[net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-17

[net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-17

[Jeff Kirsher]

This series contains updates to i40e/i40evf once again.

Mitch updates the use of a define instead of a magic number.  Adds support
for packet split receive on VFs, which is disabled by default.  Expands on
a code comment which was not verbose or really helpful.  Fixes an issue
where if a reset fails to complete and was not properly setting the
adapter state, which would cause a panic on rmmod, so set the adpater
state to DOWN to avoid a panic.

Jesse cleans up a "dump" in debugfs that never panned out to be useful.

Anjali adds a workaround for cases where we might have interrupts that get
lost but wright-back (WB) happened.  Fixes an issue by falling back to
enabling unicast, multicast and broadcast promiscuous mode when the driver
must disable it's use of "default port" (defport mode) due to internal
incompatibility with Multiple Function per Port (MFP).  Fixes an issue
where queues should never be enabled/disabled in the interrupt handler.

Kiran cleans up th code which used hard coded base VEB SEID since it was
removed from the specification.

Shannon adds a few bits for better debug messages.  Fixes an obscure corner
case, where it was possible to clear the NVM update wait flag when no
update_done message was actually received.

The following are changes since commit 5270c4dade091681313141a75f8401c61b72e82c:
  Merge branch 'vxlan-cleanups'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 40GbE

Anjali Singhai Jain (4):
  i40e: Add a SW workaround for lost interrupts
  i40e: Fix PROMISC mode for Multi-function per port (MFP) devices
  i40e: Do not disable queues in the Legacy/MSI Interrupt handler
  i40e: When in promisc mode apply promisc mode to Tx Traffic as well

Catherine Sullivan (1):
  i40e/i40evf: Bump i40e to 1.4.15 and i40evf to 1.4.11.

Jesse Brandeburg (2):
  i40e: drop unused debugfs file "dump"
  i40e: trivial: cleanup use of pf->hw

Kiran Patil (1):
  i40e: Removal of code which relies on BASE VEB SEID

Mitch Williams (5):
  i40e: get rid of magic number
  i40evf: support packet split receive
  i40e/i40evf: avoid atomics
  i40e: expand comment
  i40evf: set adapter state on reset failure

Shannon Nelson (2):
  i40e: better error reporting for nvmupdate
  i40e: clean event descriptor before use

 drivers/net/ethernet/intel/i40e/i40e.h             |   4 +-
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      |  20 +-
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h  |   3 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c      |   9 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     | 266 +--------------------
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  40 ++--
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  69 +++---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  44 ++--
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |   3 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |   8 +-
 drivers/net/ethernet/intel/i40evf/i40e_adminq.c    |   5 +-
 .../net/ethernet/intel/i40evf/i40e_adminq_cmd.h    |   3 +-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      |  31 ++-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      |   3 +-
 drivers/net/ethernet/intel/i40evf/i40evf.h         |   6 +-
 drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c |  67 +++++-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |  67 +++---
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |   4 +
 18 files changed, 253 insertions(+), 399 deletions(-)

-- 
2.5.0

[net-next 01/15] i40e: get rid of magic number

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

We have a define for this, use it. No functional change.

Change-ID: Ic0e3ea4f562e46de63b2a8de07f291ccc10205fd
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 3e0d87e..597f209 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -461,7 +461,7 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
 		rx_ctx.hbuff = info->hdr_size >> I40E_RXQ_CTX_HBUFF_SHIFT;
 
 		/* set splitalways mode 10b */
-		rx_ctx.dtype = 0x2;
+		rx_ctx.dtype = I40E_RX_DTYPE_HEADER_SPLIT;
 	}
 
 	/* databuffer length validation */
-- 
2.5.0

[net-next 02/15] i40e: drop unused debugfs file "dump"

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

There was a completely unused file "dump" in debugfs that
never panned out to be useful.

Change-ID: I12bb9e37b5a83299725dda815a8746157baf6562
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 250 -------------------------
 1 file changed, 250 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 34da53b..631c2d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -72,248 +72,6 @@ static struct i40e_veb *i40e_dbg_find_veb(struct i40e_pf *pf, int seid)
 }
 
 /**************************************************************
- * dump
- * The dump entry in debugfs is for getting a data snapshow of
- * the driver's current configuration and runtime details.
- * When the filesystem entry is written, a snapshot is taken.
- * When the entry is read, the most recent snapshot data is dumped.
- **************************************************************/
-static char *i40e_dbg_dump_buf;
-static ssize_t i40e_dbg_dump_data_len;
-static ssize_t i40e_dbg_dump_buffer_len;
-
-/**
- * i40e_dbg_dump_read - read the dump data
- * @filp: the opened file
- * @buffer: where to write the data for the user to read
- * @count: the size of the user's buffer
- * @ppos: file position offset
- **/
-static ssize_t i40e_dbg_dump_read(struct file *filp, char __user *buffer,
-				  size_t count, loff_t *ppos)
-{
-	int bytes_not_copied;
-	int len;
-
-	/* is *ppos bigger than the available data? */
-	if (*ppos >= i40e_dbg_dump_data_len || !i40e_dbg_dump_buf)
-		return 0;
-
-	/* be sure to not read beyond the end of available data */
-	len = min_t(int, count, (i40e_dbg_dump_data_len - *ppos));
-
-	bytes_not_copied = copy_to_user(buffer, &i40e_dbg_dump_buf[*ppos], len);
-	if (bytes_not_copied)
-		return -EFAULT;
-
-	*ppos += len;
-	return len;
-}
-
-/**
- * i40e_dbg_prep_dump_buf
- * @pf: the PF we're working with
- * @buflen: the desired buffer length
- *
- * Return positive if success, 0 if failed
- **/
-static int i40e_dbg_prep_dump_buf(struct i40e_pf *pf, int buflen)
-{
-	/* if not already big enough, prep for re alloc */
-	if (i40e_dbg_dump_buffer_len && i40e_dbg_dump_buffer_len < buflen) {
-		kfree(i40e_dbg_dump_buf);
-		i40e_dbg_dump_buffer_len = 0;
-		i40e_dbg_dump_buf = NULL;
-	}
-
-	/* get a new buffer if needed */
-	if (!i40e_dbg_dump_buf) {
-		i40e_dbg_dump_buf = kzalloc(buflen, GFP_KERNEL);
-		if (i40e_dbg_dump_buf != NULL)
-			i40e_dbg_dump_buffer_len = buflen;
-	}
-
-	return i40e_dbg_dump_buffer_len;
-}
-
-/**
- * i40e_dbg_dump_write - trigger a datadump snapshot
- * @filp: the opened file
- * @buffer: where to find the user's data
- * @count: the length of the user's data
- * @ppos: file position offset
- *
- * Any write clears the stats
- **/
-static ssize_t i40e_dbg_dump_write(struct file *filp,
-				   const char __user *buffer,
-				   size_t count, loff_t *ppos)
-{
-	struct i40e_pf *pf = filp->private_data;
-	bool seid_found = false;
-	long seid = -1;
-	int buflen = 0;
-	int i, ret;
-	int len;
-	u8 *p;
-
-	/* don't allow partial writes */
-	if (*ppos != 0)
-		return 0;
-
-	/* decode the SEID given to be dumped */
-	ret = kstrtol_from_user(buffer, count, 0, &seid);
-
-	if (ret) {
-		dev_info(&pf->pdev->dev, "bad seid value\n");
-	} else if (seid == 0) {
-		seid_found = true;
-
-		kfree(i40e_dbg_dump_buf);
-		i40e_dbg_dump_buffer_len = 0;
-		i40e_dbg_dump_data_len = 0;
-		i40e_dbg_dump_buf = NULL;
-		dev_info(&pf->pdev->dev, "debug buffer freed\n");
-
-	} else if (seid == pf->pf_seid || seid == 1) {
-		seid_found = true;
-
-		buflen = sizeof(struct i40e_pf);
-		buflen += (sizeof(struct i40e_aq_desc)
-		     * (pf->hw.aq.num_arq_entries + pf->hw.aq.num_asq_entries));
-
-		if (i40e_dbg_prep_dump_buf(pf, buflen)) {
-			p = i40e_dbg_dump_buf;
-
-			/* avoid use of memcpy here due to sparse warning
-			 * about copy size.
-			 */
-			*((struct i40e_pf *)p) = *pf;
-			p += sizeof(struct i40e_pf);
-
-			len = (sizeof(struct i40e_aq_desc)
-					* pf->hw.aq.num_asq_entries);
-			memcpy(p, pf->hw.aq.asq.desc_buf.va, len);
-			p += len;
-
-			len = (sizeof(struct i40e_aq_desc)
-					* pf->hw.aq.num_arq_entries);
-			memcpy(p, pf->hw.aq.arq.desc_buf.va, len);
-			p += len;
-
-			i40e_dbg_dump_data_len = buflen;
-			dev_info(&pf->pdev->dev,
-				 "PF seid %ld dumped %d bytes\n",
-				 seid, (int)i40e_dbg_dump_data_len);
-		}
-	} else if (seid >= I40E_BASE_VSI_SEID) {
-		struct i40e_vsi *vsi = NULL;
-		struct i40e_mac_filter *f;
-		int filter_count = 0;
-
-		mutex_lock(&pf->switch_mutex);
-		vsi = i40e_dbg_find_vsi(pf, seid);
-		if (!vsi) {
-			mutex_unlock(&pf->switch_mutex);
-			goto write_exit;
-		}
-
-		buflen = sizeof(struct i40e_vsi);
-		buflen += sizeof(struct i40e_q_vector) * vsi->num_q_vectors;
-		buflen += sizeof(struct i40e_ring) * 2 * vsi->num_queue_pairs;
-		buflen += sizeof(struct i40e_tx_buffer) * vsi->num_queue_pairs;
-		buflen += sizeof(struct i40e_rx_buffer) * vsi->num_queue_pairs;
-		list_for_each_entry(f, &vsi->mac_filter_list, list)
-			filter_count++;
-		buflen += sizeof(struct i40e_mac_filter) * filter_count;
-
-		if (i40e_dbg_prep_dump_buf(pf, buflen)) {
-			p = i40e_dbg_dump_buf;
-			seid_found = true;
-
-			len = sizeof(struct i40e_vsi);
-			memcpy(p, vsi, len);
-			p += len;
-
-			if (vsi->num_q_vectors) {
-				len = (sizeof(struct i40e_q_vector)
-					* vsi->num_q_vectors);
-				memcpy(p, vsi->q_vectors, len);
-				p += len;
-			}
-
-			if (vsi->num_queue_pairs) {
-				len = (sizeof(struct i40e_ring) *
-				      vsi->num_queue_pairs);
-				memcpy(p, vsi->tx_rings, len);
-				p += len;
-				memcpy(p, vsi->rx_rings, len);
-				p += len;
-			}
-
-			if (vsi->tx_rings[0]) {
-				len = sizeof(struct i40e_tx_buffer);
-				for (i = 0; i < vsi->num_queue_pairs; i++) {
-					memcpy(p, vsi->tx_rings[i]->tx_bi, len);
-					p += len;
-				}
-				len = sizeof(struct i40e_rx_buffer);
-				for (i = 0; i < vsi->num_queue_pairs; i++) {
-					memcpy(p, vsi->rx_rings[i]->rx_bi, len);
-					p += len;
-				}
-			}
-
-			/* macvlan filter list */
-			len = sizeof(struct i40e_mac_filter);
-			list_for_each_entry(f, &vsi->mac_filter_list, list) {
-				memcpy(p, f, len);
-				p += len;
-			}
-
-			i40e_dbg_dump_data_len = buflen;
-			dev_info(&pf->pdev->dev,
-				 "VSI seid %ld dumped %d bytes\n",
-				 seid, (int)i40e_dbg_dump_data_len);
-		}
-		mutex_unlock(&pf->switch_mutex);
-	} else if (seid >= I40E_BASE_VEB_SEID) {
-		struct i40e_veb *veb = NULL;
-
-		mutex_lock(&pf->switch_mutex);
-		veb = i40e_dbg_find_veb(pf, seid);
-		if (!veb) {
-			mutex_unlock(&pf->switch_mutex);
-			goto write_exit;
-		}
-
-		buflen = sizeof(struct i40e_veb);
-		if (i40e_dbg_prep_dump_buf(pf, buflen)) {
-			seid_found = true;
-			memcpy(i40e_dbg_dump_buf, veb, buflen);
-			i40e_dbg_dump_data_len = buflen;
-			dev_info(&pf->pdev->dev,
-				 "VEB seid %ld dumped %d bytes\n",
-				 seid, (int)i40e_dbg_dump_data_len);
-		}
-		mutex_unlock(&pf->switch_mutex);
-	}
-
-write_exit:
-	if (!seid_found)
-		dev_info(&pf->pdev->dev, "unknown seid %ld\n", seid);
-
-	return count;
-}
-
-static const struct file_operations i40e_dbg_dump_fops = {
-	.owner = THIS_MODULE,
-	.open =  simple_open,
-	.read =  i40e_dbg_dump_read,
-	.write = i40e_dbg_dump_write,
-};
-
-/**************************************************************
  * command
  * The command entry in debugfs is for giving the driver commands
  * to be executed - these may be for changing the internal switch
@@ -2217,11 +1975,6 @@ void i40e_dbg_pf_init(struct i40e_pf *pf)
 	if (!pfile)
 		goto create_failed;
 
-	pfile = debugfs_create_file("dump", 0600, pf->i40e_dbg_pf, pf,
-				    &i40e_dbg_dump_fops);
-	if (!pfile)
-		goto create_failed;
-
 	pfile = debugfs_create_file("netdev_ops", 0600, pf->i40e_dbg_pf, pf,
 				    &i40e_dbg_netdev_ops_fops);
 	if (!pfile)
@@ -2242,9 +1995,6 @@ void i40e_dbg_pf_exit(struct i40e_pf *pf)
 {
 	debugfs_remove_recursive(pf->i40e_dbg_pf);
 	pf->i40e_dbg_pf = NULL;
-
-	kfree(i40e_dbg_dump_buf);
-	i40e_dbg_dump_buf = NULL;
 }
 
 /**
-- 
2.5.0

[net-next 03/15] i40evf: support packet split receive

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

Support packet split receive on VFs. This is off by default but can be
enabled using ethtool private flags. Because we need to trigger a reset
from outside of i40evf_main.c, create a new function to do so, and
export it.

Also update copyright year in file headers.

Change-ID: I721aa5d70113d3d6d94102e5f31526f6fc57cbbb
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h         |  6 +-
 drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 67 +++++++++++++++++++++-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    | 64 +++++++++++----------
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |  4 ++
 4 files changed, 110 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 9e15f68..e657ecc 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -274,6 +274,9 @@ struct i40evf_adapter {
 };
 
 
+/* Ethtool Private Flags */
+#define I40EVF_PRIV_FLAGS_PS		BIT(0)
+
 /* needed by i40evf_ethtool.c */
 extern char i40evf_driver_name[];
 extern const char i40evf_driver_version[];
@@ -281,6 +284,7 @@ extern const char i40evf_driver_version[];
 int i40evf_up(struct i40evf_adapter *adapter);
 void i40evf_down(struct i40evf_adapter *adapter);
 int i40evf_process_config(struct i40evf_adapter *adapter);
+void i40evf_schedule_reset(struct i40evf_adapter *adapter);
 void i40evf_reset(struct i40evf_adapter *adapter);
 void i40evf_set_ethtool_ops(struct net_device *netdev);
 void i40evf_update_stats(struct i40evf_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
index bd1c272..dd4430a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 - 2015 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -63,6 +63,12 @@ static const struct i40evf_stats i40evf_gstrings_stats[] = {
 #define I40EVF_STATS_LEN(_dev) \
 	(I40EVF_GLOBAL_STATS_LEN + I40EVF_QUEUE_STATS_LEN(_dev))
 
+static const char i40evf_priv_flags_strings[][ETH_GSTRING_LEN] = {
+	"packet-split",
+};
+
+#define I40EVF_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40evf_priv_flags_strings)
+
 /**
  * i40evf_get_settings - Get Link Speed and Duplex settings
  * @netdev: network interface device structure
@@ -97,6 +103,8 @@ static int i40evf_get_sset_count(struct net_device *netdev, int sset)
 {
 	if (sset == ETH_SS_STATS)
 		return I40EVF_STATS_LEN(netdev);
+	else if (sset == ETH_SS_PRIV_FLAGS)
+		return I40EVF_PRIV_FLAGS_STR_LEN;
 	else
 		return -EINVAL;
 }
@@ -162,6 +170,12 @@ static void i40evf_get_strings(struct net_device *netdev, u32 sset, u8 *data)
 			snprintf(p, ETH_GSTRING_LEN, "rx-%u.bytes", i);
 			p += ETH_GSTRING_LEN;
 		}
+	} else if (sset == ETH_SS_PRIV_FLAGS) {
+		for (i = 0; i < I40EVF_PRIV_FLAGS_STR_LEN; i++) {
+			memcpy(data, i40evf_priv_flags_strings[i],
+			       ETH_GSTRING_LEN);
+			data += ETH_GSTRING_LEN;
+		}
 	}
 }
 
@@ -211,6 +225,7 @@ static void i40evf_get_drvinfo(struct net_device *netdev,
 	strlcpy(drvinfo->version, i40evf_driver_version, 32);
 	strlcpy(drvinfo->fw_version, "N/A", 4);
 	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+	drvinfo->n_priv_flags = I40EVF_PRIV_FLAGS_STR_LEN;
 }
 
 /**
@@ -710,6 +725,54 @@ static int i40evf_set_rxfh(struct net_device *netdev, const u32 *indir,
 				 I40EVF_HLUT_ARRAY_SIZE);
 }
 
+/**
+ * i40evf_get_priv_flags - report device private flags
+ * @dev: network interface device structure
+ *
+ * The get string set count and the string set should be matched for each
+ * flag returned.  Add new strings for each flag to the i40e_priv_flags_strings
+ * array.
+ *
+ * Returns a u32 bitmap of flags.
+ **/
+static u32 i40evf_get_priv_flags(struct net_device *dev)
+{
+	struct i40evf_adapter *adapter = netdev_priv(dev);
+	u32 ret_flags = 0;
+
+	ret_flags |= adapter->flags & I40EVF_FLAG_RX_PS_ENABLED ?
+		I40EVF_PRIV_FLAGS_PS : 0;
+
+	return ret_flags;
+}
+
+/**
+ * i40evf_set_priv_flags - set private flags
+ * @dev: network interface device structure
+ * @flags: bit flags to be set
+ **/
+static int i40evf_set_priv_flags(struct net_device *dev, u32 flags)
+{
+	struct i40evf_adapter *adapter = netdev_priv(dev);
+	bool reset_required = false;
+
+	if ((flags & I40EVF_PRIV_FLAGS_PS) &&
+	    !(adapter->flags & I40EVF_FLAG_RX_PS_ENABLED)) {
+		adapter->flags |= I40EVF_FLAG_RX_PS_ENABLED;
+		reset_required = true;
+	} else if (!(flags & I40EVF_PRIV_FLAGS_PS) &&
+		   (adapter->flags & I40EVF_FLAG_RX_PS_ENABLED)) {
+		adapter->flags &= ~I40EVF_FLAG_RX_PS_ENABLED;
+		reset_required = true;
+	}
+
+	/* if needed, issue reset to cause things to take effect */
+	if (reset_required)
+		i40evf_schedule_reset(adapter);
+
+	return 0;
+}
+
 static const struct ethtool_ops i40evf_ethtool_ops = {
 	.get_settings		= i40evf_get_settings,
 	.get_drvinfo		= i40evf_get_drvinfo,
@@ -719,6 +782,8 @@ static const struct ethtool_ops i40evf_ethtool_ops = {
 	.get_strings		= i40evf_get_strings,
 	.get_ethtool_stats	= i40evf_get_ethtool_stats,
 	.get_sset_count		= i40evf_get_sset_count,
+	.get_priv_flags		= i40evf_get_priv_flags,
+	.set_priv_flags		= i40evf_set_priv_flags,
 	.get_msglevel		= i40evf_get_msglevel,
 	.set_msglevel		= i40evf_set_msglevel,
 	.get_coalesce		= i40evf_get_coalesce,
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1d81d57..1176326 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -173,6 +173,19 @@ void i40evf_debug_d(void *hw, u32 mask, char *fmt_str, ...)
 }
 
 /**
+ * i40evf_schedule_reset - Set the flags and schedule a reset event
+ * @adapter: board private structure
+ **/
+void i40evf_schedule_reset(struct i40evf_adapter *adapter)
+{
+	if (!(adapter->flags &
+	      (I40EVF_FLAG_RESET_PENDING | I40EVF_FLAG_RESET_NEEDED))) {
+		adapter->flags |= I40EVF_FLAG_RESET_NEEDED;
+		schedule_work(&adapter->reset_task);
+	}
+}
+
+/**
  * i40evf_tx_timeout - Respond to a Tx Hang
  * @netdev: network interface device structure
  **/
@@ -181,11 +194,7 @@ static void i40evf_tx_timeout(struct net_device *netdev)
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 
 	adapter->tx_timeout_count++;
-	if (!(adapter->flags & (I40EVF_FLAG_RESET_PENDING |
-				I40EVF_FLAG_RESET_NEEDED))) {
-		adapter->flags |= I40EVF_FLAG_RESET_NEEDED;
-		queue_work(i40evf_wq, &adapter->reset_task);
-	}
+	i40evf_schedule_reset(adapter);
 }
 
 /**
@@ -638,35 +647,22 @@ static void i40evf_configure_rx(struct i40evf_adapter *adapter)
 	int rx_buf_len;
 
 
-	adapter->flags &= ~I40EVF_FLAG_RX_PS_CAPABLE;
-	adapter->flags |= I40EVF_FLAG_RX_1BUF_CAPABLE;
-
-	/* Decide whether to use packet split mode or not */
-	if (netdev->mtu > ETH_DATA_LEN) {
-		if (adapter->flags & I40EVF_FLAG_RX_PS_CAPABLE)
-			adapter->flags |= I40EVF_FLAG_RX_PS_ENABLED;
-		else
-			adapter->flags &= ~I40EVF_FLAG_RX_PS_ENABLED;
-	} else {
-		if (adapter->flags & I40EVF_FLAG_RX_1BUF_CAPABLE)
-			adapter->flags &= ~I40EVF_FLAG_RX_PS_ENABLED;
-		else
-			adapter->flags |= I40EVF_FLAG_RX_PS_ENABLED;
-	}
-
 	/* Set the RX buffer length according to the mode */
-	if (adapter->flags & I40EVF_FLAG_RX_PS_ENABLED) {
-		rx_buf_len = I40E_RX_HDR_SIZE;
-	} else {
-		if (netdev->mtu <= ETH_DATA_LEN)
-			rx_buf_len = I40EVF_RXBUFFER_2048;
-		else
-			rx_buf_len = ALIGN(max_frame, 1024);
-	}
+	if (adapter->flags & I40EVF_FLAG_RX_PS_ENABLED ||
+	    netdev->mtu <= ETH_DATA_LEN)
+		rx_buf_len = I40EVF_RXBUFFER_2048;
+	else
+		rx_buf_len = ALIGN(max_frame, 1024);
 
 	for (i = 0; i < adapter->num_active_queues; i++) {
 		adapter->rx_rings[i].tail = hw->hw_addr + I40E_QRX_TAIL1(i);
 		adapter->rx_rings[i].rx_buf_len = rx_buf_len;
+		if (adapter->flags & I40EVF_FLAG_RX_PS_ENABLED) {
+			set_ring_ps_enabled(&adapter->rx_rings[i]);
+			adapter->rx_rings[i].rx_hdr_len = I40E_RX_HDR_SIZE;
+		} else {
+			clear_ring_ps_enabled(&adapter->rx_rings[i]);
+		}
 	}
 }
 
@@ -1003,7 +999,12 @@ static void i40evf_configure(struct i40evf_adapter *adapter)
 	for (i = 0; i < adapter->num_active_queues; i++) {
 		struct i40e_ring *ring = &adapter->rx_rings[i];
 
+	if (adapter->flags & I40EVF_FLAG_RX_PS_ENABLED) {
+		i40evf_alloc_rx_headers(ring);
+		i40evf_alloc_rx_buffers_ps(ring, ring->count);
+	} else {
 		i40evf_alloc_rx_buffers_1buf(ring, ring->count);
+	}
 		ring->next_to_use = ring->count - 1;
 		writel(ring->next_to_use, ring->tail);
 	}
@@ -2481,6 +2482,11 @@ static void i40evf_init_task(struct work_struct *work)
 	adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN;
 
 	adapter->flags |= I40EVF_FLAG_RX_CSUM_ENABLED;
+	adapter->flags |= I40EVF_FLAG_RX_1BUF_CAPABLE;
+	adapter->flags |= I40EVF_FLAG_RX_PS_CAPABLE;
+
+	/* Default to single buffer rx, can be changed through ethtool. */
+	adapter->flags &= ~I40EVF_FLAG_RX_PS_ENABLED;
 
 	netdev->netdev_ops = &i40evf_netdev_ops;
 	i40evf_set_ethtool_ops(netdev);
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index d3739cc..488e738 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -270,6 +270,10 @@ void i40evf_configure_queues(struct i40evf_adapter *adapter)
 		vqpi->rxq.max_pkt_size = adapter->netdev->mtu
 					+ ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
 		vqpi->rxq.databuffer_size = adapter->rx_rings[i].rx_buf_len;
+		if (adapter->flags & I40EVF_FLAG_RX_PS_ENABLED) {
+			vqpi->rxq.splithdr_enabled = true;
+			vqpi->rxq.hdr_size = I40E_RX_HDR_SIZE;
+		}
 		vqpi++;
 	}
 
-- 
2.5.0

[net-next 04/15] i40e: trivial: cleanup use of pf->hw

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This patch makes use of a pointer called hw consistent
in the i40e_remove function.

Change-ID: Idacc7ff0a09a68289c57457a78618bf5497de077
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 8d41c6c..161603b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11219,8 +11219,8 @@ static void i40e_remove(struct pci_dev *pdev)
 		i40e_vsi_release(pf->vsi[pf->lan_vsi]);
 
 	/* shutdown and destroy the HMC */
-	if (pf->hw.hmc.hmc_obj) {
-		ret_code = i40e_shutdown_lan_hmc(&pf->hw);
+	if (hw->hmc.hmc_obj) {
+		ret_code = i40e_shutdown_lan_hmc(hw);
 		if (ret_code)
 			dev_warn(&pdev->dev,
 				 "Failed to destroy the HMC resources: %d\n",
@@ -11228,7 +11228,7 @@ static void i40e_remove(struct pci_dev *pdev)
 	}
 
 	/* shutdown the adminq */
-	ret_code = i40e_shutdown_adminq(&pf->hw);
+	ret_code = i40e_shutdown_adminq(hw);
 	if (ret_code)
 		dev_warn(&pdev->dev,
 			 "Failed to destroy the Admin Queue resources: %d\n",
@@ -11256,7 +11256,7 @@ static void i40e_remove(struct pci_dev *pdev)
 	kfree(pf->qp_pile);
 	kfree(pf->vsi);
 
-	iounmap(pf->hw.hw_addr);
+	iounmap(hw->hw_addr);
 	kfree(pf);
 	pci_release_selected_regions(pdev,
 				     pci_select_bars(pdev, IORESOURCE_MEM));
-- 
2.5.0

[net-next 05/15] i40e: Add a SW workaround for lost interrupts

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

This patch adds a workaround for cases where we might have
interrupts that got lost but WB happened.
If that happens without this patch we will see a tx_timeout.
To work around it, this patch goes ahead and reschedules NAPI
in that situation, if NAPI is not already scheduled.
We also add a counter in ethtool to keep track of when
we detect a case of tx_lost_interrupt.

Note: napi_reschedule() can be safely called from process/service_task
context and is done in other drivers as well without an issue.

Change-ID: I00f98f1ce3774524d9421227652bef20fcbd0d20
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  1 +
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 32 ++++++++++++++++----------
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    | 10 +++++---
 drivers/net/ethernet/intel/i40e/i40e_txrx.h    |  3 ++-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c  | 10 +++++---
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h  |  3 ++-
 7 files changed, 40 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 5ea431d..5d8e159 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -512,6 +512,7 @@ struct i40e_vsi {
 	u32 tx_busy;
 	u64 tx_linearize;
 	u64 tx_force_wb;
+	u64 tx_lost_interrupt;
 	u32 rx_buf_failed;
 	u32 rx_page_failed;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 230fa40..5778f9e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -89,6 +89,7 @@ static const struct i40e_stats i40e_gstrings_misc_stats[] = {
 	I40E_VSI_STAT("rx_unknown_protocol", eth_stats.rx_unknown_protocol),
 	I40E_VSI_STAT("tx_linearize", tx_linearize),
 	I40E_VSI_STAT("tx_force_wb", tx_force_wb),
+	I40E_VSI_STAT("tx_lost_interrupt", tx_lost_interrupt),
 	I40E_VSI_STAT("rx_alloc_fail", rx_buf_failed),
 	I40E_VSI_STAT("rx_pg_alloc_fail", rx_page_failed),
 };
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 161603b..aa1c7ca 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -819,6 +819,7 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
 	struct i40e_eth_stats *oes;
 	struct i40e_eth_stats *es;     /* device's eth stats */
 	u32 tx_restart, tx_busy;
+	u64 tx_lost_interrupt;
 	struct i40e_ring *p;
 	u32 rx_page, rx_buf;
 	u64 bytes, packets;
@@ -844,6 +845,7 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
 	rx_b = rx_p = 0;
 	tx_b = tx_p = 0;
 	tx_restart = tx_busy = tx_linearize = tx_force_wb = 0;
+	tx_lost_interrupt = 0;
 	rx_page = 0;
 	rx_buf = 0;
 	rcu_read_lock();
@@ -862,6 +864,7 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
 		tx_busy += p->tx_stats.tx_busy;
 		tx_linearize += p->tx_stats.tx_linearize;
 		tx_force_wb += p->tx_stats.tx_force_wb;
+		tx_lost_interrupt += p->tx_stats.tx_lost_interrupt;
 
 		/* Rx queue is part of the same block as Tx queue */
 		p = &p[1];
@@ -880,6 +883,7 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
 	vsi->tx_busy = tx_busy;
 	vsi->tx_linearize = tx_linearize;
 	vsi->tx_force_wb = tx_force_wb;
+	vsi->tx_lost_interrupt = tx_lost_interrupt;
 	vsi->rx_page_failed = rx_page;
 	vsi->rx_buf_failed = rx_buf;
 
@@ -4349,7 +4353,7 @@ static void i40e_detect_recover_hung_queue(int q_idx, struct i40e_vsi *vsi)
 {
 	struct i40e_ring *tx_ring = NULL;
 	struct i40e_pf	*pf;
-	u32 head, val, tx_pending;
+	u32 head, val, tx_pending_hw;
 	int i;
 
 	pf = vsi->back;
@@ -4375,16 +4379,9 @@ static void i40e_detect_recover_hung_queue(int q_idx, struct i40e_vsi *vsi)
 	else
 		val = rd32(&pf->hw, I40E_PFINT_DYN_CTL0);
 
-	/* Bail out if interrupts are disabled because napi_poll
-	 * execution in-progress or will get scheduled soon.
-	 * napi_poll cleans TX and RX queues and updates 'next_to_clean'.
-	 */
-	if (!(val & I40E_PFINT_DYN_CTLN_INTENA_MASK))
-		return;
-
 	head = i40e_get_head(tx_ring);
 
-	tx_pending = i40e_get_tx_pending(tx_ring);
+	tx_pending_hw = i40e_get_tx_pending(tx_ring, false);
 
 	/* HW is done executing descriptors, updated HEAD write back,
 	 * but SW hasn't processed those descriptors. If interrupt is
@@ -4392,12 +4389,12 @@ static void i40e_detect_recover_hung_queue(int q_idx, struct i40e_vsi *vsi)
 	 * dev_watchdog detecting timeout on those netdev_queue,
 	 * hence proactively trigger SW interrupt.
 	 */
-	if (tx_pending) {
+	if (tx_pending_hw && (!(val & I40E_PFINT_DYN_CTLN_INTENA_MASK))) {
 		/* NAPI Poll didn't run and clear since it was set */
 		if (test_and_clear_bit(I40E_Q_VECTOR_HUNG_DETECT,
 				       &tx_ring->q_vector->hung_detected)) {
-			netdev_info(vsi->netdev, "VSI_seid %d, Hung TX queue %d, tx_pending: %d, NTC:0x%x, HWB: 0x%x, NTU: 0x%x, TAIL: 0x%x\n",
-				    vsi->seid, q_idx, tx_pending,
+			netdev_info(vsi->netdev, "VSI_seid %d, Hung TX queue %d, tx_pending_hw: %d, NTC:0x%x, HWB: 0x%x, NTU: 0x%x, TAIL: 0x%x\n",
+				    vsi->seid, q_idx, tx_pending_hw,
 				    tx_ring->next_to_clean, head,
 				    tx_ring->next_to_use,
 				    readl(tx_ring->tail));
@@ -4410,6 +4407,17 @@ static void i40e_detect_recover_hung_queue(int q_idx, struct i40e_vsi *vsi)
 				&tx_ring->q_vector->hung_detected);
 		}
 	}
+
+	/* This is the case where we have interrupts missing,
+	 * so the tx_pending in HW will most likely be 0, but we
+	 * will have tx_pending in SW since the WB happened but the
+	 * interrupt got lost.
+	 */
+	if ((!tx_pending_hw) && i40e_get_tx_pending(tx_ring, true) &&
+	    (!(val & I40E_PFINT_DYN_CTLN_INTENA_MASK))) {
+		if (napi_reschedule(&tx_ring->q_vector->napi))
+			tx_ring->tx_stats.tx_lost_interrupt++;
+	}
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 0ffa9a8..5b43585 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -610,15 +610,19 @@ void i40e_free_tx_resources(struct i40e_ring *tx_ring)
 /**
  * i40e_get_tx_pending - how many tx descriptors not processed
  * @tx_ring: the ring of descriptors
+ * @in_sw: is tx_pending being checked in SW or HW
  *
  * Since there is no access to the ring head register
  * in XL710, we need to use our local copies
  **/
-u32 i40e_get_tx_pending(struct i40e_ring *ring)
+u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw)
 {
 	u32 head, tail;
 
-	head = i40e_get_head(ring);
+	if (!in_sw)
+		head = i40e_get_head(ring);
+	else
+		head = ring->next_to_clean;
 	tail = readl(ring->tail);
 
 	if (head != tail)
@@ -741,7 +745,7 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 		 * them to be written back in case we stay in NAPI.
 		 * In this mode on X722 we do not enable Interrupt.
 		 */
-		j = i40e_get_tx_pending(tx_ring);
+		j = i40e_get_tx_pending(tx_ring, false);
 
 		if (budget &&
 		    ((j / (WB_STRIDE + 1)) == 0) && (j != 0) &&
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index ae22c4e..3acc924 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -203,6 +203,7 @@ struct i40e_tx_queue_stats {
 	u64 tx_done_old;
 	u64 tx_linearize;
 	u64 tx_force_wb;
+	u64 tx_lost_interrupt;
 };
 
 struct i40e_rx_queue_stats {
@@ -338,7 +339,7 @@ int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
 			       struct i40e_ring *tx_ring, u32 *flags);
 #endif
 void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector);
-u32 i40e_get_tx_pending(struct i40e_ring *ring);
+u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw);
 
 /**
  * i40e_get_head - Retrieve head from head writeback
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 76bad75..0f73a4f 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -129,15 +129,19 @@ void i40evf_free_tx_resources(struct i40e_ring *tx_ring)
 /**
  * i40evf_get_tx_pending - how many Tx descriptors not processed
  * @tx_ring: the ring of descriptors
+ * @in_sw: is tx_pending being checked in SW or HW
  *
  * Since there is no access to the ring head register
  * in XL710, we need to use our local copies
  **/
-u32 i40evf_get_tx_pending(struct i40e_ring *ring)
+u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw)
 {
 	u32 head, tail;
 
-	head = i40e_get_head(ring);
+	if (!in_sw)
+		head = i40e_get_head(ring);
+	else
+		head = ring->next_to_clean;
 	tail = readl(ring->tail);
 
 	if (head != tail)
@@ -259,7 +263,7 @@ static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
 		 * them to be written back in case we stay in NAPI.
 		 * In this mode on X722 we do not enable Interrupt.
 		 */
-		j = i40evf_get_tx_pending(tx_ring);
+		j = i40evf_get_tx_pending(tx_ring, false);
 
 		if (budget &&
 		    ((j / (WB_STRIDE + 1)) == 0) && (j > 0) &&
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 5467fcdf..81c9661 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -202,6 +202,7 @@ struct i40e_tx_queue_stats {
 	u64 tx_done_old;
 	u64 tx_linearize;
 	u64 tx_force_wb;
+	u64 tx_lost_interrupt;
 };
 
 struct i40e_rx_queue_stats {
@@ -326,7 +327,7 @@ void i40evf_free_tx_resources(struct i40e_ring *tx_ring);
 void i40evf_free_rx_resources(struct i40e_ring *rx_ring);
 int i40evf_napi_poll(struct napi_struct *napi, int budget);
 void i40evf_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector);
-u32 i40evf_get_tx_pending(struct i40e_ring *ring);
+u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw);
 
 /**
  * i40e_get_head - Retrieve head from head writeback
-- 
2.5.0

[net-next 06/15] i40e: Fix PROMISC mode for Multi-function per port (MFP) devices

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

This patch falls back to enabling unicast, multicast and
broadcast promiscuous mode when the driver must disable it's use
of "default port" aka defport mode (which is normally used to
provide a promiscuous mode), due to internal incompatibility
with Multiple Function per Port (aka MFP).

The situation that requires this patch is when Physical
Function 0 is the device being used, and it can support SR-IOV
when MFP is enabled, via the driver creating a VEB on an MFP
enabled adapter.

Change-ID: Ie90b00d0d58782a5dfcf2c3c9725a2eb90bd63d8
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index aa1c7ca..41d6d55 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2122,7 +2122,9 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 		cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
 			       test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
 					&vsi->state));
-		if (vsi->type == I40E_VSI_MAIN && pf->lan_veb != I40E_NO_VEB) {
+		if ((vsi->type == I40E_VSI_MAIN) &&
+		    (pf->lan_veb != I40E_NO_VEB) &&
+		    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
 			/* set defport ON for Main VSI instead of true promisc
 			 * this way we will get all unicast/multicast and VLAN
 			 * promisc behavior but will not get VF or VMDq traffic
-- 
2.5.0

[net-next 07/15] i40e: Removal of code which relies on BASE VEB SEID

[Jeff Kirsher]

From: Kiran Patil <kiran.patil@intel.com>

Fixed mapping of SEID is removed from specification. Hence
this patch removes code which was using hard coded base VEB SEID.

Changed FCoE code to use "hw->pf_id" to obtain correct "idx"
and verified.

Removed defines for BASE VSI/VEB SEID and BASE_PF_SEID since it
is not used anymore.

Change-ID: Id507cf4b1fae1c0145e3f08ae9ea5846ea5840de
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  3 ---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 16 +++-------------
 drivers/net/ethernet/intel/i40e/i40e_main.c    |  2 +-
 3 files changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 5d8e159..e0758dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -64,9 +64,6 @@
 #include "i40e_dcb.h"
 
 /* Useful i40e defaults */
-#define I40E_BASE_PF_SEID     16
-#define I40E_BASE_VSI_SEID    512
-#define I40E_BASE_VEB_SEID    288
 #define I40E_MAX_VEB          16
 
 #define I40E_MAX_NUM_DESCRIPTORS      4096
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 631c2d6..2a44f2e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -61,13 +61,9 @@ static struct i40e_veb *i40e_dbg_find_veb(struct i40e_pf *pf, int seid)
 {
 	int i;
 
-	if ((seid < I40E_BASE_VEB_SEID) ||
-	    (seid > (I40E_BASE_VEB_SEID + I40E_MAX_VEB)))
-		dev_info(&pf->pdev->dev, "%d: bad seid\n", seid);
-	else
-		for (i = 0; i < I40E_MAX_VEB; i++)
-			if (pf->veb[i] && pf->veb[i]->seid == seid)
-				return pf->veb[i];
+	for (i = 0; i < I40E_MAX_VEB; i++)
+		if (pf->veb[i] && pf->veb[i]->seid == seid)
+			return pf->veb[i];
 	return NULL;
 }
 
@@ -691,12 +687,6 @@ static void i40e_dbg_dump_veb_seid(struct i40e_pf *pf, int seid)
 {
 	struct i40e_veb *veb;
 
-	if ((seid < I40E_BASE_VEB_SEID) ||
-	    (seid >= (I40E_MAX_VEB + I40E_BASE_VEB_SEID))) {
-		dev_info(&pf->pdev->dev, "%d: bad seid\n", seid);
-		return;
-	}
-
 	veb = i40e_dbg_find_veb(pf, seid);
 	if (!veb) {
 		dev_info(&pf->pdev->dev, "can't find veb %d\n", seid);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 41d6d55..adb2a04 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -768,7 +768,7 @@ static void i40e_update_fcoe_stats(struct i40e_vsi *vsi)
 	if (vsi->type != I40E_VSI_FCOE)
 		return;
 
-	idx = (pf->pf_seid - I40E_BASE_PF_SEID) + I40E_FCOE_PF_STAT_OFFSET;
+	idx = hw->pf_id + I40E_FCOE_PF_STAT_OFFSET;
 	fs = &vsi->fcoe_stats;
 	ofs = &vsi->fcoe_stats_offsets;
 
-- 
2.5.0

[net-next 08/15] i40e/i40evf: avoid atomics

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

In the case where we have a page fully used by receive data, we need to
release the page fully to the stack. Instead of calling get_page (which
increments the page count) followed by free_page (which decrements the
page count), just donate our reference to the stack. Although this
donation is not tax deductible, it does allow us to avoid two very
expensive atomic operations that reverse each other.

Change-ID: If70739792d5748995fc175ec92ac2171ed4ad8fc
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 21 +++++++++++++--------
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 21 +++++++++++++--------
 2 files changed, 26 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 5b43585..25e378c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1663,28 +1663,33 @@ static int i40e_clean_rx_irq_ps(struct i40e_ring *rx_ring, const int budget)
 					rx_bi->page_offset + copysize,
 					rx_packet_len, I40E_RXBUFFER_2048);
 
-			get_page(rx_bi->page);
-			/* switch to the other half-page here; the allocation
-			 * code programs the right addr into HW. If we haven't
-			 * used this half-page, the address won't be changed,
-			 * and HW can just use it next time through.
-			 */
-			rx_bi->page_offset ^= PAGE_SIZE / 2;
 			/* If the page count is more than 2, then both halves
 			 * of the page are used and we need to free it. Do it
 			 * here instead of in the alloc code. Otherwise one
 			 * of the half-pages might be released between now and
 			 * then, and we wouldn't know which one to use.
+			 * Don't call get_page and free_page since those are
+			 * both expensive atomic operations that just change
+			 * the refcount in opposite directions. Just give the
+			 * page to the stack; he can have our refcount.
 			 */
 			if (page_count(rx_bi->page) > 2) {
 				dma_unmap_page(rx_ring->dev,
 					       rx_bi->page_dma,
 					       PAGE_SIZE,
 					       DMA_FROM_DEVICE);
-				__free_page(rx_bi->page);
 				rx_bi->page = NULL;
 				rx_bi->page_dma = 0;
 				rx_ring->rx_stats.realloc_count++;
+			} else {
+				get_page(rx_bi->page);
+				/* switch to the other half-page here; the
+				 * allocation code programs the right addr
+				 * into HW. If we haven't used this half-page,
+				 * the address won't be changed, and HW can
+				 * just use it next time through.
+				 */
+				rx_bi->page_offset ^= PAGE_SIZE / 2;
 			}
 
 		}
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 0f73a4f..fb6cd7e 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1126,28 +1126,33 @@ static int i40e_clean_rx_irq_ps(struct i40e_ring *rx_ring, const int budget)
 					rx_bi->page_offset + copysize,
 					rx_packet_len, I40E_RXBUFFER_2048);
 
-			get_page(rx_bi->page);
-			/* switch to the other half-page here; the allocation
-			 * code programs the right addr into HW. If we haven't
-			 * used this half-page, the address won't be changed,
-			 * and HW can just use it next time through.
-			 */
-			rx_bi->page_offset ^= PAGE_SIZE / 2;
 			/* If the page count is more than 2, then both halves
 			 * of the page are used and we need to free it. Do it
 			 * here instead of in the alloc code. Otherwise one
 			 * of the half-pages might be released between now and
 			 * then, and we wouldn't know which one to use.
+			 * Don't call get_page and free_page since those are
+			 * both expensive atomic operations that just change
+			 * the refcount in opposite directions. Just give the
+			 * page to the stack; he can have our refcount.
 			 */
 			if (page_count(rx_bi->page) > 2) {
 				dma_unmap_page(rx_ring->dev,
 					       rx_bi->page_dma,
 					       PAGE_SIZE,
 					       DMA_FROM_DEVICE);
-				__free_page(rx_bi->page);
 				rx_bi->page = NULL;
 				rx_bi->page_dma = 0;
 				rx_ring->rx_stats.realloc_count++;
+			} else {
+				get_page(rx_bi->page);
+				/* switch to the other half-page here; the
+				 * allocation code programs the right addr
+				 * into HW. If we haven't used this half-page,
+				 * the address won't be changed, and HW can
+				 * just use it next time through.
+				 */
+				rx_bi->page_offset ^= PAGE_SIZE / 2;
 			}
 
 		}
-- 
2.5.0

[net-next 09/15] i40e: Do not disable queues in the Legacy/MSI Interrupt handler

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

The queues should never be enabled/disabled in the interrupt handler,
ICR0 interrupt enable should be the only thing that needs to be
dynamically changed in the handler.

This patch fixes that. Without this patch X722 platforms were
seeing weird ping timings when in Legacy mode since it takes
a whole lot of time for the HW/FW to re-enable queues.

Change-ID: If065afc45d81c5a19d4a94a00cd5b8f61cefc40c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 16 ++++++----------
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 13 -------------
 2 files changed, 6 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index adb2a04..7869d74 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3462,16 +3462,12 @@ static irqreturn_t i40e_intr(int irq, void *data)
 		struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
 		struct i40e_q_vector *q_vector = vsi->q_vectors[0];
 
-		/* temporarily disable queue cause for NAPI processing */
-		u32 qval = rd32(hw, I40E_QINT_RQCTL(0));
-
-		qval &= ~I40E_QINT_RQCTL_CAUSE_ENA_MASK;
-		wr32(hw, I40E_QINT_RQCTL(0), qval);
-
-		qval = rd32(hw, I40E_QINT_TQCTL(0));
-		qval &= ~I40E_QINT_TQCTL_CAUSE_ENA_MASK;
-		wr32(hw, I40E_QINT_TQCTL(0), qval);
-
+		/* We do not have a way to disarm Queue causes while leaving
+		 * interrupt enabled for all other causes, ideally
+		 * interrupt should be disabled while we are in NAPI but
+		 * this is not a performance path and napi_schedule()
+		 * can deal with rescheduling.
+		 */
 		if (!test_bit(__I40E_DOWN, &pf->state))
 			napi_schedule_irqoff(&q_vector->napi);
 	}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 25e378c..65f2fd8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2051,19 +2051,6 @@ tx_only:
 	if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
 		i40e_update_enable_itr(vsi, q_vector);
 	} else { /* Legacy mode */
-		struct i40e_hw *hw = &vsi->back->hw;
-		/* We re-enable the queue 0 cause, but
-		 * don't worry about dynamic_enable
-		 * because we left it on for the other
-		 * possible interrupts during napi
-		 */
-		u32 qval = rd32(hw, I40E_QINT_RQCTL(0)) |
-			   I40E_QINT_RQCTL_CAUSE_ENA_MASK;
-
-		wr32(hw, I40E_QINT_RQCTL(0), qval);
-		qval = rd32(hw, I40E_QINT_TQCTL(0)) |
-		       I40E_QINT_TQCTL_CAUSE_ENA_MASK;
-		wr32(hw, I40E_QINT_TQCTL(0), qval);
 		i40e_irq_dynamic_enable_icr0(vsi->back, false);
 	}
 	return 0;
-- 
2.5.0

[net-next 10/15] i40e: expand comment

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

Explain why we cannot remove this code, even though it works differently
than any of our other interrupt cause handling code.

Change-ID: Ie66203bd037a466066036611c31d44f759ec5176
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 597f209..5dcd198 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2037,7 +2037,11 @@ int i40e_vc_process_vflr_event(struct i40e_pf *pf)
 	if (!test_bit(__I40E_VFLR_EVENT_PENDING, &pf->state))
 		return 0;
 
-	/* re-enable vflr interrupt cause */
+	/* Re-enable the VFLR interrupt cause here, before looking for which
+	 * VF got reset. Otherwise, if another VF gets a reset while the
+	 * first one is being processed, that interrupt will be lost, and
+	 * that VF will be stuck in reset forever.
+	 */
 	reg = rd32(hw, I40E_PFINT_ICR0_ENA);
 	reg |= I40E_PFINT_ICR0_ENA_VFLR_MASK;
 	wr32(hw, I40E_PFINT_ICR0_ENA, reg);
-- 
2.5.0

[net-next 11/15] i40e: better error reporting for nvmupdate

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

Make sure we return EBUSY while finishing up a reset, and add a few bits
for better debug messages.

Change-ID: I23f6c28a8d96d7aa171abcc265737cec7826c292
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 39 +++++++++++++-------------
 drivers/net/ethernet/intel/i40e/i40e_main.c    |  5 +++-
 2 files changed, 24 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 5778f9e..9fc7546b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1005,16 +1005,19 @@ static int i40e_get_eeprom(struct net_device *netdev,
 	/* check for NVMUpdate access method */
 	magic = hw->vendor_id | (hw->device_id << 16);
 	if (eeprom->magic && eeprom->magic != magic) {
-		struct i40e_nvm_access *cmd;
-		int errno;
+		struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
+		int errno = 0;
 
 		/* make sure it is the right magic for NVMUpdate */
 		if ((eeprom->magic >> 16) != hw->device_id)
-			return -EINVAL;
+			errno = -EINVAL;
+		else if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
+			 test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
+			errno = -EBUSY;
+		else
+			ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
 
-		cmd = (struct i40e_nvm_access *)eeprom;
-		ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
-		if (ret_val && (hw->debug_mask & I40E_DEBUG_NVM))
+		if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
 			dev_info(&pf->pdev->dev,
 				 "NVMUpdate read failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
 				 ret_val, hw->aq.asq_last_status, errno,
@@ -1098,27 +1101,25 @@ static int i40e_set_eeprom(struct net_device *netdev,
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_hw *hw = &np->vsi->back->hw;
 	struct i40e_pf *pf = np->vsi->back;
-	struct i40e_nvm_access *cmd;
+	struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom;
 	int ret_val = 0;
-	int errno;
+	int errno = 0;
 	u32 magic;
 
 	/* normal ethtool set_eeprom is not supported */
 	magic = hw->vendor_id | (hw->device_id << 16);
 	if (eeprom->magic == magic)
-		return -EOPNOTSUPP;
-
+		errno = -EOPNOTSUPP;
 	/* check for NVMUpdate access method */
-	if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id)
-		return -EINVAL;
-
-	if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
-	    test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
-		return -EBUSY;
+	else if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id)
+		errno = -EINVAL;
+	else if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
+		 test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
+		errno = -EBUSY;
+	else
+		ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
 
-	cmd = (struct i40e_nvm_access *)eeprom;
-	ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
-	if (ret_val && (hw->debug_mask & I40E_DEBUG_NVM))
+	if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM))
 		dev_info(&pf->pdev->dev,
 			 "NVMUpdate write failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
 			 ret_val, hw->aq.asq_last_status, errno,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 7869d74..384912b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3475,6 +3475,7 @@ static irqreturn_t i40e_intr(int irq, void *data)
 	if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) {
 		ena_mask &= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
 		set_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
+		i40e_debug(&pf->hw, I40E_DEBUG_NVM, "AdminQ event\n");
 	}
 
 	if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) {
@@ -6332,7 +6333,9 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 		case i40e_aqc_opc_nvm_erase:
 		case i40e_aqc_opc_nvm_update:
 		case i40e_aqc_opc_oem_post_update:
-			i40e_debug(&pf->hw, I40E_DEBUG_NVM, "ARQ NVM operation completed\n");
+			i40e_debug(&pf->hw, I40E_DEBUG_NVM,
+				   "ARQ NVM operation 0x%04x completed\n",
+				   opcode);
 			break;
 		default:
 			dev_info(&pf->pdev->dev,
-- 
2.5.0

[net-next 12/15] i40evf: set adapter state on reset failure

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

If a reset fails to complete, the driver gets its affairs in order and
awaits the cold solace of rmmod. Unfortunately, it was not properly
setting the adapter state, which would cause a panic on rmmod, instead
of the desired surcease.

Set the adapter state to DOWN in this case, and avoid a panic.

Change-ID: I6fdd9906da52e023f8dc744f7da44b5d95278ca9
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1176326..cbb7507 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1883,6 +1883,7 @@ static void i40evf_reset_task(struct work_struct *work)
 		adapter->netdev->flags &= ~IFF_UP;
 		clear_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section);
 		adapter->flags &= ~I40EVF_FLAG_RESET_PENDING;
+		adapter->state = __I40EVF_DOWN;
 		dev_info(&adapter->pdev->dev, "Reset task did not complete, VF disabled\n");
 		return; /* Do not attempt to reinit. It's dead, Jim. */
 	}
-- 
2.5.0

[net-next 13/15] i40e: clean event descriptor before use

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

In one obscure corner case, it was possible to clear the NVM update wait
flag when no update_done message was actually received.  This patch
cleans the event descriptor before use, and moves the opcode check to
where it won't get done if there was no event to clean.

Also update copyright year in file headers.

Change-ID: I68bbc41965e93f4adf07cbe98b9dfd63d41509a4
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq.c   | 20 +++++++++++---------
 drivers/net/ethernet/intel/i40evf/i40e_adminq.c |  5 ++++-
 2 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index 1fd5ea8..df8e2fd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -953,6 +953,9 @@ i40e_status i40e_clean_arq_element(struct i40e_hw *hw,
 	u16 flags;
 	u16 ntu;
 
+	/* pre-clean the event info */
+	memset(&e->desc, 0, sizeof(e->desc));
+
 	/* take the lock before we start messing with the ring */
 	mutex_lock(&hw->aq.arq_mutex);
 
@@ -1020,14 +1023,6 @@ i40e_status i40e_clean_arq_element(struct i40e_hw *hw,
 	hw->aq.arq.next_to_clean = ntc;
 	hw->aq.arq.next_to_use = ntu;
 
-clean_arq_element_out:
-	/* Set pending if needed, unlock and return */
-	if (pending != NULL)
-		*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
-
-clean_arq_element_err:
-	mutex_unlock(&hw->aq.arq_mutex);
-
 	if (i40e_is_nvm_update_op(&e->desc)) {
 		if (hw->aq.nvm_release_on_done) {
 			i40e_release_nvm(hw);
@@ -1048,6 +1043,13 @@ clean_arq_element_err:
 		}
 	}
 
+clean_arq_element_out:
+	/* Set pending if needed, unlock and return */
+	if (pending)
+		*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
+clean_arq_element_err:
+	mutex_unlock(&hw->aq.arq_mutex);
+
 	return ret_code;
 }
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
index 3f65e39..44f7ed7 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -887,6 +887,9 @@ i40e_status i40evf_clean_arq_element(struct i40e_hw *hw,
 	u16 flags;
 	u16 ntu;
 
+	/* pre-clean the event info */
+	memset(&e->desc, 0, sizeof(e->desc));
+
 	/* take the lock before we start messing with the ring */
 	mutex_lock(&hw->aq.arq_mutex);
 
-- 
2.5.0

[net-next 14/15] i40e: When in promisc mode apply promisc mode to Tx Traffic as well

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

In MFP mode particularly when we were setting the PF VSI in limited
promiscuous, the HW switch was still mirroring the outgoing packets
from other VSIs (VF/VMdq) onto the PF VSI.

With this new bit set, the mirroring doesn't happen any more and so
we are in limited promiscuous on the PF VSI in MFP which is similar
to defport.

An API check is not required, since this bit is reserved for FW API
version < 1.5

Also update copyright year in file headers.

Change-ID: I9840cb95f11dde733d943cb03ce84f68b9611bc8
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h   | 3 ++-
 drivers/net/ethernet/intel/i40e/i40e_common.c       | 9 ++++++++-
 drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 3 ++-
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 5699299..bb7ecbb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -1087,6 +1087,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes {
 #define I40E_AQC_SET_VSI_PROMISC_BROADCAST	0x04
 #define I40E_AQC_SET_VSI_DEFAULT		0x08
 #define I40E_AQC_SET_VSI_PROMISC_VLAN		0x10
+#define I40E_AQC_SET_VSI_PROMISC_TX		0x8000
 	__le16	seid;
 #define I40E_AQC_VSI_PROM_CMD_SEID_MASK		0x3FF
 	__le16	vlan_tag;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 354e36c..f923933 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1952,12 +1952,19 @@ i40e_status i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw,
 	i40e_fill_default_direct_cmd_desc(&desc,
 					i40e_aqc_opc_set_vsi_promiscuous_modes);
 
-	if (set)
+	if (set) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
+		if (((hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver >= 5)) ||
+		    (hw->aq.api_maj_ver > 1))
+			flags |= I40E_AQC_SET_VSI_PROMISC_TX;
+	}
 
 	cmd->promiscuous_flags = cpu_to_le16(flags);
 
 	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
+	if (((hw->aq.api_maj_ver >= 1) && (hw->aq.api_min_ver >= 5)) ||
+	    (hw->aq.api_maj_ver > 1))
+		cmd->valid_flags |= cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_TX);
 
 	cmd->seid = cpu_to_le16(seid);
 	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index ed963bc..815e481 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -1084,6 +1084,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes {
 #define I40E_AQC_SET_VSI_PROMISC_BROADCAST	0x04
 #define I40E_AQC_SET_VSI_DEFAULT		0x08
 #define I40E_AQC_SET_VSI_PROMISC_VLAN		0x10
+#define I40E_AQC_SET_VSI_PROMISC_TX		0x8000
 	__le16	seid;
 #define I40E_AQC_VSI_PROM_CMD_SEID_MASK		0x3FF
 	__le16	vlan_tag;
-- 
2.5.0

[net-next 15/15] i40e/i40evf: Bump i40e to 1.4.15 and i40evf to 1.4.11.

[Jeff Kirsher]

From: Catherine Sullivan <catherine.sullivan@intel.com>

Bump.

Change-ID: Ie280dc67e37a1cf667c3469499a4fb90f4177b75
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 384912b..16e5e0b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -46,7 +46,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 1
 #define DRV_VERSION_MINOR 4
-#define DRV_VERSION_BUILD 13
+#define DRV_VERSION_BUILD 15
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index cbb7507..41369a3 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -38,7 +38,7 @@ static const char i40evf_driver_string[] =
 
 #define DRV_VERSION_MAJOR 1
 #define DRV_VERSION_MINOR 4
-#define DRV_VERSION_BUILD 9
+#define DRV_VERSION_BUILD 11
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD) \
-- 
2.5.0

Re: [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-02-17

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 18 Feb 2016 01:03:57 -0800

> This series contains updates to i40e/i40evf once again.

Pulled, althugh I hope you guys don't get audited on that page refcount
donation.