From: Or Gerlitz <ogerlitz@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Don Dutile <ddutile@redhat.com>,
Doug Ledford <dledford@redhat.com>,
Saeed Mahameed <saeedm@mellanox.com>,
Tal Alon <talal@mellanox.com>,
Hadar Har-Zion <hadarh@mellanox.com>,
Rony Efraim <ronye@mellanox.com>,
Or Gerlitz <ogerlitz@mellanox.com>
Subject: [PATCH net-next V1 10/18] net/mlx5e: Write vlan list into vport context
Date: Sun, 29 Nov 2015 17:37:18 +0200 [thread overview]
Message-ID: <1448811446-18598-11-git-send-email-ogerlitz@mellanox.com> (raw)
In-Reply-To: <1448811446-18598-1-git-send-email-ogerlitz@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Each Vport/vNIC must notify underlying e-Switch layer
for vlan table changes in-order to update SR-IOV FDB tables.
We do that at vlan_rx_add_vid and vlan_rx_kill_vid ndos.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 +
.../ethernet/mellanox/mlx5/core/en_flow_table.c | 52 ++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 69f1c1a..89313d4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -465,6 +465,7 @@ enum {
};
struct mlx5e_vlan_db {
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
u32 active_vlans_ft_ix[VLAN_N_VID];
u32 untagged_rule_ft_ix;
u32 any_vlan_rule_ft_ix;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_flow_table.c b/drivers/net/ethernet/mellanox/mlx5/core/en_flow_table.c
index fb02f6c..5b93c9c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_flow_table.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_flow_table.c
@@ -502,6 +502,49 @@ add_eth_addr_rule_out:
return err;
}
+static int mlx5e_vport_context_update_vlans(struct mlx5e_priv *priv)
+{
+ struct net_device *ndev = priv->netdev;
+ int max_list_size;
+ int list_size;
+ u16 *vlans;
+ int vlan;
+ int err;
+ int i;
+
+ list_size = 0;
+ for_each_set_bit(vlan, priv->vlan.active_vlans, VLAN_N_VID)
+ list_size++;
+
+ max_list_size = 1 << MLX5_CAP_GEN(priv->mdev, log_max_vlan_list);
+
+ if (list_size > max_list_size) {
+ netdev_warn(ndev,
+ "netdev vlans list size (%d) > (%d) max vport list size, some vlans will be dropped\n",
+ list_size, max_list_size);
+ list_size = max_list_size;
+ }
+
+ vlans = kcalloc(list_size, sizeof(*vlans), GFP_KERNEL);
+ if (!vlans)
+ return -ENOMEM;
+
+ i = 0;
+ for_each_set_bit(vlan, priv->vlan.active_vlans, VLAN_N_VID) {
+ if (i >= list_size)
+ break;
+ vlans[i++] = vlan;
+ }
+
+ err = mlx5_modify_nic_vport_vlans(priv->mdev, vlans, list_size);
+ if (err)
+ netdev_err(ndev, "Failed to modify vport vlans list err(%d)\n",
+ err);
+
+ kfree(vlans);
+ return err;
+}
+
enum mlx5e_vlan_rule_type {
MLX5E_VLAN_RULE_TYPE_UNTAGGED,
MLX5E_VLAN_RULE_TYPE_ANY_VID,
@@ -552,6 +595,10 @@ static int mlx5e_add_vlan_rule(struct mlx5e_priv *priv,
1);
break;
default: /* MLX5E_VLAN_RULE_TYPE_MATCH_VID */
+ err = mlx5e_vport_context_update_vlans(priv);
+ if (err)
+ goto add_vlan_rule_out;
+
ft_ix = &priv->vlan.active_vlans_ft_ix[vid];
MLX5_SET(fte_match_param, match_value, outer_headers.vlan_tag,
1);
@@ -588,6 +635,7 @@ static void mlx5e_del_vlan_rule(struct mlx5e_priv *priv,
case MLX5E_VLAN_RULE_TYPE_MATCH_VID:
mlx5_del_flow_table_entry(priv->ft.vlan,
priv->vlan.active_vlans_ft_ix[vid]);
+ mlx5e_vport_context_update_vlans(priv);
break;
}
}
@@ -619,6 +667,8 @@ int mlx5e_vlan_rx_add_vid(struct net_device *dev, __always_unused __be16 proto,
{
struct mlx5e_priv *priv = netdev_priv(dev);
+ set_bit(vid, priv->vlan.active_vlans);
+
return mlx5e_add_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_MATCH_VID, vid);
}
@@ -627,6 +677,8 @@ int mlx5e_vlan_rx_kill_vid(struct net_device *dev, __always_unused __be16 proto,
{
struct mlx5e_priv *priv = netdev_priv(dev);
+ clear_bit(vid, priv->vlan.active_vlans);
+
mlx5e_del_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_MATCH_VID, vid);
return 0;
--
2.3.7
next prev parent reply other threads:[~2015-11-29 15:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-29 15:37 [PATCH net-next V1 00/18] Introducing ConnectX-4 Ethernet SRIOV Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 01/18] net/mlx5_core: Modify enable/disable hca functions Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 02/18] net/mlx5_core: Add base sriov support Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 03/18] net/mlx5: Add HW capabilities and structs for SR-IOV E-Switch Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 04/18] net/mlx5: Update access functions to Query/Modify vport MAC address Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 05/18] net/mlx5: Introduce access functions to modify/query vport mac lists Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 06/18] net/mlx5: Introduce access functions to modify/query vport state Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 07/18] net/mlx5: Introduce access functions to modify/query vport promisc mode Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 08/18] net/mlx5: Introduce access functions to modify/query vport vlans Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 09/18] net/mlx5e: Write UC/MC list and promisc mode into vport context Or Gerlitz
2015-11-29 15:37 ` Or Gerlitz [this message]
2015-11-29 15:37 ` [PATCH net-next V1 11/18] net/mlx5: Introducing E-Switch and l2 table Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 12/18] net/mlx5: E-Switch, Introduce FDB hardware capabilities Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 13/18] net/mlx5: E-Switch, Add SR-IOV (FDB) support Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 14/18] net/mlx5: E-Switch, Introduce Vport administration functions Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 15/18] net/mlx5: E-Switch, Introduce HCA cap and E-Switch vport context Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 16/18] net/mlx5: E-Switch, Introduce set vport vlan (VST mode) Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 17/18] net/mlx5: E-Switch, Introduce get vf statistics Or Gerlitz
2015-11-29 15:37 ` [PATCH net-next V1 18/18] net/mlx5e: Add support for SR-IOV ndos Or Gerlitz
2015-11-29 16:35 ` kbuild test robot
2015-11-29 16:35 ` [PATCH] net/mlx5e: fix semicolon.cocci warnings kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448811446-18598-11-git-send-email-ogerlitz@mellanox.com \
--to=ogerlitz@mellanox.com \
--cc=davem@davemloft.net \
--cc=ddutile@redhat.com \
--cc=dledford@redhat.com \
--cc=hadarh@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=ronye@mellanox.com \
--cc=saeedm@mellanox.com \
--cc=talal@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox