From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, john.ronciak@intel.com
Subject: [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2015-12-03
Date: Thu, 3 Dec 2015 05:25:45 -0800 [thread overview]
Message-ID: <1449149160-105219-1-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
This series contains updates to i40e and i40evf only.
Mitch updates the i40evf driver by increasing the maximum number of queues,
since future devices will allow for more queue pairs. Cleans up a
duplicate printing of the driver info string done in init, since it is
already done in probe. Cleaned up the several allocations which did
not need to be at atomic level, where GFP_KERNEL would work just fine.
Then makes i40e_sync_vsi_filters() a more mature function, make having
a common exit point so it will properly release the busy lock on the VSI
and propagate errors to the callers. Then does some whitespace
housekeeping in i40evf.
Kiran moves and updates the detection/recovery of transmit queue hang code
to service_task from tx_timeout function. Also fixed memory leak when
users program flow-director filter using ethtool (sideband filter
programming), the cause being the check of 'tx_buffer->skb' was preventing
'raw_buf' from being freed as part of the cleanup.
Jesse enabled the ability to turn off/on packet split using ethtool priv
flags. Then does some housekeeping for both the i40e and i40evf drivers
which includes: remove unused/useless code, correct whitespace, remove
duplicate #include, fix incorrect comment, etc...
Neerav cleans up functions to gather Flow Control Rx XOFF stats, since
the recent change in the driver logic for checking transmit hang has been
moved, so these functions do not do anything meaningful any longer.
The following are changes since commit 6f24e5d599896b5091af72e4b3edfce6307627f7:
sfc: use ALIGN macro for aligning frame sizes
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 40GbE
Catherine Sullivan (1):
i40e/i40evf: Bump version to 1.4.7 for i40e and 1.4.3 for i40evf
Jesse Brandeburg (3):
i40e: use priv flags to control packet split
i40e: remove CONFIG_I40E_VXLAN
i40e: trivial fixes
Kiran Patil (2):
i40e: Detection and recovery of TX queue hung logic moved to
service_task from tx_timeout
i40e: Fix memory leaks, sideband filter programming
Mitch Williams (8):
i40evf: increase max number of queues
i40evf: set real num queues
i40evf: remove duplicate string
i40evf: don't use atomic allocation
i40e: propagate properly
i40evf: use correct types
i40e: fix whitespace
i40e/i40evf: use logical operator
Neerav Parikh (1):
i40e: Remove separate functions gathering XOFF Rx stats
drivers/net/ethernet/intel/Kconfig | 11 -
drivers/net/ethernet/intel/i40e/i40e.h | 15 +-
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 27 +++
drivers/net/ethernet/intel/i40e/i40e_main.c | 240 ++++++++++-----------
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 29 ++-
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 18 +-
drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 48 ++---
drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 15 ++
drivers/net/ethernet/intel/i40evf/i40evf.h | 3 +-
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 11 +-
.../net/ethernet/intel/i40evf/i40evf_virtchnl.c | 12 +-
11 files changed, 226 insertions(+), 203 deletions(-)
--
2.5.0
next reply other threads:[~2015-12-03 13:26 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-03 13:25 Jeff Kirsher [this message]
2015-12-03 13:25 ` [net-next 01/15] i40evf: increase max number of queues Jeff Kirsher
2015-12-03 13:25 ` [net-next 02/15] i40evf: set real num queues Jeff Kirsher
2015-12-03 13:25 ` [net-next 03/15] i40evf: remove duplicate string Jeff Kirsher
2015-12-03 13:25 ` [net-next 04/15] i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout Jeff Kirsher
2015-12-03 13:25 ` [net-next 05/15] i40e: Fix memory leaks, sideband filter programming Jeff Kirsher
2015-12-03 13:25 ` [net-next 06/15] i40evf: don't use atomic allocation Jeff Kirsher
2015-12-03 13:25 ` [net-next 07/15] i40e: propagate properly Jeff Kirsher
2015-12-03 13:25 ` [net-next 08/15] i40evf: use correct types Jeff Kirsher
2015-12-03 13:25 ` [net-next 09/15] i40e: use priv flags to control packet split Jeff Kirsher
2015-12-05 21:25 ` Or Gerlitz
2015-12-08 23:24 ` Jesse Brandeburg
2015-12-08 23:33 ` Or Gerlitz
2015-12-03 13:25 ` [net-next 10/15] i40e: remove CONFIG_I40E_VXLAN Jeff Kirsher
2015-12-03 13:25 ` [net-next 11/15] i40e: Remove separate functions gathering XOFF Rx stats Jeff Kirsher
2015-12-03 13:25 ` [net-next 12/15] i40e: fix whitespace Jeff Kirsher
2015-12-03 13:25 ` [net-next 13/15] i40e/i40evf: use logical operator Jeff Kirsher
2015-12-03 13:25 ` [net-next 14/15] i40e/i40evf: Bump version to 1.4.7 for i40e and 1.4.3 for i40evf Jeff Kirsher
2015-12-03 13:26 ` [net-next 15/15] i40e: trivial fixes Jeff Kirsher
2015-12-03 17:11 ` [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2015-12-03 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449149160-105219-1-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=john.ronciak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).