From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, idosch@mellanox.com, eladr@mellanox.com,
yotamg@mellanox.com, ogerlitz@mellanox.com, yishaih@mellanox.com,
dledford@redhat.com, sean.hefty@intel.com,
hal.rosenstock@gmail.com, eugenia@mellanox.com,
roopa@cumulusnetworks.com, nikolay@cumulusnetworks.com,
hadarh@mellanox.com, jhs@mojatatu.com, john.fastabend@gmail.com,
jeffrey.t.kirsher@intel.com, brouer@redhat.com,
ivecera@redhat.com, rami.rosen@intel.com
Subject: [patch net-next 3/9] mlx4: Implement port type setting via devlink interface
Date: Mon, 22 Feb 2016 19:31:58 +0100 [thread overview]
Message-ID: <1456165924-14399-4-git-send-email-jiri@resnulli.us> (raw)
In-Reply-To: <1456165924-14399-1-git-send-email-jiri@resnulli.us>
From: Jiri Pirko <jiri@mellanox.com>
So far, there has been an mlx4-specific sysfs file allowing user to
change port type to either Ethernet of InfiniBand. This is very
inconvenient.
Allow to expose the same ability to set port type in a generic way
using devlink interface.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 86 +++++++++++++++++++++++--------
1 file changed, 65 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index a5f54a5..4bac714 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1052,36 +1052,20 @@ static ssize_t show_port_type(struct device *dev,
return strlen(buf);
}
-static ssize_t set_port_type(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int __set_port_type(struct mlx4_port_info *info,
+ enum mlx4_port_type port_type)
{
- struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
- port_attr);
struct mlx4_dev *mdev = info->dev;
struct mlx4_priv *priv = mlx4_priv(mdev);
enum mlx4_port_type types[MLX4_MAX_PORTS];
enum mlx4_port_type new_types[MLX4_MAX_PORTS];
- static DEFINE_MUTEX(set_port_type_mutex);
int i;
int err = 0;
- mutex_lock(&set_port_type_mutex);
-
- if (!strcmp(buf, "ib\n"))
- info->tmp_type = MLX4_PORT_TYPE_IB;
- else if (!strcmp(buf, "eth\n"))
- info->tmp_type = MLX4_PORT_TYPE_ETH;
- else if (!strcmp(buf, "auto\n"))
- info->tmp_type = MLX4_PORT_TYPE_AUTO;
- else {
- mlx4_err(mdev, "%s is not supported port type\n", buf);
- err = -EINVAL;
- goto err_out;
- }
-
mlx4_stop_sense(mdev);
mutex_lock(&priv->port_mutex);
+ info->tmp_type = port_type;
+
/* Possible type is always the one that was delivered */
mdev->caps.possible_type[info->port] = info->tmp_type;
@@ -1123,6 +1107,37 @@ static ssize_t set_port_type(struct device *dev,
out:
mlx4_start_sense(mdev);
mutex_unlock(&priv->port_mutex);
+
+ return err;
+}
+
+static ssize_t set_port_type(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+ port_attr);
+ struct mlx4_dev *mdev = info->dev;
+ enum mlx4_port_type port_type;
+ static DEFINE_MUTEX(set_port_type_mutex);
+ int err;
+
+ mutex_lock(&set_port_type_mutex);
+
+ if (!strcmp(buf, "ib\n")) {
+ port_type = MLX4_PORT_TYPE_IB;
+ } else if (!strcmp(buf, "eth\n")) {
+ port_type = MLX4_PORT_TYPE_ETH;
+ } else if (!strcmp(buf, "auto\n")) {
+ port_type = MLX4_PORT_TYPE_AUTO;
+ } else {
+ mlx4_err(mdev, "%s is not supported port type\n", buf);
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ err = __set_port_type(info, port_type);
+
err_out:
mutex_unlock(&set_port_type_mutex);
@@ -3651,6 +3666,35 @@ err_disable_pdev:
return err;
}
+static int mlx4_devlink_port_type_set(struct devlink_port *devlink_port,
+ enum devlink_port_type port_type)
+{
+ struct mlx4_port_info *info = container_of(devlink_port,
+ struct mlx4_port_info,
+ devlink_port);
+ enum mlx4_port_type mlx4_port_type;
+
+ switch (port_type) {
+ case DEVLINK_PORT_TYPE_AUTO:
+ mlx4_port_type = MLX4_PORT_TYPE_AUTO;
+ break;
+ case DEVLINK_PORT_TYPE_ETH:
+ mlx4_port_type = MLX4_PORT_TYPE_ETH;
+ break;
+ case DEVLINK_PORT_TYPE_IB:
+ mlx4_port_type = MLX4_PORT_TYPE_IB;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return __set_port_type(info, mlx4_port_type);
+}
+
+static const struct devlink_ops mlx4_devlink_ops = {
+ .port_type_set = mlx4_devlink_port_type_set,
+};
+
static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct devlink *devlink;
@@ -3660,7 +3704,7 @@ static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
printk_once(KERN_INFO "%s", mlx4_version);
- devlink = devlink_alloc(NULL, sizeof(*priv));
+ devlink = devlink_alloc(&mlx4_devlink_ops, sizeof(*priv));
if (!devlink)
return -ENOMEM;
priv = devlink_priv(devlink);
--
2.5.0
next prev parent reply other threads:[~2016-02-22 18:32 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 18:31 [patch net-next 0/9] Introduce devlink interface and first drivers to use it Jiri Pirko
2016-02-22 18:31 ` [patch net-next 1/9] Introduce devlink infrastructure Jiri Pirko
2016-02-22 22:29 ` roopa
2016-02-23 7:47 ` Jiri Pirko
2016-02-24 7:02 ` Yuval Mintz
2016-02-24 10:56 ` Jiri Pirko
2016-02-22 18:31 ` [patch net-next 2/9] mlx4: Implement devlink interface Jiri Pirko
2016-02-22 18:31 ` Jiri Pirko [this message]
2016-02-23 11:26 ` [patch net-next 3/9] mlx4: Implement port type setting via " Hannes Frederic Sowa
2016-02-23 12:21 ` Jiri Pirko
2016-02-23 13:28 ` Hannes Frederic Sowa
2016-02-23 14:26 ` Jiri Pirko
2016-02-23 15:16 ` Hannes Frederic Sowa
2016-02-23 15:30 ` Jiri Pirko
2016-02-23 15:57 ` Hannes Frederic Sowa
2016-02-23 16:04 ` Jiri Pirko
2016-02-23 16:45 ` Hannes Frederic Sowa
2016-02-23 16:55 ` Jiri Pirko
2016-02-23 17:07 ` Hannes Frederic Sowa
2016-02-23 15:20 ` Andy Gospodarek
2016-02-23 15:31 ` Jiri Pirko
2016-02-23 18:16 ` David Miller
2016-02-23 17:31 ` Stephen Hemminger
2016-02-24 7:15 ` Jiri Pirko
2016-02-22 18:31 ` [patch net-next 4/9] mlxsw: Implement " Jiri Pirko
2016-02-22 18:32 ` [patch net-next 5/9] mlxsw: core: Add devlink port splitter callbacks Jiri Pirko
2016-02-22 18:32 ` [patch net-next 6/9] mlxsw: spectrum: Unmap local port from module during teardown Jiri Pirko
2016-02-22 20:32 ` John Fastabend
2016-02-22 21:00 ` Ido Schimmel
2016-02-22 21:08 ` John Fastabend
2016-02-23 4:50 ` Andy Gospodarek
2016-02-22 18:32 ` [patch net-next 7/9] mlxsw: spectrum: Store local port to module mapping during init Jiri Pirko
2016-02-22 18:32 ` [patch net-next 8/9] mlxsw: spectrum: Mark unused ports using NULL Jiri Pirko
2016-02-22 18:32 ` [patch net-next 9/9] mlxsw: spectrum: Introduce port splitting Jiri Pirko
2016-02-23 5:12 ` [patch net-next 0/9] Introduce devlink interface and first drivers to use it Andy Gospodarek
2016-02-23 7:32 ` Jiri Pirko
2016-02-23 14:34 ` Andy Gospodarek
2016-02-23 14:45 ` Jiri Pirko
2016-02-23 15:55 ` Andy Gospodarek
2016-02-23 16:01 ` Jiri Pirko
2016-02-23 16:19 ` Andy Gospodarek
2016-02-23 16:23 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456165924-14399-4-git-send-email-jiri@resnulli.us \
--to=jiri@resnulli.us \
--cc=brouer@redhat.com \
--cc=davem@davemloft.net \
--cc=dledford@redhat.com \
--cc=eladr@mellanox.com \
--cc=eugenia@mellanox.com \
--cc=hadarh@mellanox.com \
--cc=hal.rosenstock@gmail.com \
--cc=idosch@mellanox.com \
--cc=ivecera@redhat.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jhs@mojatatu.com \
--cc=john.fastabend@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nikolay@cumulusnetworks.com \
--cc=ogerlitz@mellanox.com \
--cc=rami.rosen@intel.com \
--cc=roopa@cumulusnetworks.com \
--cc=sean.hefty@intel.com \
--cc=yishaih@mellanox.com \
--cc=yotamg@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).