netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jesse Gross <jesse@kernel.org>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Subject: [PATCH net] tunnels: Allow IPv6 UDP checksums to be correctly controlled.
Date: Wed, 20 Jan 2016 16:22:47 -0800	[thread overview]
Message-ID: <1453335767-49234-1-git-send-email-jesse@kernel.org> (raw)

When configuring checksums on UDP tunnels, the flags are different
for IPv4 vs. IPv6 (and reversed). However, when lightweight tunnels
are enabled the flags used are always the IPv4 versions, which are
ignored in the IPv6 code paths. This uses the correct IPv6 flags, so
checksums can be controlled appropriately.

Fixes: a725e514 ("vxlan: metadata based tunneling for IPv6")
Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink")
Signed-off-by: Jesse Gross <jesse@kernel.org>
---
 drivers/net/geneve.c |  4 ++--
 drivers/net/vxlan.c  | 23 ++++++++++++++++-------
 2 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index 7456569..0b14ac3 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -980,9 +980,9 @@ static netdev_tx_t geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 			opts = ip_tunnel_info_opts(info);
 
 		if (key->tun_flags & TUNNEL_CSUM)
-			flags |= GENEVE_F_UDP_CSUM;
+			flags &= ~GENEVE_F_UDP_ZERO_CSUM6_TX;
 		else
-			flags &= ~GENEVE_F_UDP_CSUM;
+			flags |= GENEVE_F_UDP_ZERO_CSUM6_TX;
 
 		err = geneve6_build_skb(dst, skb, key->tun_flags, vni,
 					info->options_len, opts,
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 2d88c79..a85b1fc 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1985,11 +1985,6 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 				     vxlan->cfg.port_max, true);
 
 	if (info) {
-		if (info->key.tun_flags & TUNNEL_CSUM)
-			flags |= VXLAN_F_UDP_CSUM;
-		else
-			flags &= ~VXLAN_F_UDP_CSUM;
-
 		ttl = info->key.ttl;
 		tos = info->key.tos;
 
@@ -2004,8 +1999,15 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 			goto drop;
 		sk = vxlan->vn4_sock->sock->sk;
 
-		if (info && (info->key.tun_flags & TUNNEL_DONT_FRAGMENT))
-			df = htons(IP_DF);
+		if (info) {
+			if (info->key.tun_flags & TUNNEL_DONT_FRAGMENT)
+				df = htons(IP_DF);
+
+			if (info->key.tun_flags & TUNNEL_CSUM)
+				flags |= VXLAN_F_UDP_CSUM;
+			else
+				flags &= ~VXLAN_F_UDP_CSUM;
+		}
 
 		memset(&fl4, 0, sizeof(fl4));
 		fl4.flowi4_oif = rdst ? rdst->remote_ifindex : 0;
@@ -2101,6 +2103,13 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 			return;
 		}
 
+		if (info) {
+			if (info->key.tun_flags & TUNNEL_CSUM)
+				flags &= ~VXLAN_F_UDP_ZERO_CSUM6_TX;
+			else
+				flags |= VXLAN_F_UDP_ZERO_CSUM6_TX;
+		}
+
 		ttl = ttl ? : ip6_dst_hoplimit(ndst);
 		err = vxlan6_xmit_skb(ndst, sk, skb, dev, &saddr, &dst->sin6.sin6_addr,
 				      0, ttl, src_port, dst_port, htonl(vni << 8), md,
-- 
2.5.0

             reply	other threads:[~2016-01-21  0:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-21  0:22 Jesse Gross [this message]
2016-01-21 14:57 ` [PATCH net] tunnels: Allow IPv6 UDP checksums to be correctly controlled Jiri Benc
2016-01-21 19:13   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453335767-49234-1-git-send-email-jesse@kernel.org \
    --to=jesse@kernel.org \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).