From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, john.ronciak@intel.com
Subject: [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-17
Date: Thu, 18 Feb 2016 01:03:57 -0800 [thread overview]
Message-ID: <1455786252-71881-1-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
This series contains updates to i40e/i40evf once again.
Mitch updates the use of a define instead of a magic number. Adds support
for packet split receive on VFs, which is disabled by default. Expands on
a code comment which was not verbose or really helpful. Fixes an issue
where if a reset fails to complete and was not properly setting the
adapter state, which would cause a panic on rmmod, so set the adpater
state to DOWN to avoid a panic.
Jesse cleans up a "dump" in debugfs that never panned out to be useful.
Anjali adds a workaround for cases where we might have interrupts that get
lost but wright-back (WB) happened. Fixes an issue by falling back to
enabling unicast, multicast and broadcast promiscuous mode when the driver
must disable it's use of "default port" (defport mode) due to internal
incompatibility with Multiple Function per Port (MFP). Fixes an issue
where queues should never be enabled/disabled in the interrupt handler.
Kiran cleans up th code which used hard coded base VEB SEID since it was
removed from the specification.
Shannon adds a few bits for better debug messages. Fixes an obscure corner
case, where it was possible to clear the NVM update wait flag when no
update_done message was actually received.
The following are changes since commit 5270c4dade091681313141a75f8401c61b72e82c:
Merge branch 'vxlan-cleanups'
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 40GbE
Anjali Singhai Jain (4):
i40e: Add a SW workaround for lost interrupts
i40e: Fix PROMISC mode for Multi-function per port (MFP) devices
i40e: Do not disable queues in the Legacy/MSI Interrupt handler
i40e: When in promisc mode apply promisc mode to Tx Traffic as well
Catherine Sullivan (1):
i40e/i40evf: Bump i40e to 1.4.15 and i40evf to 1.4.11.
Jesse Brandeburg (2):
i40e: drop unused debugfs file "dump"
i40e: trivial: cleanup use of pf->hw
Kiran Patil (1):
i40e: Removal of code which relies on BASE VEB SEID
Mitch Williams (5):
i40e: get rid of magic number
i40evf: support packet split receive
i40e/i40evf: avoid atomics
i40e: expand comment
i40evf: set adapter state on reset failure
Shannon Nelson (2):
i40e: better error reporting for nvmupdate
i40e: clean event descriptor before use
drivers/net/ethernet/intel/i40e/i40e.h | 4 +-
drivers/net/ethernet/intel/i40e/i40e_adminq.c | 20 +-
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 3 +-
drivers/net/ethernet/intel/i40e/i40e_common.c | 9 +-
drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 266 +--------------------
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 40 ++--
drivers/net/ethernet/intel/i40e/i40e_main.c | 69 +++---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 44 ++--
drivers/net/ethernet/intel/i40e/i40e_txrx.h | 3 +-
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +-
drivers/net/ethernet/intel/i40evf/i40e_adminq.c | 5 +-
.../net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 3 +-
drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 31 ++-
drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 3 +-
drivers/net/ethernet/intel/i40evf/i40evf.h | 6 +-
drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 67 +++++-
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 67 +++---
.../net/ethernet/intel/i40evf/i40evf_virtchnl.c | 4 +
18 files changed, 253 insertions(+), 399 deletions(-)
--
2.5.0
next reply other threads:[~2016-02-18 9:04 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-18 9:03 Jeff Kirsher [this message]
2016-02-18 9:03 ` [net-next 01/15] i40e: get rid of magic number Jeff Kirsher
2016-02-18 9:03 ` [net-next 02/15] i40e: drop unused debugfs file "dump" Jeff Kirsher
2016-02-18 9:04 ` [net-next 03/15] i40evf: support packet split receive Jeff Kirsher
2016-02-18 9:04 ` [net-next 04/15] i40e: trivial: cleanup use of pf->hw Jeff Kirsher
2016-02-18 9:04 ` [net-next 05/15] i40e: Add a SW workaround for lost interrupts Jeff Kirsher
2016-02-18 9:04 ` [net-next 06/15] i40e: Fix PROMISC mode for Multi-function per port (MFP) devices Jeff Kirsher
2016-02-18 9:04 ` [net-next 07/15] i40e: Removal of code which relies on BASE VEB SEID Jeff Kirsher
2016-02-18 9:04 ` [net-next 08/15] i40e/i40evf: avoid atomics Jeff Kirsher
2016-02-18 9:04 ` [net-next 09/15] i40e: Do not disable queues in the Legacy/MSI Interrupt handler Jeff Kirsher
2016-02-18 9:04 ` [net-next 10/15] i40e: expand comment Jeff Kirsher
2016-02-18 9:04 ` [net-next 11/15] i40e: better error reporting for nvmupdate Jeff Kirsher
2016-02-18 9:04 ` [net-next 12/15] i40evf: set adapter state on reset failure Jeff Kirsher
2016-02-18 9:04 ` [net-next 13/15] i40e: clean event descriptor before use Jeff Kirsher
2016-02-18 9:04 ` [net-next 14/15] i40e: When in promisc mode apply promisc mode to Tx Traffic as well Jeff Kirsher
2016-02-18 9:04 ` [net-next 15/15] i40e/i40evf: Bump i40e to 1.4.15 and i40evf to 1.4.11 Jeff Kirsher
2016-02-18 15:33 ` [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-17 David Miller
-- strict thread matches above, loose matches on Subject: below --
2016-02-18 3:38 Jeff Kirsher
2016-02-18 4:47 ` David Miller
2016-02-17 17:51 Jeff Kirsher
2016-02-17 20:24 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455786252-71881-1-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=john.ronciak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).