From: "Rafał Miłecki" <zajec5@gmail.com>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: "Hauke Mehrtens" <hauke@hauke-m.de>,
"Felix Fietkau" <nbd@openwrt.org>,
"Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH] bgmac: add helper checking for BCM4707 / BCM53018 chip id
Date: Sat, 30 Jan 2016 00:41:07 +0100 [thread overview]
Message-ID: <1454110867-9489-1-git-send-email-zajec5@gmail.com> (raw)
Chipsets with BCM4707 / BCM53018 ID require special handling at a few
places in the code. It's likely there will be more IDs to check in the
future. To simplify it add this trivial helper.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/ethernet/broadcom/bgmac.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 06f6cff..230f8e6 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -26,6 +26,17 @@ static const struct bcma_device_id bgmac_bcma_tbl[] = {
};
MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
+static inline bool bgmac_is_bcm4707_family(struct bgmac *bgmac)
+{
+ switch (bgmac->core->bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4707:
+ case BCMA_CHIP_ID_BCM53018:
+ return true;
+ default:
+ return false;
+ }
+}
+
static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask,
u32 value, int timeout)
{
@@ -987,11 +998,9 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
static void bgmac_miiconfig(struct bgmac *bgmac)
{
struct bcma_device *core = bgmac->core;
- struct bcma_chipinfo *ci = &core->bus->chipinfo;
u8 imode;
- if (ci->id == BCMA_CHIP_ID_BCM4707 ||
- ci->id == BCMA_CHIP_ID_BCM53018) {
+ if (bgmac_is_bcm4707_family(bgmac)) {
bcma_awrite32(core, BCMA_IOCTL,
bcma_aread32(core, BCMA_IOCTL) | 0x40 |
BGMAC_BCMA_IOCTL_SW_CLKEN);
@@ -1055,9 +1064,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
}
/* Request Misc PLL for corerev > 2 */
- if (core->id.rev > 2 &&
- ci->id != BCMA_CHIP_ID_BCM4707 &&
- ci->id != BCMA_CHIP_ID_BCM53018) {
+ if (core->id.rev > 2 && !bgmac_is_bcm4707_family(bgmac)) {
bgmac_set(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
@@ -1193,8 +1200,7 @@ static void bgmac_enable(struct bgmac *bgmac)
break;
}
- if (ci->id != BCMA_CHIP_ID_BCM4707 &&
- ci->id != BCMA_CHIP_ID_BCM53018) {
+ if (!bgmac_is_bcm4707_family(bgmac)) {
rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
@@ -1472,14 +1478,12 @@ static int bgmac_fixed_phy_register(struct bgmac *bgmac)
static int bgmac_mii_register(struct bgmac *bgmac)
{
- struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
struct mii_bus *mii_bus;
struct phy_device *phy_dev;
char bus_id[MII_BUS_ID_SIZE + 3];
int err = 0;
- if (ci->id == BCMA_CHIP_ID_BCM4707 ||
- ci->id == BCMA_CHIP_ID_BCM53018)
+ if (bgmac_is_bcm4707_family(bgmac))
return bgmac_fixed_phy_register(bgmac);
mii_bus = mdiobus_alloc();
@@ -1539,7 +1543,6 @@ static void bgmac_mii_unregister(struct bgmac *bgmac)
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
static int bgmac_probe(struct bcma_device *core)
{
- struct bcma_chipinfo *ci = &core->bus->chipinfo;
struct net_device *net_dev;
struct bgmac *bgmac;
struct ssb_sprom *sprom = &core->bus->sprom;
@@ -1620,8 +1623,7 @@ static int bgmac_probe(struct bcma_device *core)
bgmac_chip_reset(bgmac);
/* For Northstar, we have to take all GMAC core out of reset */
- if (ci->id == BCMA_CHIP_ID_BCM4707 ||
- ci->id == BCMA_CHIP_ID_BCM53018) {
+ if (bgmac_is_bcm4707_family(bgmac)) {
struct bcma_device *ns_core;
int ns_gmac;
--
1.8.4.5
next reply other threads:[~2016-01-29 23:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-29 23:41 Rafał Miłecki [this message]
2016-01-30 7:03 ` [PATCH] bgmac: add helper checking for BCM4707 / BCM53018 chip id David Miller
2016-01-30 9:49 ` Rafał Miłecki
-- strict thread matches above, loose matches on Subject: below --
2016-02-02 6:47 Rafał Miłecki
2016-02-06 8:37 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454110867-9489-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=davem@davemloft.net \
--cc=hauke@hauke-m.de \
--cc=nbd@openwrt.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).