From: Andrew Lunn <andrew@lunn.ch>
To: Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
netdev <netdev@vger.kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH RFC v2 07/32] net: dsa: Keep the mii bus and address in the private structure
Date: Sun, 28 Feb 2016 17:41:15 +0100 [thread overview]
Message-ID: <1456677700-23027-8-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1456677700-23027-1-git-send-email-andrew@lunn.ch>
Rather than looking up the mii bus and address every time, do it once
and setup, and keep it in the private structure.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
v2: Add check for valid mii_bus.
---
drivers/net/dsa/mv88e6060.c | 27 +++++++++++++++++----------
drivers/net/dsa/mv88e6060.h | 11 +++++++++++
drivers/net/dsa/mv88e6xxx.c | 19 +++++++++----------
drivers/net/dsa/mv88e6xxx.h | 6 ++++++
4 files changed, 43 insertions(+), 20 deletions(-)
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 34bc374882c7..faf9834fe1cc 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -19,12 +19,9 @@
static int reg_read(struct dsa_switch *ds, int addr, int reg)
{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ struct mv88e6060_priv *priv = ds_to_priv(ds);
- if (bus == NULL)
- return -EINVAL;
-
- return mdiobus_read_nested(bus, ds->pd->sw_addr + addr, reg);
+ return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
}
#define REG_READ(addr, reg) \
@@ -40,12 +37,9 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg)
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
-
- if (bus == NULL)
- return -EINVAL;
+ struct mv88e6060_priv *priv = ds_to_priv(ds);
- return mdiobus_write_nested(bus, ds->pd->sw_addr + addr, reg, val);
+ return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}
#define REG_WRITE(addr, reg, val) \
@@ -176,6 +170,19 @@ static int mv88e6060_setup(struct dsa_switch *ds, struct device *dev)
{
int i;
int ret;
+ struct mv88e6060_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ds->priv = priv;
+
+ priv->bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ if (!priv->bus)
+ return -ENODEV;
+
+ priv->sw_addr = ds->pd->sw_addr;
ret = mv88e6060_switch_reset(ds);
if (ret < 0)
diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h
index cc9b2ed4aff4..10249bd16292 100644
--- a/drivers/net/dsa/mv88e6060.h
+++ b/drivers/net/dsa/mv88e6060.h
@@ -108,4 +108,15 @@
#define GLOBAL_ATU_MAC_23 0x0e
#define GLOBAL_ATU_MAC_45 0x0f
+struct mv88e6060_priv {
+ /* MDIO bus and address on bus to use. When in single chip
+ * mode, address is 0, and the switch uses multiple addresses
+ * on the bus. When in multi-chip mode, the switch uses a
+ * single address which contains two registers used for
+ * indirect access to more registers.
+ */
+ struct mii_bus *bus;
+ int sw_addr;
+};
+
#endif
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index c2d26168fdf8..2e945f325db1 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -94,15 +94,12 @@ static int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr,
static int _mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret;
assert_smi_lock(ds);
- if (bus == NULL)
- return -EINVAL;
-
- ret = __mv88e6xxx_reg_read(bus, ds->pd->sw_addr, addr, reg);
+ ret = __mv88e6xxx_reg_read(ps->bus, ps->sw_addr, addr, reg);
if (ret < 0)
return ret;
@@ -159,17 +156,14 @@ static int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
static int _mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg,
u16 val)
{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
assert_smi_lock(ds);
- if (bus == NULL)
- return -EINVAL;
-
dev_dbg(ds->master_dev, "-> addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n",
addr, reg, val);
- return __mv88e6xxx_reg_write(bus, ds->pd->sw_addr, addr, reg, val);
+ return __mv88e6xxx_reg_write(ps->bus, ps->sw_addr, addr, reg, val);
}
int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
@@ -2210,6 +2204,11 @@ int mv88e6xxx_setup_common(struct dsa_switch *ds, struct device *dev)
ds->priv = ps;
ps->ds = ds;
+ ps->bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ if (!ps->bus)
+ return -ENODEV;
+
+ ps->sw_addr = ds->pd->sw_addr;
mutex_init(&ps->smi_mutex);
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 8a13162353cd..53f2fc82069b 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -389,6 +389,12 @@ struct mv88e6xxx_priv_state {
*/
struct mutex smi_mutex;
+ /* The MII bus and the address on the bus that is used to
+ * communication with the switch
+ */
+ struct mii_bus *bus;
+ int sw_addr;
+
#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
/* Handles automatic disabling and re-enabling of the PHY
* polling unit.
--
2.7.0
next prev parent reply other threads:[~2016-02-28 16:42 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-28 16:41 [PATCH RFC v2 00/32] Make DSA switches linux devices Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 01/32] net: dsa: Move platform data allocation for OF Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 02/32] dsa: Rename mv88e6123_61_65 to mv88e6123 to be consistent Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 03/32] dsa: Make setup and finish more symmetrical Andrew Lunn
2016-03-11 23:54 ` Florian Fainelli
2016-02-28 16:41 ` [PATCH RFC v2 04/32] net: dsa: Pass the dsa device to the switch drivers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 05/32] net: dsa: Have the switch driver allocate there own private memory Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 06/32] net: dsa: Remove allocation of driver " Andrew Lunn
2016-02-28 16:41 ` Andrew Lunn [this message]
2016-02-28 16:41 ` [PATCH RFC v2 08/32] net: dsa: dsa.c: Refactor to increase symmetry Andrew Lunn
2016-03-11 23:54 ` Florian Fainelli
2016-02-28 16:41 ` [PATCH RFC v2 09/32] driver: component: Add support for empty match table Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 10/32] net: dsa: Add basic support for component master support Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 11/32] net: dsa: Keep a reference to the switch device for component matching Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 12/32] net: dsa: Add slave component matches based on a phandle to the slave Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 13/32] net: dsa: Make dsa,mii-bus optional Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 14/32] net: dsa: Add register/unregister functions for switch drivers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 15/32] net: dsa: Rename DSA probe function Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 16/32] dsa: mv88e6xxx: Use bus in mv88e6xxx_lookup_name() Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 17/32] dsa: mv88e6xxx: Add shared code for binding/unbinding a switch driver Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 18/32] dsa: mv88e6xxx: Prepare for turning this into a library module Andrew Lunn
2016-02-29 2:40 ` Vivien Didelot
2016-02-29 14:53 ` Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 19/32] dsa: mv88e6xxx: Add macro for registering the drivers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 20/32] dsa: Add mdio device support to Marvell switches Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 21/32] net: mdio: Add mdiodev_{read|write} helpers Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 22/32] net: dsa: Better integrate the drivers with mdio device Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 23/32] net: dsa: bcm_sf2: make it a real platform driver Andrew Lunn
2016-03-03 18:33 ` Florian Fainelli
2016-03-03 19:12 ` Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 24/32] net: dsa: Add some debug prints for error cases Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 25/32] net: dsa: Setup the switches after all have been probed Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 26/32] net: dsa: Only setup platform switches, not device switches Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 27/32] net: dsa: If a switch fails to probe, defer probing Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 28/32] Documentation: DSA: Describe how probe of DSA and switches work Andrew Lunn
2016-02-29 11:42 ` Sergei Shtylyov
2016-02-28 16:41 ` [PATCH RFC v2 29/32] dsa: slave: Don't reference NULL pointer during phy_disconnect Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 30/32] dsa: Destroy fixed link phys after the phy has been disconnected Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 31/32] dsa: dsa: Fix freeing of fixed-phys from user ports Andrew Lunn
2016-02-28 16:41 ` [PATCH RFC v2 32/32] phy: fixed: Fix removal of phys Andrew Lunn
2016-03-03 18:49 ` [PATCH RFC v2 00/32] Make DSA switches linux devices Florian Fainelli
2016-03-03 20:27 ` Andrew Lunn
2016-03-11 23:41 ` Florian Fainelli
2016-03-12 17:08 ` Andrew Lunn
2016-03-13 7:26 ` Vivien Didelot
2016-03-14 19:36 ` Florian Fainelli
2016-03-14 20:51 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456677700-23027-8-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).