From: Jamal Hadi Salim <jhs@mojatatu.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, daniel@iogearbox.net,
xiyou.wangcong@gmail.com, Jamal Hadi Salim <jhs@mojatatu.com>
Subject: [net-next-2.6 v3 2/3] Support to encoding decoding skb mark on IFE action
Date: Fri, 26 Feb 2016 17:43:24 -0500 [thread overview]
Message-ID: <1456526605-15774-3-git-send-email-jhs@emojatatu.com> (raw)
In-Reply-To: <1456526605-15774-1-git-send-email-jhs@emojatatu.com>
From: Jamal Hadi Salim <jhs@mojatatu.com>
Example usage:
Set the skb using skbedit then allow it to be encoded
sudo tc qdisc add dev $ETH root handle 1: prio
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbedit mark 17 \
action ife encode \
allow mark \
dst 02:15:15:15:15:15
Note: You dont need the skbedit action if you are already encoding the
skb mark earlier. A zero skb mark, when seen, will not be encoded.
Alternative hard code static mark of 0x12 every time the filter matches
sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action ife encode \
type 0xDEAD \
use mark 0x12 \
dst 02:15:15:15:15:15
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
---
net/sched/Kconfig | 5 +++
net/sched/Makefile | 1 +
net/sched/act_meta_mark.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 85 insertions(+)
create mode 100644 net/sched/act_meta_mark.c
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 4d48ef5..85854c0 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -751,6 +751,11 @@ config NET_ACT_IFE
To compile this code as a module, choose M here: the
module will be called act_ife.
+config NET_IFE_SKBMARK
+ tristate "Support to encoding decoding skb mark on IFE action"
+ depends on NET_ACT_IFE
+ ---help---
+
config NET_CLS_IND
bool "Incoming device classification"
depends on NET_CLS_U32 || NET_CLS_FW
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 3d17667..3f7a182 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_ACT_VLAN) += act_vlan.o
obj-$(CONFIG_NET_ACT_BPF) += act_bpf.o
obj-$(CONFIG_NET_ACT_CONNMARK) += act_connmark.o
obj-$(CONFIG_NET_ACT_IFE) += act_ife.o
+obj-$(CONFIG_NET_IFE_SKBMARK) += act_meta_mark.o
obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o
diff --git a/net/sched/act_meta_mark.c b/net/sched/act_meta_mark.c
new file mode 100644
index 0000000..8289217
--- /dev/null
+++ b/net/sched/act_meta_mark.c
@@ -0,0 +1,79 @@
+/*
+ * net/sched/act_meta_mark.c IFE skb->mark metadata module
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * copyright Jamal Hadi Salim (2015)
+ *
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <net/netlink.h>
+#include <net/pkt_sched.h>
+#include <uapi/linux/tc_act/tc_ife.h>
+#include <net/tc_act/tc_ife.h>
+#include <linux/rtnetlink.h>
+
+static int skbmark_encode(struct sk_buff *skb, void *skbdata,
+ struct tcf_meta_info *e)
+{
+ u32 ifemark = skb->mark;
+
+ return ife_encode_meta_u32(ifemark, skbdata, e);
+}
+
+static int skbmark_decode(struct sk_buff *skb, void *data, u16 len)
+{
+ u32 ifemark = *(u32 *)data;
+
+ skb->mark = ntohl(ifemark);
+ return 0;
+}
+
+static int skbmark_check(struct sk_buff *skb, struct tcf_meta_info *e)
+{
+ return ife_check_meta_u32(skb->mark, e);
+}
+
+static struct tcf_meta_ops ife_skbmark_ops = {
+ .metaid = IFE_META_SKBMARK,
+ .metatype = NLA_U32,
+ .name = "skbmark",
+ .synopsis = "skb mark 32 bit metadata",
+ .check_presence = skbmark_check,
+ .encode = skbmark_encode,
+ .decode = skbmark_decode,
+ .get = ife_get_meta_u32,
+ .alloc = ife_alloc_meta_u32,
+ .release = ife_release_meta_gen,
+ .validate = ife_validate_meta_u32,
+ .owner = THIS_MODULE,
+};
+
+static int __init ifemark_init_module(void)
+{
+ return register_ife_op(&ife_skbmark_ops);
+}
+
+static void __exit ifemark_cleanup_module(void)
+{
+ unregister_ife_op(&ife_skbmark_ops);
+}
+
+module_init(ifemark_init_module);
+module_exit(ifemark_cleanup_module);
+
+MODULE_AUTHOR("Jamal Hadi Salim(2015)");
+MODULE_DESCRIPTION("Inter-FE skb mark metadata module");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_IFE_META(IFE_META_SKBMARK);
--
1.9.1
next prev parent reply other threads:[~2016-02-26 22:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 22:43 [net-next-2.6 v3 0/3] net_sched: Add support for IFE action Jamal Hadi Salim
2016-02-26 22:43 ` [net-next-2.6 v3 1/3] introduce " Jamal Hadi Salim
2016-02-26 23:49 ` Cong Wang
2016-02-27 12:27 ` Jamal Hadi Salim
2016-02-26 22:43 ` Jamal Hadi Salim [this message]
2016-02-26 22:43 ` [net-next-2.6 v3 3/3] Support to encoding decoding skb prio on " Jamal Hadi Salim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456526605-15774-3-git-send-email-jhs@emojatatu.com \
--to=jhs@mojatatu.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox