[PATCH net 1/2] jme: Do not enable NIC WoL functions on S0

[PATCH net 1/2] jme: Do not enable NIC WoL functions on S0

[cooldavid]

From: Guo-Fu Tseng <cooldavid@cooldavid.org>

Otherwise it might be back on resume right after going to suspend in
some hardware.

Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
---
 drivers/net/ethernet/jme.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 8adbe8f..74b9c9d 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -270,11 +270,17 @@ jme_reset_mac_processor(struct jme_adapter *jme)
 }
 
 static inline void
-jme_clear_pm(struct jme_adapter *jme)
+jme_clear_pm_enable_wol(struct jme_adapter *jme)
 {
 	jwrite32(jme, JME_PMCS, PMCS_STMASK | jme->reg_pmcs);
 }
 
+static inline void
+jme_clear_pm_disable_wol(struct jme_adapter *jme)
+{
+	jwrite32(jme, JME_PMCS, PMCS_STMASK);
+}
+
 static int
 jme_reload_eeprom(struct jme_adapter *jme)
 {
@@ -1853,7 +1859,7 @@ jme_open(struct net_device *netdev)
 	struct jme_adapter *jme = netdev_priv(netdev);
 	int rc;
 
-	jme_clear_pm(jme);
+	jme_clear_pm_disable_wol(jme);
 	JME_NAPI_ENABLE(jme);
 
 	tasklet_init(&jme->linkch_task, jme_link_change_tasklet,
@@ -1929,7 +1935,7 @@ jme_powersave_phy(struct jme_adapter *jme)
 		jme_set_100m_half(jme);
 		if (jme->reg_pmcs & (PMCS_LFEN | PMCS_LREN))
 			jme_wait_link(jme);
-		jme_clear_pm(jme);
+		jme_clear_pm_enable_wol(jme);
 	} else {
 		jme_phy_off(jme);
 	}
@@ -2646,7 +2652,6 @@ jme_set_wol(struct net_device *netdev,
 	if (wol->wolopts & WAKE_MAGIC)
 		jme->reg_pmcs |= PMCS_MFEN;
 
-	jwrite32(jme, JME_PMCS, jme->reg_pmcs);
 	device_set_wakeup_enable(&jme->pdev->dev, !!(jme->reg_pmcs));
 
 	return 0;
@@ -3172,7 +3177,7 @@ jme_init_one(struct pci_dev *pdev,
 	jme->mii_if.mdio_read = jme_mdio_read;
 	jme->mii_if.mdio_write = jme_mdio_write;
 
-	jme_clear_pm(jme);
+	jme_clear_pm_disable_wol(jme);
 	device_set_wakeup_enable(&pdev->dev, true);
 
 	jme_set_phyfifo_5level(jme);
@@ -3304,7 +3309,7 @@ jme_resume(struct device *dev)
 	if (!netif_running(netdev))
 		return 0;
 
-	jme_clear_pm(jme);
+	jme_clear_pm_disable_wol(jme);
 	jme_phy_on(jme);
 	if (test_bit(JME_FLAG_SSET, &jme->flags))
 		jme_set_settings(netdev, &jme->old_ecmd);
-- 
1.8.5.5

[PATCH net 2/2] jme: Fix device PM wakeup API usage

[cooldavid]

From: Guo-Fu Tseng <cooldavid@cooldavid.org>

According to Documentation/power/devices.txt

The driver should not use device_set_wakeup_enable() which is the policy
for user to decide.

Using device_init_wakeup() to initialize dev->power.should_wakeup and
dev->power.can_wakeup on driver initialization.

And use device_may_wakeup() on suspend to decide if WoL function should
be enabled on NIC.

Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
---
 drivers/net/ethernet/jme.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 74b9c9d..3ddf657 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -1931,7 +1931,7 @@ jme_wait_link(struct jme_adapter *jme)
 static void
 jme_powersave_phy(struct jme_adapter *jme)
 {
-	if (jme->reg_pmcs) {
+	if (jme->reg_pmcs && device_may_wakeup(&jme->pdev->dev)) {
 		jme_set_100m_half(jme);
 		if (jme->reg_pmcs & (PMCS_LFEN | PMCS_LREN))
 			jme_wait_link(jme);
@@ -2652,8 +2652,6 @@ jme_set_wol(struct net_device *netdev,
 	if (wol->wolopts & WAKE_MAGIC)
 		jme->reg_pmcs |= PMCS_MFEN;
 
-	device_set_wakeup_enable(&jme->pdev->dev, !!(jme->reg_pmcs));
-
 	return 0;
 }
 
@@ -3178,7 +3176,7 @@ jme_init_one(struct pci_dev *pdev,
 	jme->mii_if.mdio_write = jme_mdio_write;
 
 	jme_clear_pm_disable_wol(jme);
-	device_set_wakeup_enable(&pdev->dev, true);
+	device_init_wakeup(&pdev->dev, true);
 
 	jme_set_phyfifo_5level(jme);
 	jme->pcirev = pdev->revision;
-- 
1.8.5.5

Re: [PATCH net 1/2] jme: Do not enable NIC WoL functions on S0

[David Miller]

From: cooldavid@cooldavid.org
Date: Sat,  5 Mar 2016 08:11:55 +0800

> From: Guo-Fu Tseng <cooldavid@cooldavid.org>
> 
> Otherwise it might be back on resume right after going to suspend in
> some hardware.
> 
> Reported-by: Diego Viola <diego.viola@gmail.com>
> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>

Applied.

Re: [PATCH net 2/2] jme: Fix device PM wakeup API usage

[David Miller]

From: cooldavid@cooldavid.org
Date: Sat,  5 Mar 2016 08:11:56 +0800

> From: Guo-Fu Tseng <cooldavid@cooldavid.org>
> 
> According to Documentation/power/devices.txt
> 
> The driver should not use device_set_wakeup_enable() which is the policy
> for user to decide.
> 
> Using device_init_wakeup() to initialize dev->power.should_wakeup and
> dev->power.can_wakeup on driver initialization.
> 
> And use device_may_wakeup() on suspend to decide if WoL function should
> be enabled on NIC.
> 
> Reported-by: Diego Viola <diego.viola@gmail.com>
> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>

Applied.