From: Andrew Lunn <andrew@lunn.ch>
To: Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
netdev <netdev@vger.kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH RFC v2 15/32] net: dsa: Rename DSA probe function.
Date: Sun, 28 Feb 2016 17:41:23 +0100 [thread overview]
Message-ID: <1456677700-23027-16-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1456677700-23027-1-git-send-email-andrew@lunn.ch>
Rename the function called from the DSA to perform a probe for the
switch. This makes the normal _probe() name available for a standard
Linux device driver probe function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/bcm_sf2.c | 4 ++--
drivers/net/dsa/mv88e6060.c | 4 ++--
drivers/net/dsa/mv88e6123.c | 4 ++--
drivers/net/dsa/mv88e6131.c | 4 ++--
drivers/net/dsa/mv88e6171.c | 4 ++--
drivers/net/dsa/mv88e6352.c | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index fbb17e042e7b..c0c83c2f2691 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -135,7 +135,7 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
return BCM_SF2_STATS_SIZE;
}
-static char *bcm_sf2_sw_probe(struct device *host_dev, int sw_addr)
+static char *bcm_sf2_sw_drv_probe(struct device *host_dev, int sw_addr)
{
return "Broadcom Starfighter 2";
}
@@ -1371,7 +1371,7 @@ static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
static struct dsa_switch_driver bcm_sf2_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_BRCM,
- .probe = bcm_sf2_sw_probe,
+ .probe = bcm_sf2_sw_drv_probe,
.setup = bcm_sf2_sw_setup,
.set_addr = bcm_sf2_sw_set_addr,
.get_phy_flags = bcm_sf2_sw_get_phy_flags,
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index faf9834fe1cc..59e8b0fb8431 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -51,7 +51,7 @@ static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
return __ret; \
})
-static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
+static char *mv88e6060_drv_probe(struct device *host_dev, int sw_addr)
{
struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
int ret;
@@ -245,7 +245,7 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
static struct dsa_switch_driver mv88e6060_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_TRAILER,
- .probe = mv88e6060_probe,
+ .probe = mv88e6060_drv_probe,
.setup = mv88e6060_setup,
.set_addr = mv88e6060_set_addr,
.phy_read = mv88e6060_phy_read,
diff --git a/drivers/net/dsa/mv88e6123.c b/drivers/net/dsa/mv88e6123.c
index 9d39f108793b..6d6fca62e8b1 100644
--- a/drivers/net/dsa/mv88e6123.c
+++ b/drivers/net/dsa/mv88e6123.c
@@ -29,7 +29,7 @@ static const struct mv88e6xxx_switch_id mv88e6123_table[] = {
{ PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
};
-static char *mv88e6123_probe(struct device *host_dev, int sw_addr)
+static char *mv88e6123_drv_probe(struct device *host_dev, int sw_addr)
{
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6123_table,
ARRAY_SIZE(mv88e6123_table));
@@ -103,7 +103,7 @@ static int mv88e6123_setup(struct dsa_switch *ds, struct device *dev)
struct dsa_switch_driver mv88e6123_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
- .probe = mv88e6123_probe,
+ .probe = mv88e6123_drv_probe,
.setup = mv88e6123_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read,
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 3103b4953af4..e0aa3be7f5a9 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -25,7 +25,7 @@ static const struct mv88e6xxx_switch_id mv88e6131_table[] = {
{ PORT_SWITCH_ID_6185, "Marvell 88E6185" },
};
-static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
+static char *mv88e6131_drv_probe(struct device *host_dev, int sw_addr)
{
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6131_table,
ARRAY_SIZE(mv88e6131_table));
@@ -160,7 +160,7 @@ mv88e6131_phy_write(struct dsa_switch *ds,
struct dsa_switch_driver mv88e6131_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_DSA,
- .probe = mv88e6131_probe,
+ .probe = mv88e6131_drv_probe,
.setup = mv88e6131_setup,
.set_addr = mv88e6xxx_set_addr_direct,
.phy_read = mv88e6131_phy_read,
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 29a77366afc6..8fc4db23744e 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -24,7 +24,7 @@ static const struct mv88e6xxx_switch_id mv88e6171_table[] = {
{ PORT_SWITCH_ID_6351, "Marvell 88E6351" },
};
-static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
+static char *mv88e6171_drv_probe(struct device *host_dev, int sw_addr)
{
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6171_table,
ARRAY_SIZE(mv88e6171_table));
@@ -89,7 +89,7 @@ static int mv88e6171_setup(struct dsa_switch *ds, struct device *dev)
struct dsa_switch_driver mv88e6171_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
- .probe = mv88e6171_probe,
+ .probe = mv88e6171_drv_probe,
.setup = mv88e6171_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read_indirect,
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index eb57a379b9cc..2877ad8acefa 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -36,7 +36,7 @@ static const struct mv88e6xxx_switch_id mv88e6352_table[] = {
{ PORT_SWITCH_ID_6352_A1, "Marvell 88E6352 (A1)" },
};
-static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
+static char *mv88e6352_drv_probe(struct device *host_dev, int sw_addr)
{
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6352_table,
ARRAY_SIZE(mv88e6352_table));
@@ -302,7 +302,7 @@ static int mv88e6352_set_eeprom(struct dsa_switch *ds,
struct dsa_switch_driver mv88e6352_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
- .probe = mv88e6352_probe,
+ .probe = mv88e6352_drv_probe,
.setup = mv88e6352_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read_indirect,
--
2.7.0
next prev parent reply other threads:[~2016-02-28 16:42 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-28 16:41 [PATCH RFC v2 00/32] Make DSA switches linux devices Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 01/32] net: dsa: Move platform data allocation for OF Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 02/32] dsa: Rename mv88e6123_61_65 to mv88e6123 to be consistent Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 03/32] dsa: Make setup and finish more symmetrical Andrew Lunn
2016-03-11 23:54 ` Florian Fainelli
2016-02-28 16:41 ` [PATCH RFC v2 04/32] net: dsa: Pass the dsa device to the switch drivers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 05/32] net: dsa: Have the switch driver allocate there own private memory Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 06/32] net: dsa: Remove allocation of driver " Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 07/32] net: dsa: Keep the mii bus and address in the private structure Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 08/32] net: dsa: dsa.c: Refactor to increase symmetry Andrew Lunn
2016-03-11 23:54 ` Florian Fainelli
2016-02-28 16:41 ` [PATCH RFC v2 09/32] driver: component: Add support for empty match table Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 10/32] net: dsa: Add basic support for component master support Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 11/32] net: dsa: Keep a reference to the switch device for component matching Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 12/32] net: dsa: Add slave component matches based on a phandle to the slave Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 13/32] net: dsa: Make dsa,mii-bus optional Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 14/32] net: dsa: Add register/unregister functions for switch drivers Andrew Lunn
2016-02-28 16:41 ` Andrew Lunn [this message]
2016-02-28 16:41 ` [PATCH RFC v2 16/32] dsa: mv88e6xxx: Use bus in mv88e6xxx_lookup_name() Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 17/32] dsa: mv88e6xxx: Add shared code for binding/unbinding a switch driver Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 18/32] dsa: mv88e6xxx: Prepare for turning this into a library module Andrew Lunn
2016-02-29 2:40 ` Vivien Didelot
2016-02-29 14:53 ` Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 19/32] dsa: mv88e6xxx: Add macro for registering the drivers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 20/32] dsa: Add mdio device support to Marvell switches Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 21/32] net: mdio: Add mdiodev_{read|write} helpers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 22/32] net: dsa: Better integrate the drivers with mdio device Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 23/32] net: dsa: bcm_sf2: make it a real platform driver Andrew Lunn
2016-03-03 18:33 ` Florian Fainelli
2016-03-03 19:12 ` Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 24/32] net: dsa: Add some debug prints for error cases Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 25/32] net: dsa: Setup the switches after all have been probed Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 26/32] net: dsa: Only setup platform switches, not device switches Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 27/32] net: dsa: If a switch fails to probe, defer probing Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 28/32] Documentation: DSA: Describe how probe of DSA and switches work Andrew Lunn
2016-02-29 11:42 ` Sergei Shtylyov
2016-02-28 16:41 ` [PATCH RFC v2 29/32] dsa: slave: Don't reference NULL pointer during phy_disconnect Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 30/32] dsa: Destroy fixed link phys after the phy has been disconnected Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 31/32] dsa: dsa: Fix freeing of fixed-phys from user ports Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 32/32] phy: fixed: Fix removal of phys Andrew Lunn
2016-03-03 18:49 ` [PATCH RFC v2 00/32] Make DSA switches linux devices Florian Fainelli
2016-03-03 20:27 ` Andrew Lunn
2016-03-11 23:41 ` Florian Fainelli
2016-03-12 17:08 ` Andrew Lunn
2016-03-13 7:26 ` Vivien Didelot
2016-03-14 19:36 ` Florian Fainelli
2016-03-14 20:51 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456677700-23027-16-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).