From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Shannon Nelson <shannon.nelson@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 02/16] i40e: AQ Add set_switch_config
Date: Tue, 16 Feb 2016 21:34:08 -0800 [thread overview]
Message-ID: <1455687262-20453-3-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1455687262-20453-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Shannon Nelson <shannon.nelson@intel.com>
Add the new Set Switch Config AdminQ command, and mark the L2 Filter
bit as deprecated in the Add VEB command.
Change-ID: I5b24790f14c56f0ddf3f70df1e486844146b039f
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Kevin Scott <kevin.c.scott@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 15 ++++++++++++++-
drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 15 ++++++++++++++-
2 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 6e0834e..7e96615 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -145,6 +145,7 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_remove_statistics = 0x0202,
i40e_aqc_opc_set_port_parameters = 0x0203,
i40e_aqc_opc_get_switch_resource_alloc = 0x0204,
+ i40e_aqc_opc_set_switch_config = 0x0205,
i40e_aqc_opc_add_vsi = 0x0210,
i40e_aqc_opc_update_vsi_parameters = 0x0211,
@@ -683,6 +684,17 @@ struct i40e_aqc_switch_resource_alloc_element_resp {
I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_resource_alloc_element_resp);
+/* Set Switch Configuration (direct 0x0205) */
+struct i40e_aqc_set_switch_config {
+ __le16 flags;
+#define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001
+#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002
+ __le16 valid_flags;
+ u8 reserved[12];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
+
/* Add VSI (indirect 0x0210)
* this indirect command uses struct i40e_aqc_vsi_properties_data
* as the indirect buffer (128 bytes)
@@ -909,7 +921,8 @@ struct i40e_aqc_add_veb {
I40E_AQC_ADD_VEB_PORT_TYPE_SHIFT)
#define I40E_AQC_ADD_VEB_PORT_TYPE_DEFAULT 0x2
#define I40E_AQC_ADD_VEB_PORT_TYPE_DATA 0x4
-#define I40E_AQC_ADD_VEB_ENABLE_L2_FILTER 0x8
+#define I40E_AQC_ADD_VEB_ENABLE_L2_FILTER 0x8 /* deprecated */
+#define I40E_AQC_ADD_VEB_ENABLE_DISABLE_STATS 0x10
u8 enable_tcs;
u8 reserved[9];
};
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index 220b972..2c8f3ed 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -145,6 +145,7 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_remove_statistics = 0x0202,
i40e_aqc_opc_set_port_parameters = 0x0203,
i40e_aqc_opc_get_switch_resource_alloc = 0x0204,
+ i40e_aqc_opc_set_switch_config = 0x0205,
i40e_aqc_opc_add_vsi = 0x0210,
i40e_aqc_opc_update_vsi_parameters = 0x0211,
@@ -680,6 +681,17 @@ struct i40e_aqc_switch_resource_alloc_element_resp {
I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_resource_alloc_element_resp);
+/* Set Switch Configuration (direct 0x0205) */
+struct i40e_aqc_set_switch_config {
+ __le16 flags;
+#define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001
+#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002
+ __le16 valid_flags;
+ u8 reserved[12];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
+
/* Add VSI (indirect 0x0210)
* this indirect command uses struct i40e_aqc_vsi_properties_data
* as the indirect buffer (128 bytes)
@@ -906,7 +918,8 @@ struct i40e_aqc_add_veb {
I40E_AQC_ADD_VEB_PORT_TYPE_SHIFT)
#define I40E_AQC_ADD_VEB_PORT_TYPE_DEFAULT 0x2
#define I40E_AQC_ADD_VEB_PORT_TYPE_DATA 0x4
-#define I40E_AQC_ADD_VEB_ENABLE_L2_FILTER 0x8
+#define I40E_AQC_ADD_VEB_ENABLE_L2_FILTER 0x8 /* deprecated */
+#define I40E_AQC_ADD_VEB_ENABLE_DISABLE_STATS 0x10
u8 enable_tcs;
u8 reserved[9];
};
--
2.5.0
next prev parent reply other threads:[~2016-02-17 5:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 5:34 [net-next 00/16][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-16 Jeff Kirsher
2016-02-17 5:34 ` [net-next 01/16] i40e: AQ Shared resource flags Jeff Kirsher
2016-02-17 5:34 ` Jeff Kirsher [this message]
2016-02-17 5:34 ` [net-next 03/16] i40e: AQ Add VXLAN-GPE tunnel type Jeff Kirsher
2016-02-17 5:34 ` [net-next 04/16] i40e: AQ thermal sensor control struct Jeff Kirsher
2016-02-17 5:34 ` [net-next 05/16] i40e: Bump AQ minor version to 1.5 for new FW features Jeff Kirsher
2016-02-17 5:34 ` [net-next 06/16] i40e: Store lan_vsi_idx and lan_vsi_id in the right size Jeff Kirsher
2016-02-17 5:34 ` [net-next 07/16] i40e: fix write-back-on-itr to work with legacy itr Jeff Kirsher
2016-02-17 5:34 ` [net-next 08/16] i40e: add counter for arq overflows Jeff Kirsher
2016-02-17 5:34 ` [net-next 09/16] i40e: add 20G speed for Tx bandwidth calculations Jeff Kirsher
2016-02-17 5:34 ` [net-next 10/16] i40e: refactor DCB function Jeff Kirsher
2016-02-17 5:34 ` [net-next 11/16] i40e: add a little more to an NVM update debug message Jeff Kirsher
2016-02-17 5:34 ` [net-next 12/16] i40evf: enable bus master after reset Jeff Kirsher
2016-02-17 5:34 ` [net-next 13/16] i40e: add netdev info to VSI dump Jeff Kirsher
2016-02-17 5:34 ` [net-next 14/16] i40e: remove VF device IDs from PF Jeff Kirsher
2016-02-17 5:34 ` [net-next 15/16] i40e: trivial: remove unnecessary local var Jeff Kirsher
2016-02-17 5:34 ` [net-next 16/16] i40e/i40evf: Bump i40e to 1.4.11 and i40evf to 1.4.7 Jeff Kirsher
2016-02-17 14:49 ` [net-next 00/16][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-16 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455687262-20453-3-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
--cc=shannon.nelson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).