[PATCH 01/13] net: mvneta: add configuration for MBUS windows access protection

[Marcin Wojtas <mw@semihalf.com>]

This commit adds missing configuration of MBUS windows access protection
in mvneta_conf_mbus_windows function - a dedicated variable for that
purpose remained there unused since v3.8 initial mvneta support. Because
of that the register contents were inherited from the bootloader.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Cc: <stable@vger.kernel.org> # v3.8+
---
 drivers/net/ethernet/marvell/mvneta.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e84c7f2..0f30aaa 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -62,6 +62,7 @@
 #define MVNETA_WIN_SIZE(w)                      (0x2204 + ((w) << 3))
 #define MVNETA_WIN_REMAP(w)                     (0x2280 + ((w) << 2))
 #define MVNETA_BASE_ADDR_ENABLE                 0x2290
+#define MVNETA_ACCESS_PROTECT_ENABLE		0x2294
 #define MVNETA_PORT_CONFIG                      0x2400
 #define      MVNETA_UNI_PROMISC_MODE            BIT(0)
 #define      MVNETA_DEF_RXQ(q)                  ((q) << 1)
@@ -3188,6 +3189,8 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp,
 
 		win_enable &= ~(1 << i);
 		win_protect |= 3 << (2 * i);
+
+		mvreg_write(pp, MVNETA_ACCESS_PROTECT_ENABLE, win_protect);
 	}
 
 	mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
-- 
1.8.3.1