From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH net-next v2 4/9] bnxt_en: Add EEE setup code.
Date: Tue, 5 Apr 2016 14:08:58 -0400 [thread overview]
Message-ID: <1459879743-16960-5-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1459879743-16960-1-git-send-email-michael.chan@broadcom.com>
1. Add bnxt_hwrm_set_eee() function to setup EEE firmware parameters based
on the bp->eee settings.
2. The new function bnxt_eee_config_ok() will check if EEE parameters need
to be modified due to autoneg changes.
3. bnxt_hwrm_set_link() has added a new parameter to update EEE. If the
parameter is set, it will call bnxt_hwrm_set_eee().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 58 ++++++++++++++++++++++-
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 1 +
4 files changed, 60 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 7442e20..2c3c795 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4711,7 +4711,30 @@ int bnxt_hwrm_set_pause(struct bnxt *bp)
return rc;
}
-int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause)
+static void bnxt_hwrm_set_eee(struct bnxt *bp,
+ struct hwrm_port_phy_cfg_input *req)
+{
+ struct ethtool_eee *eee = &bp->eee;
+
+ if (eee->eee_enabled) {
+ u16 eee_speeds;
+ u32 flags = PORT_PHY_CFG_REQ_FLAGS_EEE_ENABLE;
+
+ if (eee->tx_lpi_enabled)
+ flags |= PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_ENABLE;
+ else
+ flags |= PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_DISABLE;
+
+ req->flags |= cpu_to_le32(flags);
+ eee_speeds = bnxt_get_fw_auto_link_speeds(eee->advertised);
+ req->eee_link_speed_mask = cpu_to_le16(eee_speeds);
+ req->tx_lpi_timer = cpu_to_le32(eee->tx_lpi_timer);
+ } else {
+ req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_EEE_DISABLE);
+ }
+}
+
+int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause, bool set_eee)
{
struct hwrm_port_phy_cfg_input req = {0};
@@ -4720,14 +4743,42 @@ int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause)
bnxt_hwrm_set_pause_common(bp, &req);
bnxt_hwrm_set_link_common(bp, &req);
+
+ if (set_eee)
+ bnxt_hwrm_set_eee(bp, &req);
return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
}
+static bool bnxt_eee_config_ok(struct bnxt *bp)
+{
+ struct ethtool_eee *eee = &bp->eee;
+ struct bnxt_link_info *link_info = &bp->link_info;
+
+ if (!(bp->flags & BNXT_FLAG_EEE_CAP))
+ return true;
+
+ if (eee->eee_enabled) {
+ u32 advertising =
+ _bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
+
+ if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
+ eee->eee_enabled = 0;
+ return false;
+ }
+ if (eee->advertised & ~advertising) {
+ eee->advertised = advertising & eee->supported;
+ return false;
+ }
+ }
+ return true;
+}
+
static int bnxt_update_phy_setting(struct bnxt *bp)
{
int rc;
bool update_link = false;
bool update_pause = false;
+ bool update_eee = false;
struct bnxt_link_info *link_info = &bp->link_info;
rc = bnxt_update_link(bp, true);
@@ -4757,8 +4808,11 @@ static int bnxt_update_phy_setting(struct bnxt *bp)
update_link = true;
}
+ if (!bnxt_eee_config_ok(bp))
+ update_eee = true;
+
if (update_link)
- rc = bnxt_hwrm_set_link_setting(bp, update_pause);
+ rc = bnxt_hwrm_set_link_setting(bp, update_pause, update_eee);
else if (update_pause)
rc = bnxt_hwrm_set_pause(bp);
if (rc) {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 5e83405..a981e2c 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1112,7 +1112,7 @@ int hwrm_send_message_silent(struct bnxt *, void *, u32, int);
int bnxt_hwrm_set_coal(struct bnxt *);
int bnxt_hwrm_func_qcaps(struct bnxt *);
int bnxt_hwrm_set_pause(struct bnxt *);
-int bnxt_hwrm_set_link_setting(struct bnxt *, bool);
+int bnxt_hwrm_set_link_setting(struct bnxt *, bool, bool);
int bnxt_open_nic(struct bnxt *, bool, bool);
int bnxt_close_nic(struct bnxt *, bool, bool);
int bnxt_get_max_rings(struct bnxt *, int *, int *, bool);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index bdc6220..14f0520 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -763,7 +763,7 @@ static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
return 0;
}
-static u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
+u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
{
u16 fw_speed_mask = 0;
@@ -840,7 +840,7 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
if (netif_running(dev))
- rc = bnxt_hwrm_set_link_setting(bp, set_pause);
+ rc = bnxt_hwrm_set_link_setting(bp, set_pause, false);
set_setting_exit:
return rc;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index e061f8f..3abc03b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -14,5 +14,6 @@ extern const struct ethtool_ops bnxt_ethtool_ops;
u32 _bnxt_fw_to_ethtool_adv_spds(u16, u8);
u32 bnxt_fw_to_ethtool_speed(u16);
+u16 bnxt_get_fw_auto_link_speeds(u32);
#endif
--
1.8.3.1
next prev parent reply other threads:[~2016-04-05 18:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 1/9] bnxt_en: Update to Firmware 1.2.2 spec Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 2/9] bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 3/9] bnxt_en: Add basic EEE support Michael Chan
2016-04-05 18:08 ` Michael Chan [this message]
2016-04-05 18:08 ` [PATCH net-next v2 5/9] bnxt_en: Add get_eee() and set_eee() ethtool support Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 6/9] bnxt_en: Set async event bits when registering with the firmware Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 7/9] bnxt_en: Add unsupported SFP+ module warnings Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 8/9] bnxt_en: Check for valid forced speed during ethtool -s Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 9/9] bnxt_en: Improve ethtool .get_settings() Michael Chan
2016-04-05 20:15 ` [PATCH net-next v2 0/9] bnxt_en: Updates for net-next David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459879743-16960-5-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).