
netprio builds per-netdev contiguous priomap array which is indexed by
css->id. The array is allocated using kzalloc() effectively limiting
the maximum ID supported to some thousand range. This patch caps the
maximum supported css->id to USHRT_MAX which should be way above what
is actually useable.
This allows reducing sock->sk_cgrp_prioidx to u16 from u32. The freed
up part will be used to overload the cgroup related fields.
sock->sk_cgrp_prioidx's position is swapped with sk_mark so that the
two cgroup related fields are adjacent.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Wagner <daniel.wagner@bmw-carit.de>
CC: Neil Horman <nhorman@tuxdriver.com>
---
include/net/sock.h | 10 +++++-----
net/core/netprio_cgroup.c | 9 +++++++++
2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index bbf7c2c..b517351 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -288,7 +288,6 @@ struct cg_proto;
* @sk_ack_backlog: current listen backlog
* @sk_max_ack_backlog: listen backlog set in listen()
* @sk_priority: %SO_PRIORITY setting
- * @sk_cgrp_prioidx: socket group's priority map index
* @sk_type: socket type (%SOCK_STREAM, etc)
* @sk_protocol: which protocol this socket belongs in this network family
* @sk_peer_pid: &struct pid for this socket's peer
@@ -309,6 +308,7 @@ struct cg_proto;
* @sk_send_head: front of stuff to transmit
* @sk_security: used by security modules
* @sk_mark: generic packet mark
+ * @sk_cgrp_prioidx: socket group's priority map index
* @sk_classid: this socket's cgroup classid
* @sk_cgrp: this socket's cgroup-specific proto data
* @sk_write_pending: a write to stream socket waits to start
@@ -423,9 +423,7 @@ struct sock {
u32 sk_ack_backlog;
u32 sk_max_ack_backlog;
__u32 sk_priority;
-#if IS_ENABLED(CONFIG_CGROUP_NET_PRIO)
- __u32 sk_cgrp_prioidx;
-#endif
+ __u32 sk_mark;
struct pid *sk_peer_pid;
const struct cred *sk_peer_cred;
long sk_rcvtimeo;
@@ -443,7 +441,9 @@ struct sock {
#ifdef CONFIG_SECURITY
void *sk_security;
#endif
- __u32 sk_mark;
+#if IS_ENABLED(CONFIG_CGROUP_NET_PRIO)
+ u16 sk_cgrp_prioidx;
+#endif
#ifdef CONFIG_CGROUP_NET_CLASSID
u32 sk_classid;
#endif
diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c
index cbd0a19..2b9159b 100644
--- a/net/core/netprio_cgroup.c
+++ b/net/core/netprio_cgroup.c
@@ -27,6 +27,12 @@
#include <linux/fdtable.h>
+/*
+ * netprio allocates per-net_device priomap array which is indexed by
+ * css->id. Limiting css ID to 16bits doesn't lose anything.
+ */
+#define NETPRIO_ID_MAX USHRT_MAX
+
#define PRIOMAP_MIN_SZ 128
/*
@@ -144,6 +150,9 @@ static int cgrp_css_online(struct cgroup_subsys_state *css)
struct net_device *dev;
int ret = 0;
+ if (css->id > NETPRIO_ID_MAX)
+ return -ENOSPC;
+
if (!parent_css)
return 0;
--
2.5.0
next prev parent reply other threads:[~2015-11-19 18:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 18:52 [PATCHSET v2] netfilter, cgroup: implement xt_cgroup2 match Tejun Heo
2015-11-19 18:52 ` [PATCH 1/7] cgroup: record ancestor IDs and reimplement cgroup_is_descendant() using it Tejun Heo
2015-11-19 18:52 ` [PATCH 2/7] kernfs: implement kernfs_walk_and_get() Tejun Heo
2015-11-20 4:41 ` Greg Kroah-Hartman
2015-11-20 21:12 ` Tejun Heo
[not found] ` <20151120211254.GE1574-qYNAdHglDFBN0TnZuCh8vA@public.gmane.org>
2015-11-20 21:41 ` Greg Kroah-Hartman
2015-11-19 18:52 ` [PATCH 3/7] cgroup: implement cgroup_get_from_path() and expose cgroup_put() Tejun Heo
2015-11-19 18:52 ` Tejun Heo [this message]
2015-11-20 9:18 ` [PATCH 4/7] netprio_cgroup: limit the maximum css->id to USHRT_MAX Daniel Wagner
2015-11-19 18:52 ` [PATCH 5/7] net: wrap sock->sk_cgrp_prioidx and ->sk_classid inside a struct Tejun Heo
2015-11-19 18:52 ` [PATCH 6/7] sock, cgroup: add sock->sk_cgroup Tejun Heo
2015-11-20 11:04 ` Daniel Wagner
[not found] ` <564EFE25.5000906-98C5kh4wR6ohFhg+JK9F0w@public.gmane.org>
2015-11-20 19:12 ` Tejun Heo
2015-11-19 18:52 ` [PATCH 7/7] netfilter: implement xt_cgroup2 match Tejun Heo
[not found] ` <1447959171-20749-1-git-send-email-tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-11-19 18:57 ` [PATCH v2 iptables] libxt_cgroup2: add support for cgroup2 path matching Tejun Heo
2015-11-19 18:58 ` [PATCH iptables] libxt_cgroup: improve wording in the man page Tejun Heo
2015-11-20 18:59 ` [PATCHSET v2] netfilter, cgroup: implement xt_cgroup2 match David Miller
2015-11-20 19:56 ` Pablo Neira Ayuso
2015-11-20 19:57 ` Pablo Neira Ayuso
2015-11-20 21:06 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447959171-20749-5-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=cgroups@vger.kernel.org \
--cc=coreteam@netfilter.org \
--cc=daniel.wagner@bmw-carit.de \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=hannes@cmpxchg.org \
--cc=kaber@trash.net \
--cc=kadlec@blackhole.kfki.hu \
--cc=kernel-team@fb.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=pablo@netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).