[PATCH net-next v2] be2net: don't report EVB for older chipsets when SR-IOV is disabled

[Ivan Vecera <ivecera@redhat.com>]

The EVB (virtual bridge) functionality should be disabled on older BE3
and Lancer chips if SR-IOV is disabled in the NIC's BIOS. This setting
is identified by the zero value of total VFs reported by the card.
The GET_HSW_CONFIG command cannot be used as it is not supported by
these older chipset's FW.

v2: added the comment

Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 9c1fc9d..10a0ad5 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4588,6 +4588,9 @@ static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 
 	/* BE and Lancer chips support VEB mode only */
 	if (BEx_chip(adapter) || lancer_chip(adapter)) {
+		/* VEB is disabled in non-SR-IOV profiles on BE3/Lancer */
+		if (!pci_sriov_get_totalvfs(adapter->pdev))
+			return 0;
 		hsw_mode = PORT_FWD_TYPE_VEB;
 	} else {
 		status = be_cmd_get_hsw_config(adapter, NULL, 0,
-- 
2.4.10