From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, idosch@mellanox.com, eladr@mellanox.com,
yotamg@mellanox.com, ogerlitz@mellanox.com,
roopa@cumulusnetworks.com, gospo@cumulusnetworks.com
Subject: [patch net-next 10/17] mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)
Date: Wed, 6 Apr 2016 17:10:09 +0200 [thread overview]
Message-ID: <1459955416-23786-11-git-send-email-jiri@resnulli.us> (raw)
In-Reply-To: <1459955416-23786-1-git-send-email-jiri@resnulli.us>
From: Ido Schimmel <idosch@mellanox.com>
Introduce basic infrastructure for DCB and add the missing ops in
following patches.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/Kconfig | 8 +++
drivers/net/ethernet/mellanox/mlxsw/Makefile | 1 +
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 10 ++++
drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 17 ++++++
drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 65 ++++++++++++++++++++++
5 files changed, 101 insertions(+)
create mode 100644 drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index 2ad7f67..5989f7c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -50,3 +50,11 @@ config MLXSW_SPECTRUM
To compile this driver as a module, choose M here: the
module will be called mlxsw_spectrum.
+
+config MLXSW_SPECTRUM_DCB
+ bool "Data Center Bridging (DCB) support"
+ depends on MLXSW_SPECTRUM && DCB
+ default y
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Makefile b/drivers/net/ethernet/mellanox/mlxsw/Makefile
index 584cac4..9b5ebf8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Makefile
+++ b/drivers/net/ethernet/mellanox/mlxsw/Makefile
@@ -8,3 +8,4 @@ mlxsw_switchx2-objs := switchx2.o
obj-$(CONFIG_MLXSW_SPECTRUM) += mlxsw_spectrum.o
mlxsw_spectrum-objs := spectrum.o spectrum_buffers.o \
spectrum_switchdev.o
+mlxsw_spectrum-$(CONFIG_MLXSW_SPECTRUM_DCB) += spectrum_dcb.o
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 1243c74..baaa9ea 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1681,6 +1681,14 @@ static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
goto err_port_ets_init;
}
+ /* ETS and buffers must be initialized before DCB. */
+ err = mlxsw_sp_port_dcb_init(mlxsw_sp_port);
+ if (err) {
+ dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to initialize DCB\n",
+ mlxsw_sp_port->local_port);
+ goto err_port_dcb_init;
+ }
+
mlxsw_sp_port_switchdev_init(mlxsw_sp_port);
err = register_netdev(dev);
if (err) {
@@ -1701,6 +1709,7 @@ static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
err_port_vlan_init:
unregister_netdev(dev);
err_register_netdev:
+err_port_dcb_init:
err_port_ets_init:
err_port_buffers_init:
err_port_admin_status_set:
@@ -1771,6 +1780,7 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp *mlxsw_sp, u8 local_port)
devlink_port = &mlxsw_sp_port->devlink_port;
devlink_port_type_clear(devlink_port);
unregister_netdev(mlxsw_sp_port->dev); /* This calls ndo_stop */
+ mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
devlink_port_unregister(devlink_port);
mlxsw_sp_port_vports_fini(mlxsw_sp_port);
mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 84dddd4..1f50af8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -270,4 +270,21 @@ int mlxsw_sp_vport_flood_set(struct mlxsw_sp_port *mlxsw_sp_vport, u16 vfid,
void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port);
int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid);
+#ifdef CONFIG_MLXSW_SPECTRUM_DCB
+
+int mlxsw_sp_port_dcb_init(struct mlxsw_sp_port *mlxsw_sp_port);
+void mlxsw_sp_port_dcb_fini(struct mlxsw_sp_port *mlxsw_sp_port);
+
+#else
+
+static inline int mlxsw_sp_port_dcb_init(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+ return 0;
+}
+
+static inline void mlxsw_sp_port_dcb_fini(struct mlxsw_sp_port *mlxsw_sp_port)
+{}
+
+#endif
+
#endif
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
new file mode 100644
index 0000000..631e980
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
@@ -0,0 +1,65 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Ido Schimmel <idosch@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/netdevice.h>
+#include <net/dcbnl.h>
+
+#include "spectrum.h"
+
+static u8 mlxsw_sp_dcbnl_getdcbx(struct net_device __always_unused *dev)
+{
+ return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE;
+}
+
+static u8 mlxsw_sp_dcbnl_setdcbx(struct net_device __always_unused *dev,
+ u8 mode)
+{
+ return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0;
+}
+
+static const struct dcbnl_rtnl_ops mlxsw_sp_dcbnl_ops = {
+ .getdcbx = mlxsw_sp_dcbnl_getdcbx,
+ .setdcbx = mlxsw_sp_dcbnl_setdcbx,
+};
+
+int mlxsw_sp_port_dcb_init(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+ mlxsw_sp_port->dev->dcbnl_ops = &mlxsw_sp_dcbnl_ops;
+
+ return 0;
+}
+
+void mlxsw_sp_port_dcb_fini(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+}
--
2.5.5
next prev parent reply other threads:[~2016-04-06 15:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-06 15:09 [patch net-next 00/17] mlxsw: Introduce support for Data Center Bridging Jiri Pirko
2016-04-06 15:10 ` [patch net-next 01/17] mlxsw: reg: Add Port Prio To Buffer register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 02/17] mlxsw: spectrum: Map all switch priorities to priority group 0 Jiri Pirko
2016-04-06 15:10 ` [patch net-next 03/17] mlxsw: spectrum: Add bytes to cells helper Jiri Pirko
2016-04-06 15:10 ` [patch net-next 04/17] mlxsw: spectrum: Correctly configure headroom size Jiri Pirko
2016-04-06 15:10 ` [patch net-next 05/17] mlxsw: reg: Use correct PBMC register length Jiri Pirko
2016-04-06 15:10 ` [patch net-next 06/17] mlxsw: spectrum: Set port's shared buffer size to 0 Jiri Pirko
2016-04-06 15:10 ` [patch net-next 07/17] mlxsw: reg: Add QoS ETS Element Configuration register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 08/17] mlxsw: reg: Add QoS Switch Traffic Class Table register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 09/17] mlxsw: spectrum: Initialize egress scheduling Jiri Pirko
2016-04-06 15:10 ` Jiri Pirko [this message]
2016-04-06 15:10 ` [patch net-next 11/17] mlxsw: spectrum: Add IEEE 802.1Qaz ETS support Jiri Pirko
2016-04-06 15:10 ` [patch net-next 12/17] mlxsw: spectrum: Allow setting maximum rate for a TC Jiri Pirko
2016-04-06 15:10 ` [patch net-next 13/17] mlxsw: reg: Add Port Flow Control Configuration register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 14/17] mlxsw: reg: Add lossless settings for PBMC register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 15/17] mlxsw: spectrum: Add support for PAUSE frames Jiri Pirko
2016-04-06 15:10 ` [patch net-next 16/17] mlxsw: reg: Introduce per priority counters Jiri Pirko
2016-04-06 15:10 ` [patch net-next 17/17] mlxsw: spectrum: Add IEEE 802.1Qbb PFC support Jiri Pirko
2016-04-06 21:24 ` [patch net-next 00/17] mlxsw: Introduce support for Data Center Bridging David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459955416-23786-11-git-send-email-jiri@resnulli.us \
--to=jiri@resnulli.us \
--cc=davem@davemloft.net \
--cc=eladr@mellanox.com \
--cc=gospo@cumulusnetworks.com \
--cc=idosch@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=roopa@cumulusnetworks.com \
--cc=yotamg@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).